• 제목/요약/키워드: impact resistant performance

검색결과 44건 처리시간 0.02초

Seismic response of current RC buildings in Kathmandu Valley

  • Chaulagain, Hemchandra;Rodrigues, Hugo;Spacone, Enrico;Varum, Humberto
    • Structural Engineering and Mechanics
    • /
    • 제53권4호
    • /
    • pp.791-818
    • /
    • 2015
  • RC buildings constitute the prevailing type of construction in earthquake-prone region like Kathmandu Valley. Most of these building constructions were based on conventional methods. In this context, the present paper studied the seismic behaviour of existing RC buildings in Kathmandu Valley. For this, four representative building structures with different design and construction, namely a building: (a) representing the non-engineered construction (RC1 and RC2) and (b) engineered construction (RC3 and RC4) has been selected for analysis. The dynamic properties of the case study building models are analyzed and the corresponding interaction with seismic action is studied by means of non-linear analyses. The structural response measures such as capacity curve, inter-storey drift and the effect of geometric non-linearities are evaluated for the two orthogonal directions. The effect of plan and vertical irregularity on the performance of the structures was studied by comparing the results of two engineered buildings. This was achieved through non-linear dynamic analysis with a synthetic earthquake subjected to X, Y and $45^{\circ}$ loading directions. The nature of the capacity curve represents the strong impact of the P-delta effect, leading to a reduction of the global lateral stiffness and reducing the strength of the structure. The non-engineered structures experience inter-storey drift demands higher than the engineered building models. Moreover, these buildings have very low lateral resistant, lesser the stiffness and limited ductility. Finally, a seismic safety assessment is performed based on the proposed drift limits. Result indicates that most of the existing buildings in Nepal exhibit inadequate seismic performance.

소형 풍력발전기 소음 저감을 위한 익형 설계 연구 (Design of Low Noise Airfoil for Use on Small Wind Turbines)

  • 김태형;이승민;김호건;이수갑
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 추계학술대회 논문집
    • /
    • pp.465-465
    • /
    • 2009
  • Wind power is one of the most reliable renewable energy sources and the installed wind turbine capacities are increasing radically every year. Although wind power has been favored by the public in general, the problem with the impact of wind turbine noise on people living in the vicinity of the turbines has been increased. Low noise wind turbine design is becoming more important as noise is spreading more adverse effect of wind turbine to public. This paper demonstrates the design of 10 kW class wind turbines, each of three blades, a rotor diameter 6.4m, a rated rotating speed 200 rpm and a rated wind speed 10 m/s. The optimized airfoil is dedicated for the 75% spanwise position because the dominant source of a wind turbine blade has been known as trailing edge noise from the outer 25% of the blade. Numerical computations are performed for incompressible flow and for Mach number at 0.145 and for Reynolds numbers at $1.02{\times}10^6$ with a lift performance, which is resistant to surface contamination and turbulence intensity. The objective in the low design process is to reduce noise emission, while sustaining high aerodynamic efficiency. Dominant broadband noise sources are predicted by semi-empirical formulas composed of the groundwork by Brooks et al. and Lowson associated with typical wind turbine operation conditions. During the airfoil redesign process, the aerodynamic performance is analyzed to minimize the wind turbine power loss. The results obtained from the design process show that the design method is capable of designing airfoils with reduced noise using a commercial 10 kW class wind turbine blade airfoil as a basis. The new optimized airfoil clearly indicates reduction of total SPL about 3 dB and higher aerodynamic performance.

