• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• 한국멀티미디어학회논문지
• /
• 제6권5호
• /
• pp.896-908
• /
• 2003

3D 가상환경에서의 상호작용기법은 가상공간 사용자의 몰입감과 사실감에 결정적인 영향을 미치는 매우 중요한 요소이다. 특히 데스크탑환경의 전자매뉴얼과 같이 정교한 객체조작이 요구되는 분야에서는 효과적이고 자연스런 객체조작을 위한 상호작용기법이 절실히 요구되고 있다. 본 논문에서는 객체를 구성하는 장면 그래프를 사용자의 선택에 따라 내부적으로 분할, 생성된 선택 후보 리스트론 이용하여 객체의 세부 단위요소를 정확하게 선택하고, 이동 및 회전 등의 조작을 하며 선택을 해제할 수 있는 일련의 조작 기법을 제안한다. 여기엔 각 조작단계마다 다양한 시각피드백 기능을 지원함으로써 객체조작을 보다 효과적으로 수행할 수 있는 기능도 포함된다. 제안된 기법은 정교한 객체의 조작을 필요로 하는 분야의 3D 사용자 인터페이스 구축에 효과적으로 적용될 수 있을 것이다.

• 디지털콘텐츠학회 논문지
• /
• 제18권2호
• /
• pp.275-282
• /
• 2017

디지털 기술의 발전과 함께 영화콘텐츠도 다양하게 변화하고 있다. 웹과 모바일 등의 플랫폼들이 개발되면서 이에 맞는 영화콘텐츠들이 등장하였다. 그러나 최근 화두가 되고 있는 가상현실 기술과 디바이스의 발달에도 불구하고 아직 영화콘텐츠 분야의 연구는 미비하다. 본 연구는 HMD(Head Mounted Display) 기반의 가상현실영화 제작을 위하여 로토스코핑 기법 활용한 영화의 미학적 활용을 중심으로 연구를 진행하였다. 먼저 기존의 가상현실 영화 중 그래픽 정보를 활용하여 미학적 표현을 한 사례인 'Notes on Blindness'와 'Pearl' 사례에서 어떻게 가상현실 공간을 미학적으로 표현하였는지를 살펴보았다. 이를 통해 그래픽화된 공간이 가상현실의 관객에게 새로운 미학적 경험을 제공하는 것을 발견하였다. 또한 실사기반 영상에 로토스코핑 기법을 활용한 '웨이킹 라이프' 와 '스캐너 다클리' 사례를 통해 로토스코핑 기법의 판타지적 활용과 성공 사례를 분석하였다. 마지막으로 실사기반의 가상현실 영화에서 관객의 몰입과 욕망의 충족을 위해 '그네 타는 소녀' 작품에 로토스코핑 기법을 적용하여 미학적으로 활용하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제10권2호
• /
• pp.53-66
• /
• 2006

최근 몰입도가 높은 가시화 기법 중 하나인 3차원 입체영상에 관심이 높아지고 있다. 그러나 일반적인 2차원 영상과는 달리 3차원 입체 영상은 3차원의 기하정보가 존재해야만 영상 생성이 가능하다. 3차원 기하정보가 존재하지 않는 2차원 영상을 이용한 입체 영상 저작이 매우 어렵다. 따라서 본 논문에서는 영상 기반 모델링 기법을 이용한 한 장의 실사 영상으로부터 3차원 입체 영상 생성하기 위한 3차원 입체 영상 저작 시스템을 제안한다. 제안한 시스템은 Adobe Photoshop(R)의 Plug-in형태로 개발함으로써 범용성과 확장성을 고려하였고 몰입감이 높은 입체 영상의 시점을 결정하기 위한 대화식 3차원 입체 영상 미리 보기 기능을 제공한다.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.356-356
• /
• 2007

Plasma immersion ion beam deposition (PIIBD) technique is a cost-effective process for the deposition of diamond like carbon thin film, the possible solid lubricant on large surface and a complex shape. We used PIIB process for the preparation of DLC thin film on $Al_2O_3$ with deposition conditions of deposition temperature range $200^{\circ}C$, working gas pressure of 1.310-1Pa. DLC thin films were coated by $C_2H_2$ ion beam deposition on $Al_2O_3$ after the ion bombardment of SiH4 as the bonding layer. Energetic bombardment of $C_2H_2$ ions during the DLC deposition to ceramic materials generated mixed layers at the DLC-Si interface which enhanced the interface to be highly bonded. Wear test showed that the low coefficient of friction of around 0.05 with normal load 2.9N and proved the advantage of the low energy ion bombardment in PIIBD process which improved the tribological properties of DLC thin film coated alumina ceramic. Furthermore, PIIBD was recognized as a useful surface modification technique for the deposition of DLC thin film on the irregular shape components, such as molds, and for the improvement of wear and adhesion problems of the DLC thin film, high temperature solid lubricant.

