• 디지털융복합연구
• /
• 제14권11호
• /
• pp.495-500
• /
• 2016

2016년을 기점으로 VR 시장이 급속도로 성장하고 있으며, 현재 VR 시장에서 가장 중요한 이슈로 떠오르고 있는 것은 VR 콘텐츠이다. 사용자의 몰입감과 상호작용을 최대한 충족시킬 수 있는 제작 기법과 좀 더 다양한 VR 콘텐츠가 필요하기 때문이다. 본 연구는 VR 콘텐츠 중 VR 영상 콘텐츠를 중심으로 몰입감을 지속할 수 있게 하고 향상할 수 있는 시청각 유도의 구성요소들을 국내외 사례 분석을 통해 시청각 유도의 올바른 방향성을 찾아보았다. 그 결과 시청각 유도의 시각적 청각적 구성요소로는 촬영, 편집, 조명, 스티칭, 그래픽, 이펙트, 성우 내레이션, 더빙, 등장인물의 음성, 배경음악 및 효과음 등이 있었고, 다시 기술적 내용적 요소로는 촬영기법, 편집기법, 조명, 스티칭, 그래픽과 이펙트, 사운드 및 효과음, 미장센 중심의 연극적 연출, 등장인물의 대사 및 내레이션, 등장인물과 오브제의 움직임 등으로 나타났으며, 더불어 향후 VR 영상 콘텐츠는 몰입감을 향상할 수 있는 시청각적 구성요소들과 함께 기술적 내용적인 구성요소들이 필요하며 지속적인 연구가 병행되어야 할 것이다.

• Journal of Radiation Protection and Research
• /
• 제10권2호
• /
• pp.155-159
• /
• 1985

무한균질공기(無限均質空氣)에 방사성물질(放射性物質)이 균일(均一)하게 분포(分布)된 방사성운(放射性雲)에서 피폭선량(被曝線量)은 일반적(一般的)으로 단일(單一)에너지 점등방선원(點等方線源)커넬 방법(方法)에 의하여 계산(計算)하고 있다. 이 방법(方法)의 가장 큰 제한성(制限性)은 인체표면(人體表面)에서만의 선량(線量)을 개산(槪算)한다는 사실(事實)이다. 이와같은제한성(制限性)을 제거(除去)하기 위하여, 이 보고서(報告書)는 감마선방출대형방사성운(線放出大型放射性雲) 속에서 방사선량계산(放射線量計算)에 인체표면(人體表面)에 입사(入射)되는 산난광자(散亂光子)스펙트럼을 고려(考慮)한 다른 접근방법(接近方法)을 도입(導入)하였으며, 그 결과(結果)는 다른 연구자(硏究者)들의 결과(結果)와 잘 일치(一致)하였다. 여기에서 얻은 결과(結果)는 현재(現在) 연구(硏究)가 진행중(進行中)인 무한(無限) 또는 반무한균질공기방사선운(半無限均質空氣放射線雲)에서 MIRD팬텀내 흡수선량분포결정(吸收線量分布決定)의 입력자료(入力資料로서 이용(利用)될 것이다.

• 한국도로학회논문집
• /
• 제18권4호
• /
• pp.47-53
• /
• 2016

PURPOSES : The objective of this study was to evaluate the results of the dynamic immersion test (DIT) through digital image analysis (DIA). METHODS : The asphalt binder retained post DIT was inspected visually by more than three investigators. However, because visual observations can be subjective, depending on the inspector's skills and knowledge, DIA was also performed. The threshold value for the DIA was determined by a mesh analysis, in which the digital image to be analyzed is divided into very small meshes. In addition, the bitumen bond strength (BBS) test was also performed to the compare the visual results with the mechanical values. RESULTS AND CONCLUSIONS : Depending on the materials used, various methods can be used to predict the behavior of retained asphalt. However, the increasing ratio in the trend of retained asphalt shows different behaviors among the evaluation methods. In this study, the results of the visual observations were significantly different from those of the DIA, the mesh analysis, and the BBS tests. Thus, DIA is an appropriate method for evaluating the results of the DIT. However, in order to use this technique in the field, it is necessary to determine a more reasonable threshold value by performing DIA on various materials.

• 방사성폐기물학회지
• /
• 제20권3호
• /
• pp.297-306
• /
• 2022

The acoustic emission (AE) is proposed as a feasible method for the real-time monitoring of the structural damage evolution in concrete materials that are typically used in the storage of nuclear wastes. However, the characteristics of AE signals emitted from concrete structures subjected to various environmental conditions are poorly identified. Therefore, this study examines the AE characteristics of the concrete structures during uniaxial compression, where the storage temperature and immersion conditions of the concrete specimens varied from 15℃ to 75℃ and from completely dry to water-immersion, respectively. Compared with the dry specimens, the water-immersed specimens exhibited significantly reduced uniaxial compressive strengths by approximately 26%, total AE energy by approximately 90%, and max RA value by approximately 70%. As the treatment temperature increased, the strength and AE parameters, such as AE count, AE energy, and RA value, of the dry specimens increased; however, the temperature effect was only minimal for the immersed specimens. This study suggests that the AE technique can capture the mechanical damage evolution of concrete materials, but their AE characteristics can vary with respect to the storage conditions.