  • PDF

Fracture behavior and pore structure of concrete with metakaolin

  • Akcay, Burcu;Sengul, Cengiz;Tasdemir, Mehmet ali
    • Advances in concrete construction
    • /
    • 제4권2호
    • /
    • pp.71-88
    • /
    • 2016
  • Metakaolin, a dehydroxylated product of the mineral kaolinite, is one of the most valuable admixtures for high-performance concrete applications, including constructing reinforced concrete bridges and impact- and fire-resistant structures. Concretes produced using metakaolin become more homogeneous and denser compared to normal-strength concrete. Yet, these changes cause a change of volume throughout hardening, and increase the brittleness of hardened concrete significantly. In order to examine how the use of metakaolin affects the fracture and mechanical behavior of high-performance concrete we produced concretes using a range of water to binder ratio (0.42, 0.35 and 0.28) at three different weight fractions of metakaolin replacement (8%, 16% and 24%). The results showed that the rigidity of concretes increased with using 8% and 16% metakaolin, while it decreased in all series with 24% of metakaolin replacement. Similar effect has also been observed for other mechanical properties. While the peak loads in load-displacement curves of concretes decreased significantly with increasing water to binder ratio, this effect have been found to be diminished by using metakaolin. Pore structure analysis through mercury intrusion porosimetry test showed that the addition of metakaolin decreased the critical pore size of paste phases of concrete, and increasing the amount of metakaolin reduced the total porosity for the specimens with low water to binder ratios in particular. To determine the optimal values of water to binder ratio and metakaolin content in producing high-strength and high-performance concrete we applied a multi-objective optimization, where several responses were simultaneously assessed to find the best solution for each parameter.

Field Performance of Resistant Potato Genotypes Transformed with the EFR Receptor from Arabidopsis thaliana in the Absence of Bacterial Wilt (Ralstonia solanacearum)

  • Dalla-Rizza, Marco;Schvartzman, Claudia;Murchio, Sara;Berrueta, Cecilia;Boschi, Federico;Menoni, Mariana;Lenzi, Alberto;Gimenez, Gustavo
    • The Plant Pathology Journal
    • /
    • 제38권3호
    • /
    • pp.239-247
    • /
    • 2022
  • Bacterial wilt caused by the pathogen Ralstonia solanacearum is a devastating disease of potato crops. Harmonizing immunity to pathogens and crop yield is a balance between productive, economic, and environmental interests. In this work, the agronomic performance of two events of potato cultivar INIA Iporá expressing the Arabidopsis thaliana EFR gene (Iporá EFR 3 and Iporá EFR 12) previously selected for their high resistance to bacterial wilt was evaluated under pathogen-free conditions. During two cultivation cycles, the evaluated phenotypic characteristics were emergence, beginning of flowering, vigor, growth, leaf morphology, yield, number and size of tubers, analyzed under biosecurity standards. The phenotypic characteristics evaluated did not show differences, except in the morphology of the leaf with a more globose appearance and a shortening of the rachis in the transformation events with respect to untransformed Iporá. The Iporá EFR 3 genotype showed a ~40% yield decrease in reference to untransformed Iporá in the two trials, while Iporá EFR 12 did not differ statistically from untransformed Iporá. Iporá EFR 12 shows performance stability in the absence of the pathogen, compared to the untransformed control, positioning it as an interesting candidate for regions where the presence of the pathogen is endemic and bacterial wilt has a high economic impact.

어선 부가물 별 자유 횡 동요 감쇠 및 저항성능에 관한 연구 (Study on the Free Roll Decay and Resistance Performances of Fishing Vessels by Varying Appendages)

  • 윤미진;서장훈;박동우;이찬재;김인태;남동
    • 해양환경안전학회지
    • /
    • 제29권6호
    • /
    • pp.688-696
    • /
    • 2023
  • 본 연구에서는 어선의 운동성능을 향상하기 위해 부착되는 부가물의 조합과 파라미터 변경에 따른 어선의 자유 횡 동요 감쇠와 저항 성능을 평가하였다. 성능 평가를 위해 전산유체역학(Computational Fluid Dynamics)을 이용한 수치해석을 수행하였으며, 주요 부가물인 빌지킬과 선저킬의 조합과 치수 변경에 따른 횡 동요 주기와 감쇠 계수의 변화를 확인하였다. 선저킬의 경우 길이가 변화함에 따른 횡 동요 감쇠 계수의 변화가 상대적으로 크지 않음을 확인하였다. 반면 빌지킬의 경우 길이와 각도의 증가에 따라서 횡 동요 감쇠 계수가 증가함을 확인하였다. 4가지 부가물 조합 조건과 나선의 저항 성능을 비교하였으며, 부가물에 의한 어선의 자세와 압력분포의 변화로 인해 저항이 증가함을 확인하였다. 본 연구 결과를 통해 부가물 크기와 배치가 어선의 운동 및 저항 성능에 미치는 영향을 확인할 수 있었으며, 어선 적용 시에 도움이 될 수 있을 것으로 기대한다.

