• 구강회복응용과학지
• /
• 제23권1호
• /
• pp.21-30
• /
• 2007

Despite of the successful clinical performance of implants, it is still lacking of the knowledge of changes in implant occlusion. The purpose of this study was to evaluate the changes of infraocclusal contact after clinical occlusal function of implant. Twenty patients(38 implants) were recalled during 10 months after placement of implant prosthesis. Occlusion changes were investigated at placement, placement 1 months, 4 months and 10 months serially with silicone bite material and T-Scan II sensor. Bony changes were also evaluated with periapical radiographs. The changes of silicone thickness and T-Scan II sensored areas were statistically analyzed with repeated measured ANOVA and the Scheffe's post-hoc test at the 95% significance level. The following results have been made based on this study: 1. Alveolar bone loss was within 0.20mm and it was generally concluded within physiologic level. 2. There were no statistically significant differences in the thickness changes of silicone material at 1 month and 4 months of occlusal function. However, there was statistically significant difference at 10 months of occlusal function (p<0.05). 3. There was no statistically significant difference in changes of occlusal contact area in T-Scan II at 1 month and 4 months of occlusal function, but there was statistically significant difference at 10 months of occlusal function (p<0.05). Conclusively, as time goes by, implant occlusion to be formed infraocclusion was to be far close and increased occlusal contact. However, it was not observed destructive bone resorption in periapical radiographs and any other side effects.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.633-643
• /
• 2007

Statement of problem: Recently there are on an increasing trend of using implants-especially in edentulous mandible of severly alveolar bone recessed. Purpose: The aim of this study was to analyze the displacement and stress distribution of various mandibular implant-retained overdenture models supported by two implants in interforaminal region under the occlusion scheme load. Material and method: FEA models were made by the 3D scanning of the edentulous mandibular dentiform. The three models were named as Model M1, M2, and M3 accord ing to the position of implants: M1, Lt. incisor area, M2, Canine area, and M3, 1st Premolar area. Inter-implant angulation model was named as M4. Conventional complete denture was named M5 and used as a control group. Ball implant and Gold matrice were used as a retentive anchors. The occlusion type loads were applied horizontally over each tooth. Results: 1. In mandibular implant retained overdenture Canine Protected Occlusion type load resulted in higher levels of stress to the implants and female matrices than other types of loads. 2. The overdenture model M1, with implants in lateral incisor areas resulted in lower stress concentration to the implants and female matrices than other models. 3. In mandibular implant retained overdenture the stresses of the implant and female matrice were lower in mesially inclined implant than these of parallel installed implant. Conclusion: Lateral incisor areas could be the best site for the implants in mandibular implant-retained overdenture. The mandibular implant retained overdenture models mentioned above showed to the lowest stress to the implants and female matrices.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.52-56
• /
• 2012

Conventional implant protocols required a load-free healing period of three to six months between placement and functional loading of the implants. Many efforts have been made to minimize the duration of treatment time. Several literatures have documented immediate function with provisional or definitive prosthesis within a week of the placement in response to these demands. In addition, immediate implant placement has advantages such as shortened treatment time and preservation of soft tissue architectures. This article presents immediate implant placement into fresh extraction sockets followed by functional immediate loading with provisional prosthesis on canine and premolars for a patient having canine protected occlusion.

• Journal of Periodontal and Implant Science
• /
• 제46권6호
• /
• pp.396-404
• /
• 2016

Purpose: The aim of this retrospective study was to determine the association between dental implants in the posterior region and traumatic occlusion in the adjacent premolars, using data collected during from 2002 to 2015. Methods: Traumatic occlusion in the adjacent premolars was assessed by examining clinical parameters (bleeding on probing, probing pocket depth, fremitus, and tooth mobility) and radiographic parameters (loss of supporting bone and widening of the periodontal ligament space) over a mean follow-up of 5 years. Clinical factors (gender, age, implant type, maxillary or mandibular position, opposing teeth, and duration of functional loading) were evaluated statistically in order to characterize the relationship between implants in the posterior region and traumatic occlusion in the adjacent premolars. Results: The study inclusion criteria were met by 283 patients, who had received 347 implants in the posterior region. The incidence of traumatic occlusion in the adjacent premolars was significantly higher for splinted implants (P=0.004), implants in the maxillary region (P<0.001), and when implants were present in the opposing teeth (P<0.001). The other clinical factors of gender, age, and duration of functional loading were not significantly associated with traumatic occlusion. Conclusions: This study found that the risk of traumatic occlusion in the adjacent premolars increased when splinted implants were placed in the maxillary molar region and when the teeth opposing an implant also contained implants.