• Corrosion Science and Technology
• /
• 제21권3호
• /
• pp.200-208
• /
• 2022

Aluminum alloy is used by adding various elements according to the needs of the industry. Aluminum alloys such as 5052 and 6061 are known to possess excellent corrosion resistance by adding Mg. Despite their excellent physical properties, corrosion can occur. To solve this problem, an anodization technique generally can improve corrosion resistance by forming an oxide structure with maximized hydrophobic properties through coatings. In this study, the anodizing technique was used to improve the hydrophobicity of aluminum 5052 and 6061 by creating porous nanostructures on top of the surface. An oxide film was formed by applying anodizing voltages of 20, 40, 60, 80, and 100 V to aluminum alloys followed by immersion in 0.1 M phosphoric acid for 30 minutes to expand oxide pores. Contact angle and corrosion characteristics were different according to the structure after anodization. For the 5052 aluminum, the corrosion potential was improved from -363 mV to -154 mV as the contact angle increased from 116° to 136°. For the 6061 aluminum, the corrosion potential improved from -399 mV to -124 mV when the contact angle increased from 116° to 134°.

• 한국자원식물학회지
• /
• 제36권6호
• /
• pp.562-570
• /
• 2023

The droplet-vitrification technique for cryopreservation has proven successful across a diverse range of germplasm, ensuring safe and effective long term preservation. In this study, we investigate an effective cryopreservation protocol using the droplet-vitrification technique for shoot tips of Freesia hybrida cultivars 'Sunny Gold' and 'Sweet Lemon'. To determine optimal conditions for Freesia cryopreservation, we employed a carefully selected standard procedure along with additional treatments and alternative solutions. For 'Sunny Gold', the highest regrowth rate of 24% was achieved when shoot tips underwent dehydration with PVS3 solution for 120 minutes before direct immersion in liquid nitrogen (LN) for 1 hour, coupled with a standard protocol involving a two-step preculture with 0.3 M - 0.5 M sucrose, loading with C4 for 40 minutes, and unloading with 0.8 M sucrose for 40 minutes. In the case of 'Sweet Lemon,' regrowth of cryopreserved shoot tips was observed with dehydration treatments, including PVS2 (A3) for 60 minutes and PVS3 (B1) for 60 minutes, as well as longer exposure. The results reflect the distinct sensitivity of shoot tips to chemical toxicity and osmotic stress in these two genotypes. This study provides valuable evidence to consistently enhance the effectiveness of cryopreservation methods for the long-term conservation of Freesia germplasm.

• 한국콘텐츠학회논문지
• /
• 제20권9호
• /
• pp.271-284
• /
• 2020

하프라이프 알릭스에 대한 시장의 호평과 VR장비 판매 증가는 수익모델의 부재로 미래가 불확실한 VR시장 활성화의 전환점이 될 수 있다. 이에 선행연구를 바탕으로 VR게임의 특성을 그래픽, 1인칭시스템, 인터페이스, 컨트롤러, 인터랙션 기술, 사운드, 스토리로 분류하고 분석하였다. 분석결과 7개 요소는 VR의 구성 요소 중 게임의 완성도를 의미하는 '상호작용'과 '가상이미지'에 해당하였으며 상호 연결되어 있어 이를 묶은 상위 개념인 '현존감'을 제안하였다. VR 구성요소로서 사용자의 감정을 나타내는 '몰입감'은 유저의 능력에 적절한 과제의 난이도를 부여하는 몰입이론으로 분석하였으며 연구 과정은 전문가 패널 15명에게 델파이 기법과 FGI를 실시하여 객관성 확보를 위해 노력하였다. 마지막으로 '현존감'과 '몰입감'은 비례하는 특성으로서 알릭스는 물론 앞으로 VR게임 분석에서도 계속 유효한 개념이 될 수 있으므로 두 단어를 합한 '프레즌스 이펙트'라는 개념적인 틀을 제안하였다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.33-42
• /
• 2005

This study was performed to investigate the surface properties and in vitro biocompatibility of electrochemically oxidized Ti-6Al-7Nb alloy by anodic spark discharge technique. Discs of Ti-6Al-7Nb alloy of 20 mm in diameter and 2 mm in thickness were polished sequentially from #300 to 1000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. Anodizing was performed using a regulated DC power supply. The applied voltages were given at 240, 280, 320, and 360 V and current density of $30mA/cm^2$. Hydrothermal treatment was conducted by high pressure steam at $300^{\circ}C$ for 2 hours using a autoclave. Samples were soaked in the Hanks' solution with pH 7.4 at $36.5^{\circ}C$ during 30 days. The results obtained were summarized as follows; 1. The oxide films were porous with pore size of $1{\sim}5{\mu}m$. The size of micropores increased with increasing the spark forming voltage. 2. The main crystal structure of the anodic oxide film was anatase type as analyzed with thin-film X-ray diffractometery. 3. Needle-like hydroxyapatite (HA) crystals were observed on anodic oxide films after hydrothermal treatment at $300^{\circ}C$ for 2 hours. The precipitation of HA crystals was accelerated with increasing the spark forming voltage. 4. The precipitation of the fine asperity-like HA crystals were observed after being immersed in Hanks' solution at $37^{\circ}C$. The precipitation of HA crystals was accelerated with increasing the spark forming voltage and the time of immersion in Hanks' solution. 5. The Ca/P ratio of the precipitated HA layer was equivalent to that of HA crystal as increasing the spark forming voltage and the time of immersion in Hanks' solution.