이상자료가 연안 환경자료의 통계 척도에 미치는 영향 (Impact of Outliers on the Statistical Measures of the Environmental Monitoring Data in Busan Coastal Sea)

  • 조홍연;이기섭;안순모
    • Ocean and Polar Research
    • /
    • 제38권2호
    • /
    • pp.149-159
    • /
    • 2016
  • The statistical measures of the coastal environmental data are used in a variety of statistical inferences, hypothesis tests, and data-driven modeling. If the measures are biased, then the statistical estimations and models may also be biased and this potential for bias is great when data contain some outliers defined as extraordinary large or small data values. This study aims to suggest more robust statistical measures as alternatives to more commonly used measures and to assess the performance these robust measures through a quantitative evaluation of more typical measures, such as in terms of locations, spreads, and shapes, with regard to environmental monitoring data in the Busan coastal sea. The detection of outliers within the data was carried out on the basis of Rosner's test. About 5-10% of the nutrient data were found to contain outliers based on Rosner's test. After removal (zero-weighting) of the outliers in the data sets, the relative change ratios of the mean and standard deviation between before and after outlier-removal conditions revealed the figures 13 and 33%, respectively. The variation magnitudes of skewness and kurtosis are 1.36 and 8.11 in a decreasing trend, respectively. On the other hand, the change ratios for more robust measures regarding the mean and standard deviation are 3.7-10.5%, and the variation magnitudes of robust skewness and kurtosis are about only 2-4% of the magnitude of the non-robust measures. The robust measures can be regarded as outlier-resistant statistical measures based on the relatively small changes in the scenarios before and after outlier removal conditions.

Seismic vulnerability macrozonation map of SMRFs located in Tehran via reliability framework

  • Amini, Ali;Kia, Mehdi;Bayat, Mahmoud
    • Structural Engineering and Mechanics
    • /
    • 제78권3호
    • /
    • pp.351-368
    • /
    • 2021
  • This paper, by applying a reliability-based framework, develops seismic vulnerability macrozonation maps for Tehran, the capital and one of the most earthquake-vulnerable city of Iran. Seismic performance assessment of 3-, 4- and 5-story steel moment resisting frames (SMRFs), designed according to ASCE/SEI 41-17 and Iranian Code of Practice for Seismic Resistant Design of Buildings (2800 Standard), is investigated in terms of overall maximum inter-story drift ratio (MIDR) and unit repair cost ratio which is hereafter known as "damage ratio". To this end, Tehran city is first meshed into a network of 66 points to numerically locate low- to mid-rise SMRFs. Active faults around Tehran are next modeled explicitly. Two different combination of faults, based on available seismological data, are then developed to explore the impact of choosing a proper seismic scenario. In addition, soil effect is exclusively addressed. After building analytical models, reliability methods in combination with structure-specific probabilistic models are applied to predict demand and damage ratio of structures in a cost-effective paradigm. Due to capability of proposed methodology incorporating both aleatory and epistemic uncertainties explicitly, this framework which is centered on the regional demand and damage ratio estimation via structure-specific characteristics can efficiently pave the way for decision makers to find the most vulnerable area in a regional scale. This technical basis can also be adapted to any other structures which the demand and/or damage ratio prediction models are developed.

