• 제목/요약/키워드: impedance ratio

검색결과 566건 처리시간 0.034초

뇌졸중 후 복합부위통증증후군에서 부위별 위상각을 이용한 평가 (Application of Segmental Phase Angle for Assessment of Post-Stroke Complex Regional Pain Syndrome)

  • 박세흠;김우진;조근열;권준구
    • Clinical Pain
    • /
    • 제19권1호
    • /
    • pp.23-27
    • /
    • 2020
  • Our objective is to evaluate the applicability of segmental phase angle (PhA) via bioelectrical impedance analysis (BIA) for post-stroke complex regional pain syndrome (CRPS). Due to its noninvasiveness and convenience, various studies have used BIA in clinical conditions. We measured segmental PhA in 4 patients at the time of CRPS diagnosis and repeated 4 weeks after 2 weeks of steroid pulse therapy. In 3 cases, the affected-to-unaffected ratio of the upper limb PhA decreased at the time of diagnosis. In 2 cases with improvement of more than 5 points in the CRPS severity score (CSS), increased ratios were observed. In other 2 cases with improvement of less than 4 points in the CSS, no remarkable changes in the ratios were found. We suggest that the segmental PhA can be helpful in assessment of post-stroke CRPS and its recovery.

초등학교 아동의 비만 진단에 있어서 생체 전기저항 분석법의 의의 (The Clinical Significance of Bioelectrical Impedance Analysis for The Diagnosis of Obesity on Elementary Students)

  • 최기철;안영준;양은석;박상기;박종;문경래
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제1권1호
    • /
    • pp.107-114
    • /
    • 1998
  • 목 적: 소아 비만의 평가에 이용되는 측정방법들 간의 상관관계와 생체 전기저항 분석법의 유용성을 알아보고자 한다. 대상 및 방법: 1997년 5월부터 7월까지 광주시내 초등학교 남.여 학생 206명을 대상으로 하여 신장, 체중, 허리둘레, 둔부둘레, 피지두께를 계측한 후, 생체전기저항 법에 신체조성을 측정하여 각 측정방법들 간의 상관관계를 비교하였다. 피지 두께치로 계산한 체지방률과 생체전기저항 법으로 측정한 체지방률의 상관관계를 비교 분석하였다. 결 과: 1) 남아에서 비만 측정방법들 간의 상관 관계; 상완 배측부 피지두께는 체질량 지수(r=0.74)와 가장 높은 상관관계가 있었고, 다음으로 체지방률(r=0.59)과 높은 상관관계가 있었으며 체중, 뢸러지수, 체지방량 순서로 비교적 높은 상관 관계가 있었다. 허리/둔부의 둘레 비, 신장, 체지방체중과는 낮은 상관 관계가 있었다(p<0.001). 견갑골하부 피지두께는 체질량 지수(r=0.64)와 가장 높은 상관관계가 있었으며 뢸러 지수, 체중, 체지방률, 체지방량 순서로 비교적 높은 상관관계가 있었으나(p<0.001), 허리/둔부의 둘레비, 신장, 체지방체중 등과는 낮은 상관관계가 있었다(p<0.01). 생체전기저항법으로 측정한 체지방률은 체질량지수(r=0.62)와 가장 높은 상관관계가 있었으며 상완 배측부 피지두께, 뢸러 지수, 체지방량, 견갑골하부 피지 두께, 체중의 순서로 비교적 높은 상관관계가 있었다(p<0.001). 제지방체중, 신장과는 유의한 상관관계가 없었다. 2) 여아에서 비만 측정방법들 간의 상관관계; 상완 배측부 피지두께는 체질량 지수와 가장 높은 상관관계가 있었고(r=0.70), 다음으로 체중, 제지방체중, 신장, 체지방률 순서로 높은 상관 관계가 있었다(p<0.001). 그러나 뢸러 지수, 허리/둔부의 둘레 비, 체지방량과는 상대적으로 낮은 상관 관계가 있었다(p<0.05). 견갑골하부 피지두께는 체질량 지수, 체중, 제지방체중의 순서로 비교적 높은 상관관계가 있었으며(p<0.001), 뢸러 지수, 신장과는 낮은 상관관계가 있었다(p<0.01). 그러나 체지방률, 허리/둔부 둘레 비, 체지방량과는 유의한 상관관계가 없었다. 생체전기저항법으로 측정한 체지방률은 체질량지수, 뢸러지수, 상완 배측부 피지두께와의 순서로 비교적 높은 상관관계를 보였으며(p<0.001), 체지방량, 체중과는 상대적으로 낮은 상관 관계를 보였다. 그러나 견갑골 하부 피지두께, 신장, 제 지방체중, 허리/둔부의 둘레 비와는 유의한 상관 관계가 없었다. 3) 생체전기저항 법과 피하지방 두께치에 의한 체지방률; 피지두께로 계산한 체지방률과 생체 전기저항 법으로 측정한 체지방률은 유의한 상관 관계가 있었으며(p<0.01), 특히 여아보다 남아에서 더 높은 상관관계가 있었다. 결 론: 피지두께치 및 생체전기저항 법으로 측정한 체지방률을 소아의 비만 판정 및 추적 관찰에 유용하게 사용할 수 있다.