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.47-53
• /
• 2024

본 연구는 어포던스 개념을 적용하여 가상 환경에서의 제스처 인식 과정에서 자연스러운 동작을 유도함으로써 상호작용과 몰입감을 향상하기 위한 인터랙티브 기술 활용을 제안한다. 이를 위해 샘플링 및 정규화 과정을 포함한 선분 인식 알고리즘을 활용하여 실제 손동작과 유사한 제스처를 인식하는 기법을 제안한다. 이러한 선분 인식은 본 논문에서 설계한 <VR Spell> 게임에서 마법진을 그리는 동작에 적용되었다. 실험 방법으로는 4개의 선분 인식 동작에 대한 인식률을 검증하였다. 본 논문은 실시간 핸드 트래킹 기술을 가상 환경, 특히 VR 게임과 같은 실감 콘텐츠에 적용하여 사용자에게 더 높은 몰입감과 재미를 추구하는 VR 게임을 제안하고자 한다.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.31-41
• /
• 1998

Single fiber fragmentation technique was used to evaluate the change of interfacial properties by degradation of fiber tensile strength in the fiber reinforced composites. The influences of fiber tensile strength on the interfacial properties have been evaluated by the fragmentation specimens(weak fiber samples) of glass fiber/epoxy resin that was made using the pre-degraded glass fiber in distilled water at $80^{circ}C$ for specified periods. The effects of the immersion time on the interfacial properties in the distilled water at $80^{circ}C$ also have been evaluated by the fragmentation specimens(original fiber samples) of glass fiber/epoxy resin that was made using the received glass fiber. As the result, the tensile strength of glass fiber was decreased with the increasing of the treatment time in the distilled water at $80^{circ}C$ and the interfacial shear strength was independent of the change of the glass fiber strength in the single fiber fragmentation test. But in the durability test using the single fiber fragmentation specimen, interfacial shear strength decreased with the increasing of the immersion time in distilled water ar $80^{circ}C$. And it turned out that the evaluating of interfacial shear strength using original fiber tensile strength was valuable in the durability test for the water environment by the single fiber fragmentation technique.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.527-530
• /
• 2002

In the present study, immersion test using artificial seawater was performed to evaluate the resistance of mortar specimens with or without ground granulated blast-furnace slag (SG) and fly ash (FA). Another variable was the fineness levels of SG (4,450, 6,000 and 8,000 ㎠/g). From the results of the immersion test for 270 days of exposure, the excellent resistance to seawater attack for SG mortar mixtures, especially in a high fineness levels, was confirmed. However, the reductions in compressive strength of FA mortar specimens was similar to those of OPC mortar specimens irrespective of replacement of FA.. In order to understand the deterioration mechanism due to seawater attack, X-ray diffraction (XRD) analysis were also carried out. Some reactants such as ettringite, gypsum, brucite and Friedel's salt were possibly detected through XRD technique.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.308-318
• /
• 1988

본 연구에서는 가압된 액체를 가류실에 접선방향으로 도입하게 함으로써 선회운동에 의하여 미립화를 시키도록 스크류형의 선회분사 노즐을 설계제작하였다.

• 대한기계학회논문집
• /
• 제6권3호
• /
• pp.256-260
• /
• 1982

This paper presents the characteristics of fuel spray in a diesel engine. In this paper, in order to obtain spray droplet size in a diesel engine, water was injected into the cylinder at room temperature and pressure by injection system. Spray droplet size was measured by liquid immersion technique with a lubricant used as an immersion liquid for spray water from injection nozzle. In this experiment, single hole type throttle nozzle are used at same operating conditions, which included opening pressure of nozzle, fuel delivery, and injection speed. Sauter mean diameter decrease with the increase of injection pressure and decrease in injection nozzle diameter. The rate of spray penetration increased with increasing injection pressure and diameter of injection nozzle at the constant spray conditions.

• International Journal of Contents
• /
• 제16권3호
• /
• pp.18-32
• /
• 2020

The aim of this study was to perform a meta-analysis of the learning outcomes of immersive learning technologies in English language teaching (ELT). This study examined 12 articles, yielding a total of 20 effect sizes. The Comprehensive Meta-Analysis (CMA) program was employed for data analysis. The findings revealed that the overall effect size was 0.84, implying a large effect size. Additionally, the mean effect sizes of the dependent variables revealed a large effect size for both the cognitive and affective domains. Furthermore, the study analyzed the impact of moderator variables such as sample scale, technology type, tool type, work type, program type, duration (sessions), the degree of immersion, instructional technique, and augmented reality (AR) type. Among the moderators, the degree of immersion was found to be statistically significant. In conclusion, the study results suggested that immersive learning technologies had a positive impact on learning in ELT.