• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.771-778
• /
• 2019

기존 단일 조도센서를 이용한 조도검출 방식은 좁은 FOV (Field of View) 특성 상 측정 위치에 따라 검출 조도의 균일도가 저하된다. 다수개의 조도센서를 통해 평균 조도값을 검출하는 방법은 복잡도 증가 및 계산과정에서 오류가 증가하는 문제점을 가지고 있다. 본 논문에서는 넓은 FOV를 가지는 하나의 이미지센서를 기반으로 한 조도검출 방법을 제안하였으며, 제안된 방법은 기존 조도센서가 가지는 시스템 복잡도, 오류 증가 등의 문제점이 해결 가능하다. 실내 환경에서의 성능평가 결과는 색차조도계 (CL-200A)를 이용한 기준값 대비 조도센서가 1개인 경우 평균 12%, 조도센서가 5개인 경우 평균 10.7%, 이미지센서의 경우 평균 6.2% 차이가 발생하는 것을 확인하였으며, 이를 통해 이미지센서를 기반으로 한 제안된 검출방법은 균일성이 향상된 공간조도를 간단하고 정확하게 검출할 수 있음을 확인하였다.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.1-7
• /
• 2012

In this paper, we present a new lighting control method considering ambient light in addition to the required lighting illumination for efficient energy saving of a LED stand. We estimate accurate environmental illuminance using a cheap illuminance sensor by modeling measured- and actual-illuminance using quadratic polynomial approximation. The relation between PWM(Pulse Width Modulation) duty ratio and illuminance intensity is modeled by a linear model. Illumination of the LED stand is controlled by estimating the difference of required illumination and the estimated ambient illumination. The developed LED stand has reduced electric energy consumption compared with a conventional manually controlled LED stand with the same lighting source. In addition, human subject evaluation shows that the LED stand, which is applied the proposed method, is more satisfactory than conventional ones since the proposed automatic controlled illumination produce more accurately required lighting and it is convenient.

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.384-390
• /
• 2019

친환경 저에너지 중점의 건축설계의 중요성이 점점 커져가고 있다. 또 한편으로는 좀 더 미시적인 관점의 에너지 절약 설계 기법이 요구되고 있다. 이러한 분위기 속에서 에너지 시뮬레이션의 필요성이 점차 증가하고 있으며, 특히 BIM 기반의 에너지 시뮬레이션은 높은 효율성으로 인해 주목받고 있다. 하지만 BIM의 데이터는 아직까지는 미시적인 에너지와 관련된 파라메터가 적용되어 있지 않다. 따라서 본 연구는 조도 센서에 의한 조명 제어 시뮬레이션을 통해 센서 조명 파라메터의 생성 필요성에 대해서 연구하고자 한다. 연구는 BIM을 통해 생성된 데이터를 바탕으로 조도 센서를 설치하고 조도 시뮬레이션을 통해 센서등의 스케줄 데이터를 생성하였다. 그리고 이렇게 생성된 스케줄 데이터를 바탕으로 에너지 시뮬레이션을 실시하여 소비전력의 감소율을 확인하였다. 연구에 따르면 조명에 따른 열부하량과 소비전력량이 각각 20%이상 감소하는 것으로 나타났다. 따라서 센서 조명 파라메터는 미시적인 에너지 절약 설계를 위해서 BIM 데이터 내에 생성될 필요가 있다고 판단된다. 본 연구는 센서 조명 파라메터의 생성에 국한된 것이 아니라, 이와 같이 미시적인 변인들을 검토하고 BIM 데이터 내에 적용할 필요가 있음을 밝히기 위해 수행되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1027-1032
• /
• 1996

The auto-illumination controller for office, residence, and so on was studied. The system consists of parts of a power supply, a signal oscillator, a lamp controller and two kinds of sensor. The lamp controller has two thyristors triggered by the IR sensor(SCRI) and CdS sensor(SCR2) respectively, When the illuminance around this system is higher than operating value of its sensor, lamp is turned off automatically. Otherwise, the light of lamp gets dim by CdS sensor. In case IR sensor senses the body heat of people around itself, the illuminance of the lamp gets maximum. The illuminance of the lamp can be changed dimmly by control of the variable resistor (RV) connected with SCR2 in series. The turning - on time of the lamp can be also controlled using a variable resistor(Rt) connected with a signal oscillator in parallel. Changing resistance Rt changes the time constant(.tau.), which triggers the gate of SCR2. Though people left the surrounding of lamp, the lamp keeps light for a while.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.104-109
• /
• 2019