  • PDF

포크 형태의 개방형 스터브 및 SIR 구조를 이용한 이중대역 대역통과 여파기의 설계 (Design of a Dual Band-pass Filter Using Fork-type Open Stubs and SIR Structure)

  • 이태현
    • 한국ITS학회 논문지
    • /
    • 제22권1호
    • /
    • pp.252-264
    • /
    • 2023
  • 본 논문은 λg/2 개방형 SIR 구조와 전송선로와 대칭 및 비대칭 개방형 스터브를 가진 포크-형태의 구조를 일체화한 이중대역 대역통과 여파가 설계에 대해 제안을 한다. 이중대역 효과를 얻기 위해, 제안된 여파기는 SIR 구조를 이용했고, SIR 구조의 임피던스 비율을 조절한다. 그러므로 여파기의 고조파는 임피던스 비율의 조절을 통해 위치가 이동하게 되며 이는 이중대역 효과를 얻을 수 있다. 이중대역 특성을 얻기 위해 SIR 구조를 반으로 나눈 상태에서 SIR 구조 사이에 개방형 스터브를 삽입하여 이중대역 효과를 얻는다. 또한 포크 형태의 구조에서 개방형 대칭 스터브의 길이를 조절함으로써 두 번째 주파수 응답을 얻는다. 포크 형태에서 비대칭 개방형 스터브는 길이의 조절을 통해 최적의 대역폭을 얻는다. 그러므로 제안된 대역통과 여파기의 첫 번째 중심 주파수는 5.896 GHz이며 대역폭은 13.6 % 이다. 이때, 측정 결과는 0.13 dB 및 33.6 dB이다. 두 번째 중심 주파수는 5.906 GHz이며 대역폭은 13.6 % 이다. 이때, 측정 결과는 0.15 dB 및 19.8 dB이다. 그 이유는 임피던스 비율(Δ)이 1보다 높으면 고조파의 위치는 낮은 주파수 대역으로 이동하게 된다. 그러나 임피던스 비율(Δ)이 1보 낮아지게 된다면 고조파의 위치는 높은 주파수 대역으로 이동하게 될 것이다. 이러한 특징을 이용하여 설계된 여파기의 기능은 측정 결과에서 얻을 수 있다. 제안한 대역통과 여파기는 입출력의 결합구조와 비아 홀이 없기 때문에 결합손실과 비아 에너지 집중 손실이 없다. 그러므로 성능이 우수하여 시스템 집적화가 가능하며 교통통신 시스템에서 활용되는 DSRC (dedicated short-range communication) 시스템 응용이 가능할 것으로 기대된다.

가상 n형 폴리아닐린의 제조 및 전기화학적 특성평가 (Preparation of pseudo n-type Polyaniline and Evaluation of Electrochemical Properties)

  • 김래현;최선용;정건용
    • 멤브레인
    • /
    • 제13권3호
    • /
    • pp.162-173
    • /
    • 2003
  • 폴리아닐린(polyaniline, PANI)과 도판트인 camphorsulfonic acid(CSA), dodecyl benzene sulfonic acid(DBSA)와 의몰비 변화에 따라 가상 n형 PANI을 제조하였다. FT-IR측정으로부터 도핑유무를 확인하였고, indium thin oxide(ITO)에 코팅하여 제조한 전극에 대해, 순환전압전류법과 교류임피던스법을 이용하여 도판트의 영향을 조사하였다. FT-IR과 순환전압전류법으로부터, 제조된 전극이 양이온의 도핑-탈도핑이 일어나는 가상 n형의 특성을 가짐을 확인하였다. 순환전압전류법에서 산화-환원 피크전류값은 PANI/DBSA에 비하여 PANI/CSA가 약 5 배정도 더 큰 결과를 보였다. 교류임피던스법으로부터, 두 전극 모두 이상적인 Randles의 등가회로와 유사한 거동을 보였다. 전하이동저항은 PANI/CSA에서 $1.14~1.09 k{\Omega}$으로 거의 일정한 값을 보였고, PANI/DBSA는 DBSA 몰 비에 증가에 따라 $27.73{\sim}8.37K{\Omega}$으로 감소하여 나타났다. 이중층용량 또한 PANI/CSA는 $13.47{\sim}14.59 {\mu}F$으로 거의 일정하였으나, PANI/DBSA는 DBSA 몰 비 증가에 따라 $0.49{\sim}l.20 {\mu}F$으로 증가를 보였다. 결과적으로 PANI/CSA의 전기적 특성이 더 좋았으나, 도판트의 몰 비 증가에 따른 특성은 PANI/CSA 전극은 거의 일정하였고, PANI/DBSA 전극은 전기적 활성이 좋아짐을 알 수 있었다.

