• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.501-504
• /
• 1999

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and a synchronizations of lossless transmission line are investigated. Since the synchronization of the transmission system is impossible by coupled synchronization, the drive-response synchronization theory were used. As a result, the chaos synchronization has delay characteristics in the lossless transmission system caused by the line parameters L and C.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.116-122
• /
• 2002

Electro Explosive Devices can be susceptible to electromagnetic interference. When these components are exposed to external electromagnetic fields, it may cause to induce sufficient current to generate enough heat for an inadvertent detonation. It is almost impossible to monitor the event of firing throughout the electromagnetic environment test. The survivability of EED for hazards of electromagnetic radiation is investigated. A fiber optic sensor is installed near the bridge wire after removing explosive material in order to measure the induced current on the bridge wire. The length of lead-wire of the EED fabricated is around 15 cm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.653-655
• /
• 2011

EPCglobal proposed a Q-algorithm, which is used for selecting a slot-count in the next query round. However, it is impossible to allocate an optimized slot-count because the original Q-algorithm did not define an optimized weight C value. In this paper, we propose an adaptive Q-algorithm, in which we differentiate the weight values with respect to collision and empty slots. The weight values are defined with the identification time as well as the collision probability.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3165-3168
• /
• 1999

When a input image is extensively magnified on the computer system, it is almost impossible to replicate the original shape because of mismatched coordinates system. In order to resolve the problem, the shape of the magnified image has been reconfigured using the bilinear interpolation method, low pass special filtering interpolation method and B-spline interpolation method. Ferguson curve interpolation method based on the CAD/CAM curve interpolation algorithm.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.20-21
• /
• 2006

Through different projects, CETIM and its scientific and industrial partners have evaluated the potential of the High Velocityy Compaction Technology in terms of materials and component shape. Various kinds of powder materials were studied: metals, ceramics and polymers. The HVC process was used with success to manufacture gears, large parts and multilevel components. Due to the high density of HVC parts, the green machining process enables shapes to be produced that would otherwise be impossible to compact and components to be produced with very hard sintered and homogeneous materials.

• Journal of Chest Surgery
• /
• v.27 no.6
• /
• pp.497-501
• /
• 1994

We have experienced a case of primary thymic carcinoma. A 39 year old female patient admitted with incidentally detected mediastinal mass on chest film.The tumor showed invasion to surrounding tissues and the mediastinal lymphadenopathies were also noted. Invasion to contiguous mediastinal structures made complete surgical extirplation impossible and the biposy findings revealed primary thymic carcinoma. Primary thymic carcinoma is a rare neoplasm originating from the thymic epithelial cells. Clinical behavior of the thymic carcinoma is much different from it`s benign counterpart and several pathologic variants were reported.

• Korean Journal of Remote Sensing
• /
• v.18 no.5
• /
• pp.291-297
• /
• 2002

Optimal allocation of viewers on a terrain in such a wav that the hidden area would be minimized has many practical applications. However, it is impossible in practical sense to evaluate all the possible allocations. In this paper, we propose an optimal allocation of viewers based on genetic algorithm that enables probabilistic search of huge solution space. An experiment for one and three viewers was performed. The algorithm converges to good solutions. Especially, in one viewer case, the algorithm found the best solution.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.139-144
• /
• 1995

The main purpose of igniter is sure ignition of main propellant at desired ignition delay times. Since ignition mechanism of solid rocket propellant involves so many complicated physical and chemical phenomena, it is almost impossible to predict ignition behavior with pure analytical means. In this study, one dimensional and unsteady ignition transient phenomena in solid rocket was analyzed by finite volume method. In analysis, assumption was made that ignition occurs when propellant surface temperature reaches to it's auto-ignition temperature.

• YAKHAK HOEJI
• /
• v.13 no.2_3
• /
• pp.57-61
• /
• 1969

From the principle of CHN-Corder analysis, it is obvious that seperation of chlorine and bromine in a sample is nearly impossible. In order to analyze, chlorine, bromine, and sulfur seperately in a sample which is a single organic compound or a mixture of organic drugs, combination of flask combustion method and CHN-Corder was successfully attempted.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.121-130
• /
• 2021

In this paper, we propose a method to improve the positioning accuracy of TOA based indoor positioning system in NLOS environments. TOA based indoor positioning systems have been studied mostly considering LOS environments. However, it is almost impossible to maintain the LOS environments due to obstacles such as people, furniture, walls, and so on. The proposed method in this study compensates the range error caused by the NLOS environments. We confirmed that positioning accuracy of a proposed method is improved than conventional algorithms through simulation and field test.