• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.546-549
• /
• 2004

This paper describes the electrical characteristics of the polymer lightning arresters(L.As) used to protect distribution lines and power facilities from surge. For the relative comparison, the characteristics assessment was done for 2 states of L.As before and after water immersion treatment. The L.As for the comparative test were immersed with water of $95[^{\circ}C]$ considered a severe condition. After the immersion treatment, the assessment was carried out for material analyses in chemical structure(FTIR : fourier transform infrared spectrophotometer). Electrical performance measured insulation resistance measurement, leakage current measurement, critical operation voltage measurement etc.. In addition to, the results were compared with those for the L.As deteriorated in the field. Thus, the accelerative deterioration degree of polymer materials by immersion treatment was evaluated, by which the structural defects of the polymer L.As could be inferred.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.733-742
• /
• 2020

Taking the cylindrical float of the floating fence of a floating litter collection device as the research object, based on the shallow immersion characteristics of the cylindrical float, the Morison equation is modified, and the interaction between regular waves and the partially immersed horizontal cylindrical float is discussed in combination with scale model test. The results show that the modified Morison equation can accurately predict the wave force of the horizontal cylindrical float and reveal the influence of amplitude, immersion depth and period on the wave force of the cylindrical float. For partially immersed cylindrical floats, the wave force increases with the increase in wave height and decays with the increase in period. The positive value distribution of the wave force is larger than that of the negative direction, and the difference between the positive and negative directions is mainly affected by the immersion depth.

• Journal for History of Mathematics
• /
• v.20 no.1
• /
• pp.83-102
• /
• 2007

A math class in Korean university was taught in English for one semester and the students' improvement was measured in math content and English proficiency. Pre and post test in 9 week intervals showed that math content loaming in the immersion class was superior to the non-immersed class. Especially, the immersion class showed remarkable improvement in difficult problems among math content test problems. The immersion class improved in math-related English, but not in general English. It is discussed that the particular English expressions for math are hardly separable from the math content knowledge in English because understanding and using those expressions correctly means the students' understanding of math concept in English and thus the math concept itself.

• Journal of Technologic Dentistry
• /
• v.44 no.2
• /
• pp.60-66
• /
• 2022

Purpose: This study was conducted to investigate how one's motive to choose a major of study, career values, and satisfaction with the major affect immersion within the major. Methods: A self-administered questionnaire on choice of major and career values was completed by 224 students from March 2nd to March 15th of 2022. The collected data were analyzed using several metrics and tests with IBM SPSS Statistics 22.0 software: frequency and percentage, mean, standard deviation, t-test, ANOVA, correlation analysis, and linear regression. Results: The average scores of the motive to choose a major, career values, satisfaction with the major, and immersion in the major were 3.15, 3.91, 3.56, and 3.45, respectively. There were significant correlations between all four variables (p<0.05). Career values and satisfaction with the major positively influenced a student's immersion in that major; the explanatory power of the model was 77% (p<0.01). Conclusion: The department should offer education on career values to further increase the immersion of dental technician students within their chosen major.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.5-12
• /
• 2004

This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.5mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.243-248
• /
• 2008

Moisture damage of asphalt pavements can usually occur because of the loss of adhesion and cohesion between the asphalt binder and aggregate in the asphalt mixture due to presence of water. And this is one of the causes that is effect on the main distress of asphalt pavement. The objective of this study is to find out moisture damage characteristics of asphalt pavement. Effects of this study changes of the material properties and resistance characteristics of moisture damage on the asphalt mixtures under various temperatures and repeated immersion using indirect tensile test and modify Lottman test were evaluated during this study. The asphalt mixtures were produced using straight asphalt binder, SBS modified asphalt binder and aggregates. The material properties (resilient modulus, indirect tensile strength, failure energy and $DCSE_f$) of the asphalt mixtures were generally decreased with increasing to moisture damage caused by the number of repeated immersion. The decrease ratios of material properties by repeated immersion on SBS modified asphalt mixtures were lower than those of straight asphalt mixtures at all three test temperatures. As a conclusion, current criterion for evaluation moisture damage of asphalt mixtures is difficult for using distinction standard because of the limited evaluation criterion with one time immersion and single material property. Based on this research, to evaluate long term moisture damage on asphalt mixtures, material property tests of various kinds with repeated immersion test are considered.

• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.26-32
• /
• 2014

CCS(Carbon Capture and Storage) which is technic to capture and storage the carbon-dioxide is the method that reduces the carbon-dioxide from the industries to prevent earth from the global warming. In order to apply to the practical site, it is inevitable to investigate the possibility of damage in the pipe or components by carbon-dioxide. In this paper, the immersion test is performed to estimate the suitability of the rubber which is used to seal or connect the pipelines because the rubber has not been validated. Also, the immersion test is carried out in a certain condition(pre- and supercritical state).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.199-205
• /
• 2018

A geopolymer was produced from coal ash generated from an integrated gasification combined cycle (IGCC) plant and its water resistance was evaluated. For this purpose, the geopolymer specimens were immersed in water for 30 days to measure changes in microstructure and alkalinity of the immersion liquid. Particularly, the experiment was carried out with foaming status of the geopolymers and parameters of room temperature aging condition, and immersion time. The foamed geopolymer containing 0.1 wt% Si-sludge had pores with a diameter of 1 to 3 mm and exhibited excellent foamability. Also, the calcium-silicate-hydrate crystal phase appeared in the foamed geopolymer. In the geopolymer immersion experiment, the pH of the immersion liquid increased with time, because the un-reacted alkali activator remained was dissolved in the immersion liquid. From the pH change of the immersion liquid, it was found that geopolymer reaction in the foamed specimen was completed faster than the non-foamed specimen. Through this study, it was possible to successfully produce foamed and non-foamed geopolymers recycled from IGCC coal ash. Also the necessary data for the safe application of IGCC coal ash-based geopolymers to areas where water resistance is needed were established; for example, the process conditions for room temperature aging time, effect of foaming status, immersion time and so on.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.131-135
• /
• 2018

The purpose of the present study was to examine the effects of full immersion virtual reality (VR) on the autonomic nervous system. The study was conducted with 17 men in their 20s. The subjects were given full immersion VR content, and electrocardiogram (ECG) signals were measured for five minutes before and after the application of the full immersion VR. The autonomic nervous system was evaluated by analyzing the LF, HF, TP, and LF/HF ratio of the ECG signal. The obtained data was analyzed by conducting a paired sample t-test. After applying full immersion VR, the subjects' HF and TP decreased significantly, while their LF/HF ratio increased significantly. According to the results of this study, Full immersion VR provided stress to the autonomic nervous system, but the changes were within the normal range of healthy adults. Therefore, full immersion VR can be safely applied to healthy adults.