Analysis of Pull-in-Voltage and Figure-of-Merit of Capacitive MEMS Switch

  • Saha, Rajesh;Maity, Santanu;Devi, Ngasepam Monica;Bhunia, Chandan Tilak
    • Transactions on Electrical and Electronic Materials
    • /
    • 제17권3호
    • /
    • pp.129-133
    • /
    • 2016
  • Theoretical and graphical analysis of pull-in-voltage and figure of merit for a fixed-fixed capacitive Micro Electromechanical Systems (MEMS) switch is presented in this paper. MEMS switch consists of a thin electrode called bridge suspended over a central line and both ends of the bridge are fixed at the ground planes of a coplanar waveguide (CPW) structure. A thin layer of dielectric material is deposited between the bridge and centre conductor to avoid stiction and provide low impedance path between the electrodes. When an actuation voltage is applied between the electrodes, the metal bridge acquires pull in effect as it crosses one third of distance between them. In this study, we describe behavior of pull-in voltage and figure of merit (or capacitance ratio) of capacitive MEMS switch for five different dielectric materials. The effects of dielectric thicknesses are also considered to calculate the values of pull-in-voltage and capacitance ratio. This work shows that a reduced pull-in-voltage with increase in capacitance ratio can be achieved by using dielectric material of high dielectric constant above the central line of CPW.

유무기 TiO2-SiO2 혼성코팅에 미치는 전구체 배합비율의 영향 (Effect of Precursor Ratio on the Properties of Inorganic-Organic Hybrid TiO2-SiO2 Coating)

  • 김동규;맹완영
    • 한국재료학회지
    • /
    • 제26권5호
    • /
    • pp.271-280
    • /
    • 2016
  • When a single inorganic precursor is used for the synthesis of a sol-gel coating, there is a problem of cracking on the surface of coating layer. In order to solve this problem of surface cracking, we synthesized inorganic-organic coatings that have hybrid properties of inorganic and organic materials. Sols of various ratios (1:0.07, 0.2, 0.41, 0.82, 1.64, 3.26, 6.54, 13.2) of an inorganic precursor of Tetrabutylorthotitanate ($Ti(OBu)_4$, TBOT) and an organic precursor of ${\gamma}$-Methacryloxy propyltrimethoxysilane (MAPTS) were prepared and coated on stainless steels (SUS316L) by dip coating method. The binding structure and the physical properties of the synthesized coatings were analyzed by FT-IR, FE-SEM, FIB (Focused Ion Beam), and a nano-indenter. Dynamic polarization testing and EIS (electrical impedance spectroscopy) were carried out to evaluate the micro-defects and the corrosion properties of the coatings. The prepared coatings show hybrid properties of inorganic oxides and organic materials. Crack free coatings were prepared when the MAPTS ratio was above a critical value. As the MAPTS ratio increased, the thickness and the corrosion resistance increased, and the hardness decreased.

작은 디바이스를 위한 원형편파안테나 설계 (Design of Circular Polarization Antenna for Small Device)

  • 김승우;강춘호
    • 전자공학회논문지SC
    • /
    • 제49권3호
    • /
    • pp.47-52
    • /
    • 2012
  • 본 논문은 Ku대역에서 동작하는 레이더용 원형편파안테나에 대한 설계 및 실험에 관한 것으로 선형안테나를 이용하여 원형편파안테나를 만들기 위해 Post를 이용함으로 안테나의 구조적 크기를 줄일 수 있었다. 원형편파 안테나의 축비 Bandwidth을 넓히기 위해 3개의 Post을 사용하였으며, 축비 최적화를 위해 Post사이 거리와 길이를 적절하게 선정하여 설계하였다. 또한 축비 최적화를 위해 반응표면법을 이용하여 최적화를 하였으며, 구현된 안테나는 12.7%의 Impedance Bandwidth와 설계 대역 내에서 2dB 이하의 축비 특성 및 7.8dBi 이상의 이득을 확인할 수 있었다.

