• 전기학회논문지P
• /
• 제60권1호
• /
• pp.32-36
• /
• 2011

In this study, authors have proposed the autonomous state estimation which has been composed with IEC61850, GPS time synchronization and objective model design concept. The proposed method is able to supervise/correct measurement and communication error from SCADA. The major advantages of the proposed autonomous state estimation are that it is possible to evaluate integrity of data measured and transferred from SCADA, to reduce human intervention and to expense national-size applications such as EMS (Energy Management System), WAMS (Wide Area Monitoring System) or WAPS (Wide Area Protection System). This study addresses the issues related to the operation of the smart grid and proposes a new automated approach to achieve this goal. Through applying the proposed system to IEEE 14-bus test electric system, we prove the possibility of the proposed idea.

• 대한기계학회논문집A
• /
• 제29권6호
• /
• pp.828-834
• /
• 2005

Recently, injection molded plastic optical products are widely used in many fields, because injection molding process has advantages of low cost and high productivity. However, there remains residual birefringence and residual stresses originated from flow history and differential cooling. The present study focused on developing a technique to measure the birefringence in optical plastic parts using R-G-B separation of white light. The main idea of an analysis comes from the fact that more information can be obtained from the distribution of retardation caused by different wavelengths. A complete system to give the quantitative values of retardation covering high order 2-D birefringence will be demonstrated. Further investigation is under way to improve the accuracy of the system using diodes as light sources.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.31-36
• /
• 2012

In order to improve the mechanical roperties of the Gangjin celadon $BaTiO_3$ was added into the raw materials of celadon matrix. Through SEM and XRD analysis the structural changes were observed and the hardness values were measured. We could confirm that the mechanical strength considerably increased in the $BaTiO_3$ added celadon through the measurement of hardness values. The increase of mechanical strength values in the celadon may result from the compositional change in the microstructure such as grain boundary area through EDAX analysis. We might suggest a fundamental idea to improve the mechanical intensity of the celadon.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.290-293
• /
• 2004

Recently, injection molded plastic optical products are widely used, because injection molding process has advantages of low cost and high productivity. However, there remains residual birefringence and residual stresses originated from flow history and differential cooling. The present study focused on developing a technique measuring birefringence in optical plastic parts using R-G-B separation of white light. The main idea of an analysis comes from the fact that more information can be obtained from the distribution of retardation caused by different wavelengths. A complete system to give the quantitative values of retardation covering high order 2-D birefringence will be demonstrated. Further investigation is under way to improve the accuracy of the system using diodes as light sources.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.51-61
• /
• 1995

A coast down test mothod has been used to determine the resistance forces on running vehicle due to the aerodynamic drag, rolling resistance and driveline resistance. Most of the tests, however, are based on the Velocity-Time measurements, which require a sophisticated velocity measuring device and contain much error by nature. In the present study a coast down test method based on Distance-Time measurements is introduced, which contains the original idea of Russian scientist Prof. Petrushov along with the suggestions for improvement of the accuracy.

• 한국분말재료학회지
• /
• 제2권1호
• /
• pp.53-62
• /
• 1995

TLP(Transient-Liquid-Phase) bonding of Fe-base MA956 ODS alloy was performed. As insert metal a commercially available Ni-base alloy(MBF50) and an MA956 alloy with additive elements of 7wt% Si and 1wt% B were used. To confirm the idea that a concurrent use of MA956 powder with Insert metals can enhance the homogenization of constituent elements and thereby reduce the thickness of joint interface, MA956 powder was also inserted In a form of sheet. SEM observation and EDS analysis revealed that Cr-rich phase was formed in the bonded interface in initial stage of isothermal solidification during the bonding process, irrespective of kind of insert metals. Measurement of hardeness in the region of bonded interface and EDS analysis showed that a complete homogenization of composition could not be obtained especially in case of MBF50. Joints using either BSi insert metals only or BSi insert together with MA956 powder interlayer showed, however, a remarkable improvement in a compositional homogenization, even though a rapid grain growth in the bonded interface could not be hindered.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.239-243
• /
• 2012

본 논문에서는 전기 저항식 수분 측정 방식을 선택한 토양수분센서를 제안하였다. 이 방식은 토양내의 수분량에 따라 저항의 변화가 생기는 것을 전기적인 신호로 변환하여 토양수분량과의 관계를 비교하여 수분량을 측정하는 방식으로 방법이 간단하며 저렴한 비용으로 간단하게 장치를 구현하였으며, 시리얼통신을 이용하여 여러 개의 센서를 하나의 네트워크에 묶어 사용하였다. 이 센서 네트워크를 사용하여 IMS(Internet Management System)에 적용하였으며, 센서 네트워크가 웹에서도 잘 작동함을 보였다.

• 대한가정학회지
• /
• 제30권1호
• /
• pp.67-86
• /
• 1992

The author distributed the questionaires which ask the idea of the purchase of children's clothes in order to help the emotinal development of children and to raise demostic economy. 89% of those who answered realized the necessity of home sewing. Because of the lack of sewing ability(66%), the author made comparatively easy patterns such as blouses for summer, skirts, short pants and one-piece dresses. To populrize these patterns, the aother used the measurements of body-measurement which were made by Korea Institute of Standard. The author studied the patterns and choice of patterns according to growing body. The author tested the clothes worn and visual evaluation for fitness of the patterns. The results are as follows: First; The author developed basic pattern 1 and 2 and applied to design A, B and C. Second: For every design, the author made patterns fit to the children. Third: According to age, the author curtailed or enlarged patterns. Lastly: The author tried to reduce living expenses through making children's clothes using the sewing machine and supress over-consumption and lead the people toward normal economic life.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.98-105
• /
• 1996

A method is proposed to evaluate the elastic-plastic fracture resistance curve only with load displacement records without the crack length measurement in CT specimen. This method is based on the idea that the effect of plastic deformation and the crack growth can be measured only by using a load-displacement record. If we know the reference-load curve representing the hardening of specimen, then the crack extension can be calculated by the elastic compliance determined from the load ratio. The results of this proposed method were compared to those of the elastic-plastic fracture resistance curve for the ASTM standard unloading compliance method. The experimental results for two kinds of ductile materials showed that the proposed method well simulates the material J-R curves. This method is currently applied for CT specimens. but it can be extended to the other specimen geometries.

• ETRI Journal
• /
• 제28권3호
• /
• pp.265-274
• /
• 2006

Recent advances in positioning and photogrammetry technologies have made it possible to build a mobile mapping system (MMS) that can obtain 3D coordinates of geographic objects from stereo images recorded from a moving vehicle. In this paper, we present a design and detailed implementation of an MMS called a 4S-Van. Furthermore, we present four issues that have made major contributions to the performance of an MMS: 1) CCD camera calibration, 2) GPS signal condition, 3) integrating a GPS, inertial navigation system (INS), distance measurement indicator (DMI), and CCD cameras, and 4) the orientation angle of CCD cameras. In the experimental results, the performance of an MMS was analyzed for each component, giving an idea of how to effectively design and integrate each component in developing an MMS to get a maximal accuracy of 3D coordinates.