Damage caused by wild animals such as pheasants and magpies is a problem in rural areas. A bird repellent system based on sensing and repelling farm pest animals and birds is proposed herein. This system is equipped with a bird model part on a supporting platform and comprises a sound source generator, a system control user interface, and a sensor in the center. The sensor is composed of an illuminance sensor and a PIR sensor. The illuminance sensor distinguishes between day and night, whereas the PIR sensor detects birds or wild animals and outputs them from the sound generator. The entire system can be managed easily by the user interface and system control.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.114-123
• /
• 2013

In these days, most of the office buildings are being required to save energy for maintenance. lighting system constitutes 20% to 30% of the total annual electrical energy consumption in office buildings. As an energy saving strategy for lighting system, dimming control system based on illuminance sensors came into use. But the system is accompanied with many illuminance sensors to control lighting and needs a lot of initial investment. In this study, the prediction equation for indoor daylighting illuminance distribution is proposed through the review for conventional research results and field measurements. The proposed equation was verified by the comparison between predicted results and field measurement results. The developed prediction equation for daylighting can be used to control the indoor illuminance level with the limited sensor when dimming control system is operated.

• 한국인터넷방송통신학회논문지
• /
• 제14권3호
• /
• pp.119-124
• /
• 2014

본 논문은 절전제어를 위한 사용자 감성마진 적용 능동규칙시스템을 제안한다. 이는 공간의 조명 환경을 평가하여 사용자의 감성을 해치지 않는 범위 내에서 능동규칙을 사용하여 조도를 조절함으로써 절전을 유도하고자 하는 시스템의 일부이다. 이를 위하여, 조도 측정 및 분석 결과를 기반으로 세부적인 조도기준 범위와 사용자 감성마진 하한조도를 설정하고, 이러한 값들을 감성마진 적용 능동규칙 설계에 사용한다. 또한 이동 에이전트가 이주 대상 센서 노드들을 차례로 방문하여, 사용자 조건, 용도 및 필요에 따른 다양한 능동규칙을 통하여 센서 데이터를 수집 및 전송하며, 임의의 발생 사건들(센서 데이터 값 및 시간 등의 변화)에 상응하는 조치들을 직접 실행할 수 있는 이동에이전트를 이용한 능동규칙시스템을 설계 및 구현한다. 또한, 규칙베이스와 이동에이전트 센서 네트워크 미들웨어시스템과의 연동을 통하여 다양한 능동적 센서 네트워크 응용에의 적용 가능성을 보인다.

• KIEAE Journal
• /
• 제8권3호
• /
• pp.101-106
• /
• 2008

The use of daylighting has been increased recently due to energy and visual comfort. The aims of interior daylighting are to adequately illuminate visual tasks, to create an attractive visual environment, and to save electrical energy. Lightpipe can improve the distribution of light to interior spaces. This study aims to evaluate the comparative daylighting performance of lightpipe under different sky conditions with mock-up model, sized $6m{\times}6m{\times}4m$ ($w{\times}d{\times}h$). For the purpose, perpendicular lightpipe system was designed as 650 diameter, with an aspect ratio of 2. Totally 49 measuring points of and two of outdoor illuminance on the horizontal plane were monitored from 09:00 to 18:30 on April 29 and May 15 2008. Agilent data logger and photometric sensor were used. Light factor were used to analyse daylight performance under different sky condition. Under overcast sky condition and clear sky condition, the lightpipe system is suitable for KS recommendation level of illuminance.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• KIEAE Journal
• /
• 제9권5호
• /
• pp.105-113
• /
• 2009

Daylighting provides the opportunity for both energy savings and improved visual comfort. An accurate estimation of the amount of daylight entering a building is the key step for daylight designing. This research aims to assess comparative daylighting performance of four different configurations of fenestration in case of unilateral windows and their variation under clear and overcast sky conditions. The selected window openings in this study were single punched, double punched, multiple punched and clerestory, and the area was same for each type of window. The experiment was designed for an office space using 1/10 scale model. Daylighting performance was evaluated by measuring the illuminance on work-plane height using Agilent data logger and photometric sensor Li-Cor. Thecomputer program ECOTECT was also used to simulate the pattern of interior illuminance distribution. Clerestory window showed the best performance in term of both illuminance level and distribution in the experiment. Multiple punched window provided more uniform illuminance distribution than single punched window. Lowest daylighting performance in the experiment was shown by double punched window.