조직구성원의 정보기술 인적역량과 개인 업무만족 및 업무성과 간의 관계: 목표지향성 관점 (Relationships Among Employees' IT Personnel Competency, Personal Work Satisfaction, and Personal Work Performance: A Goal Orientation Perspective)

  • 허명숙;천면중
    • Asia pacific journal of information systems
    • /
    • 제21권4호
    • /
    • pp.63-104
    • /
    • 2011
  • The study examines the relationships among employee's goal orientation, IT personnel competency, personal effectiveness. The goal orientation includes learning goal orientation, performance approach goal orientation, and performance avoid goal orientation. Personal effectiveness consists of personal work satisfaction and personal work performance. In general, IT personnel competency refers to IT expert's skills, expertise, and knowledge required to perform IT activities in organizations. However, due to the advent of the internet and the generalization of IT, IT personnel competency turns out to be an important competency of technological experts as well as employees in organizations. While the competency of IT itself is important, the appropriate harmony between IT personnel's business capability and technological capability enhances the value of human resources and thus provides organizations with sustainable competitive advantages. The rapid pace of organization change places increased pressure on employees to continually update their skills and adapt their behavior to new organizational realities. This challenge raises a number of important questions concerning organizational behavior? Why do some employees display remarkable flexibility in their behavioral responses to changes in the organization, whereas others firmly resist change or experience great stress when faced with the need to alter behavior? Why do some employees continually strive to improve themselves over their life span, whereas others are content to forge through life using the same basic knowledge and skills? Why do some employees throw themselves enthusiastically into challenging tasks, whereas others avoid challenging tasks? The goal orientation proposed by organizational psychology provides at least a partial answer to these questions. Goal orientations refer to stable personally characteristics fostered by "self-theories" about the nature and development of attributes (such as intelligence, personality, abilities, and skills) people have. Self-theories are one's beliefs and goal orientations are achievement motivation revealed in seeking goals in accordance with one's beliefs. The goal orientations include learning goal orientation, performance approach goal orientation, and performance avoid goal orientation. Specifically, a learning goal orientation refers to a preference to develop the self by acquiring new skills, mastering new situations, and improving one's competence. A performance approach goal orientation refers to a preference to demonstrate and validate the adequacy of one's competence by seeking favorable judgments and avoiding negative judgments. A performance avoid goal orientation refers to a preference to avoid the disproving of one's competence and to avoid negative judgements about it, while focusing on performance. And the study also examines the moderating role of work career of employees to investigate the difference in the relationship between IT personnel competency and personal effectiveness. The study analyzes the collected data using PASW 18.0 and and PLS(Partial Least Square). The study also uses PLS bootstrapping algorithm (sample size: 500) to test research hypotheses. The result shows that the influences of both a learning goal orientation (${\beta}$ = 0.301, t = 3.822, P < 0.000) and a performance approach goal orientation (${\beta}$ = 0.224, t = 2.710, P < 0.01) on IT personnel competency are positively significant, while the influence of a performance avoid goal orientation(${\beta}$ = -0.142, t = 2.398, p < 0.05) on IT personnel competency is negatively significant. The result indicates that employees differ in their psychological and behavioral responses according to the goal orientation of employees. The result also shows that the impact of a IT personnel competency on both personal work satisfaction(${\beta}$ = 0.395, t = 4.897, P < 0.000) and personal work performance(${\beta}$ = 0.575, t = 12.800, P < 0.000) is positively significant. And the impact of personal work satisfaction(${\beta}$ = 0.148, t = 2.432, p < 0.05) on personal work performance is positively significant. Finally, the impacts of control variables (gender, age, type of industry, position, work career) on the relationships between IT personnel competency and personal effectiveness(personal work satisfaction work performance) are partly significant. In addition, the study uses PLS algorithm to find out a GoF(global criterion of goodness of fit) of the exploratory research model which includes a mediating variable, IT personnel competency. The result of analysis shows that the value of GoF is 0.45 above GoFlarge(0.36). Therefore, the research model turns out be good. In addition, the study performs a Sobel Test to find out the statistical significance of the mediating variable, IT personnel competency, which is already turned out to have the mediating effect in the research model using PLS. The result of a Sobel Test shows that the values of Z are all significant statistically (above 1.96 and below -1.96) and indicates that IT personnel competency plays a mediating role in the research model. At the present day, most employees are universally afraid of organizational changes and resistant to them in organizations in which the acceptance and learning of a new information technology or information system is particularly required. The problem is due' to increasing a feeling of uneasiness and uncertainty in improving past practices in accordance with new organizational changes. It is not always possible for employees with positive attitudes to perform their works suitable to organizational goals. Therefore, organizations need to identify what kinds of goal-oriented minds employees have, motivate them to do self-directed learning, and provide them with organizational environment to enhance positive aspects in their works. Thus, the study provides researchers and practitioners with a matter of primary interest in goal orientation and IT personnel competency, of which they have been unaware until very recently. Some academic and practical implications and limitations arisen in the course of the research, and suggestions for future research directions are also discussed.