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.419-426
• /
• 2017

임플란트는 자각증상을 느끼기 어렵고, 완충역이 없으므로 응력 분포를 고려하지 않는 경우 기계적 실패를 야기할 수 있다. 다수의 상악 전치부 임플란트 수복의 경우 하악의 기능 운동 시 유도를 담당함으로써, 임플란트에 가해지는 측방력의 분산에 중요한 역할을 하므로, 적절한 가이드의 설정이 중요하다. T-scan system을 이용하는 방법은 교합지나 shimstock을 사용하는 기존의 정성적인 방법에 비해, 시간에 따른 교합의 변화와 기능 운동시 접촉되는 치아의 기여정도 및 육안으로 관찰하기 어려운 후방 구치나 반대편 치아의 접촉을 파악하는 등 동적인 교합평가에 유리하다. 본 논문에서는 다수의 상악 임플란트 보철물에 조화로운 전방유도를 부여하기 위하여 T-scan 분석을 활용하는 방법에 관하여 증례를 통해 살펴보고자 한다.

• 대한치과의사협회지
• /
• 제54권7호
• /
• pp.513-520
• /
• 2016

In crossed occlusion, displacement of removable partial denture is likely to occur during function due to different characteristics of abutment and supporting tissue. It increases discomfort to the patient. In addition, adverse effect on the residual ridge and abutment can induce an unfavorable prognosis of the denture. In this case, a small number of implants can be placed in strategic locations. Attachment can be added for additional support and retention of removable partial denture assisted by implants. This article describes the rehabilitation of a crossed occlusion patient using implant-assisted removable partial denture with Locator$^{(R)}$ attachment. After 24 months, the patient was satisfied with the aesthetic and function of the prosthesis that is maintained stable.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.1-9
• /
• 2011

PURPOSE. This study investigated the strain of implants using a chewing simulator with strain gauges in mandibular implant-supported fixed prostheses under various dynamic loads. MATERIALS AND METHODS. Three implant-supported 5-unit fixed prostheses were fabricated with three different occlusion types (Group I: Canine protected occlusion, Group II: Unilaterally balanced occlusion, Group III: Bilaterally balanced occlusion). Two strain gauges were attached to each implant abutment. The programmed dynamic loads (0 - 300 N) were applied using a chewing simulator (MTS 858 Mini Bionix II systems, MTS systems corp., Minn, USA) and the strains were monitored. The statistical analyses were performed using the paired t-test and the ANOVA. RESULTS. The mean strain values (MSV) for the working sides were 151.83 ${\mu}{\varepsilon}$, 176.23 ${\mu}{\varepsilon}$, and 131.07 ${\mu}{\varepsilon}$ for Group I, Group II, and Group III, respectively. There was a significant difference between Group II and Group III (P < .05). Also, the MSV for non-working side were 58.29 ${\mu}{\varepsilon}$, 72.64 ${\mu}{\varepsilon}$, and 98.93 ${\mu}{\varepsilon}$ for Group I, Group II, and Group III, respectively. One was significantly different from the others with a 95% confidence interval (P < .05). CONCLUSION. The MSV for the working side of Groups I and II were significantly different from that for the non-working side (Group I: t = 7.58, Group II: t = 6.25). The MSV for the working side of Group II showed significantly larger than that of Group III (P < .01). Lastly, the MSV for the non-working side of Group III showed significantly larger than those of Group I or Group II (P < .01).