Characteristics of the magnetic flux-offset type FCL by switching component

  • Jung, Byung-Ik;Choi, Hyo-Sang
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제18권2호
    • /
    • pp.18-20
    • /
    • 2016
  • The study of superconducting fault current limiter (SFCL) is continuously being studied as a countermeasure for reducing fault-current in the power system. When the fault occurred in the power system, the fault-current was limited by the generated impedance of SFCLs. The operational characteristics of the flux-offset type SFCL according to turn ratios between the primary and the secondary winding of a reactor were compared in this study. We connected the secondary core to a superconductor and a SCR switch in series in the suggested structure. The fault current in the primary and the secondary winding of the reactor and the voltage of the superconductor on the secondary were measured and compared. The results showed that the fault current in the load line was the lowest and the voltage applied at both ends of the superconductor was also low when the secondary winding of the reactor had lower turn ratio than the primary. It was confirmed based on these results that the turn ratio of the secondary winding of the reactor must be designed to be lower than that of the primary winding to reduce the burden of the superconductor and to lower the fault current. Also, the suggested structure could increase the duration of the limited current by limiting the continuous current after the first half cycle from the fault with the fault current limiter.

Effect of freezing on electrical properties and quality of thawed chicken breast meat

  • Wei, Ran;Wang, Peng;Han, Minyi;Chen, Tianhao;Xu, Xinglian;Zhou, Guanghong
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권4호
    • /
    • pp.569-575
    • /
    • 2017
  • Objective: The objective of this research was to study the electrical properties and quality of frozen-thawed chicken breast meat and to investigate the relationship between these parameters at different times of frozen storage. Methods: Thawed samples of chicken breast muscles were evaluated after being kept in frozen storage at $-18^{\circ}C$ for different periods of time (1, 2, 3, 4, 5, 6, 7, and 8 months). Results: The results showed that water-holding capacity (WHC) and protein solubility decreased while thiobarbituric acid-reactive substances content increased with increasing storage time. The impedance module of samples decreased during 8-month frozen storage. Pearson correlation coefficients showed that the impedance change ratio (Q value) was significantly (p<0.05) related to pH, color, WHC, lipid oxidation and protein solubility, indicating a good relationship between the electrical properties and qualities of frozen-thawed chicken breast meat. Conclusion: Impedance measurement has a potential to assess the quality of frozen chicken meat combining with quality indices.

공진 모드에 따른 Bragg-Reflector Type FBAR 의 이론적 분석 (Theoretical Analysis of Bragg-Reflector Type FBAR with Resonance Mode)

  • 조문기;윤영섭
    • 대한전자공학회논문지SD
    • /
    • 제40권11호
    • /
    • pp.9-18
    • /
    • 2003
  • 본 논문에서는 λ/4 반사층으로 이루어진 체적 탄성파 공진기의 두 가지 유형을 등가회로를 이용하여 이론적으로 분석하고 두 유형의 차이점을 비교 논의하였다. λ/2 모드는 상, 하부전극이 공기와 접하는 이상적인 공진기와 λ/4 모드는 상부전극은 공기와 접하고 하부전극 아래는 완전히 막혀 있는 이상적인 공진기와 비교하여 반사층이 공진특성에 미치는 영향을 분석하였다. 압전층으로는 ZnO 를 전극층으로는 Al 을 기판층은 Si 을 사용하였다. Mason 등가회로를 ABCD 파라미터를 추출할 수 있는 단순화된 등가회로로 변환하여 입력임피던스를 구하였다. 반사층의 두께 변화에 의한 공진주파수의 변화와 반사층의 기계적 Q 에 따른 전기적 Q 의 변화를 통해 하부전극 바로 아래의 반사층의 변화률이 제일 큼을 알 수 있었다. 반사층의 탄성 임피던스비가 증가함에 따라 Q 의 포화에 필요한 반사층의 수가 감소하였고 동일한 반사층 조건에서 λ/2 모드의 전기적 Q 가 λ/4 모드의 전기적 Q 보다 다소 크다는 사실을 확인하였다. 전기기계결합계수는 반사층수에 독립적이었고 반사층의 탄성 임피던스비가 증가함에 따라 증가하였다. 두 모드 모두 전기기계결합계수는 반사층에 탄성파 에너지의 존재로 인하여 이상적인 공진기보다 낮고 동일한 반사층 조건에서 λ/2 모드가 λ/4 모드보다 큼을 확인하였다. Ladder 필터 특성에는 반사층수가 증가할수록 삽입손실은 감소하지만 대역폭에는 큰 변화가 없었고 반사층의 탄성임피던스비가 높을수록 동일한 반사층수에서 삽입손실은 감소하였고 대역폭은 넓어졌다. 분석한 모든 특성으로 닥 때 λ/2 모드가 λ/4 모드보다 다소 우수하였다.