싱글쉘 터널의 국내 적용에 대한 고찰 (Review on the application of single-shell tunnel in Korea)

  • 이상필;하희상;김동현
    • 한국터널지하공간학회 논문집
    • /
    • 제26권3호
    • /
    • pp.223-242
    • /
    • 2024
  • 2000년대 초 싱글쉘 터널이 한국에 소개된 이후, 광주우회도로를 시작으로 이 공법에 기반한 터널을 실제 프로젝트에 적용하려는 시도가 여러 번 있었으나 20여 년이 지난 지금까지도 도로나 철도와 같은 교통 터널의 본선에 채택된 적은 없다. 이는 터널 지보재가 영구지보재로서의 성능을 확보하지 못한다는 우려와 이와 관련된 기준이나 시방의 부재에 기인한 바가 크다. 이후 터널 전문가들의 많은 연구와 노력으로 고강도 및 최종 마감재로서의 숏크리트에 대한 기준과 내부식성 록볼트 등 영구지보재로서의 요구 조건이 설계 및 시공기준에 반영되었을 뿐만 아니라 장비, 시공기술, 작업자의 숙련도 등 시공 측면에서도 상당한 개선이 이루어져 왔다. 따라서, 이제는 기존 NATM 공법에 비해 환경 영향, 공기 및 공사비 측면에서 차별성이 있는 싱글쉘 터널공법의 국내 적용을 다시 고려해볼 때라고 생각된다. 다만, 싱글쉘 터널공법에 대한 부족한 설계 및 시공 경험, 불충분한 세부기준, 미흡한 시공상세 등에 대해서는 추가 연구 또는 시험시공 등을 통해서 보완이 필요하다. 본 논문에서는 싱글쉘 터널의 기본 개념부터 적용 및 연구현황, 기술발전 동향, 극복과 제 등에 대하여 고찰하였으며, 이를 통하여 싱글쉘 터널의 국내 적용성에 대하여 다시 한 번 적극적인 논의를 제안하고자 한다.

콘칼로리미터에 의한 외단열시스템의 방염 화재성능평가를 위한 연구 (A Study on Fire Performance Evaluation of EIFS on Anti-Flaming Finish by Cone Calorimeter Test)

  • 민세홍;선주석;김상철;최용묵;이석기
    • 한국화재소방학회논문지
    • /
    • 제26권3호
    • /
    • pp.106-111
    • /
    • 2012
  • 본 연구에서는, 건축 외장재로 많이 사용되고 있는 외단열시스템에 대해 방염 효과를 확인하기 위하여 콘칼로리미터 실험을 적용하였다. 실험 결과, 방염제의 도포 형태나 농도에 따라 초기 착화 시점을 지연하는데 효과가 있었으나, 외벽 수직화재 발생 시 외단열시스템의 방염처리는 화재에 영향을 미치지 못할 것이라는 것을 확인하였다. 또한, 외단열시스템에 사용하는 고밀도와 저밀도 스티로폼의 밀도차에 의한 화재에 미치는 영향은 차이가 없음을 확인하였다. 실험 시 외장재의 착화는 40초 전후로 발생하였으며, 방출열량도 100초 이내에 약 90 %가 발생하는 것으로 나타나 다른 외벽재료와 비교하여 초기 화재 확산이 매우 빠름을 알 수 있었다. 외단열시스템 외장재 화재로 인한 화재 확산을 방지하기 위해서는 법적으로 외단열시스템의 적용 시 건물의 용도별로 사용을 제한하거나 화염전파를 차단할 수 있는 수직외벽 구획 등의 대책이 시급히 요구된다.