• 대한두개안면성형외과학회지
• /
• 제17권1호
• /
• pp.20-24
• /
• 2016

Background: Midface concavity is a relatively common facial feature in East Asian populations. Paranasal augmentation is becoming an increasingly popular procedure for patients with mild concavity and normal occlusion. In this study, we evaluate clinical outcomes following a series of paranasal augmentation. Methods: A retrospective review was performed for patients with Class I occlusion who had undergone bilateral paranasal augmentation using custom-made silicone implants, between October 2005 and September 2013. Patient charts were reviewed for demographic information, concomitant operations, and postoperative complications. Preoperative and postoperative (1-month) photographs were used to evaluate operative outcome. Results: The review identified a total of 93 patients meeting study criteria. Overall, aesthetic outcomes were satisfactory. Five-millimeter thick silicone implant was used in 81 cases, and the mean augmentation was 4.26 mm for this thickness. Among the 93 patients, 2 patients required immediate implant removal due to discomfort. An additional 3 patients experienced implant migration without any extrusion. Nine patients complained of transient paresthesia, which had resolved by 2 weeks. There were no cases of hematoma or infection. All patients reported improvement in their lateral profile and were pleased at follow-up. Complications that arose postoperatively included 9 cases of numbness in the upper lip and 3 cases of implant migration. All cases yielded satisfactory results without persisting complications. Sensations were fully restored postoperatively after 1 to 2 weeks. Conclusion: Paranasal augmentation with custom-made silicone implants is a simple, safe, and inexpensive method that can readily improve the lateral profile of a patient with normal occlusion. When combined with other aesthetic procedures, paranasal augmentation can synergistically improve outcome and lead to greater patient satisfaction.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.330-337
• /
• 2018

무치악 환자에게 임플란트 지지 고정성 보철수복 치료는 그 효용성이 검증되었으나, 복잡한 치료과정이 수반된다. 반면, 현대 치의학에서 디지털 기술력은 나날이 발전하여 현재 무치악 환자의 임플란트 수복치료까지 그 범위를 확장하였다. 본 증례에서는 66세 하악 무치악 환자의 임플란트 고정성 보철 수복에 대하여 진단부터 수술, 임시수복물 및 최종수복물의 디자인과 제작까지 디지털 시스템을 모든 단계에 이용하였다. 수술 전 진단단계에서 구강스캐너를 이용한 점막스캔과 환자의 안정적인 기존 총의치 교합을 토대로 임시수복물을 디자인하였다. 수술가이드를 이용하여 무절개 임플란트 식립 후에 사전제작한 임시수복물을 임플란트와 연결하여 즉시 임시수복물로써 사용하였다. 디지털 기술을 이용하여 안정적인 교합이 형성된 임시수복물의 수직고경과 중심위를 이전하여 최종수복물을 디자인 및 제작 하였다. 디지털 기술을 활용하여 환자의 수직고경과 교합을 보전하는 방법을 사용함으로써 무치악환자에서 복잡할 수 있는 임플란트 치료의 간단한 프로토콜을 정립하였기에 보고하는 바이다.

• 구강회복응용과학지
• /
• 제32권4호
• /
• pp.314-321
• /
• 2016

기존의 후방 연장 국소의치는 재이장을 위한 잦은 내원의 필요성, 클래스프에 의한 지대치로의 과도한 응력, 클래스프의 노출에 의한 비심미성 등의 단점이 있다. 이에 임플란트를 이용하여 부가적인 지지나 유지를 얻는 Implant-assisted RPD(IARPD)는 국소의치의 안정성과 심미성, 그리고 저작 효율 증진에 도움을 줄 수 있다. 또한 의치의 교합면을 지르코니아로 교체한다면 인공치 마모로 인한 대합치의 정출 및 교합평면의 부조화를 예방할 수 있을 것이다. 본 증례는 엇갈린 교합을 가진 상하악 부분 무치악 환자에서 임플란트 고정성 보철물과 임플란트 유지 국소의치를 제작하여 전악 재건 시행한 증례로 주기적인 내원을 통해 기능적, 심미적으로 만족할만한 결과를 얻었기에 보고하고자 한다.