• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• 천문학회보
• /
• 제38권2호
• /
• pp.34.1-34.1
• /
• 2013

Interstellar ices (e.g., $H_2O$, $CO_2$, and CO ices) are formed on the surface of dust grains in dense molecular clouds. In a near-infrared spectrum, we can observe deep absorption features particularly due to $H_2O$ ice at $3.05{\mu}m$ and $CO_2$ ice at $4.27{\mu}m$. These interstellar ices have many pieces of information on the interstellar environment. Among various ices, $CO_2$ ice is one of the most important ones as a probe of the interstellar environment. That is because $CO_2$ ice is a secondary product unlike $H_2O$ and CO ices which are primarily formed on dust grains. Past studies for $CO_2$ ice in nearby galaxies were performed only for the galactic center in a few galaxies. In order to utilize the information from $CO_2$ ice effectively, it is valuable to perform mapping observations of ices on a galactic scale. With AKARI, we obtain the spatially-resolved near-infrared ($2.5-5.0{\mu}m$) spectra for the central ~1 kpc region of the nearby starburst galaxy M 82. These spectra clearly show the absorption features due to interstellar $H_2O$ and $CO_2$ ices, and we created their column density maps. As a result, we find that the spatial distribution of $H_2O$ ice is significantly different from that of $CO_2$ ice; $H_2O$ ice is widely distributed, while $CO_2$ ice is concentrated near the galactic center. Our result for the first time reveals spatial variations in $CO_2/H_2O$ ice abundance ratio on a galactic scale, suggesting that the ice-forming interstellar environment changes within a galaxy. In this presentation, we discuss the cause of the variations in the ice abundance ratio.

• 농업과학연구
• /
• 제25권2호
• /
• pp.176-180
• /
• 1998

충남지역 농특산물인 밤 및 호도의 과육을 분말화하여 아이스크림 믹스의 원료로 1~5% 첨가하고 아이스크림을 제조한 후, over run, 제품의 조성분 및 관능검사를 실시한 결과는 다음과 같다. 1. Over run의 측정에 있어서는 밤 분말 첨가의 경우 35.75~38.81%로서 41.18%인 control구에 비하여 낮게 나타나고 호도 첨가구에 있어서는 36.31~40.38%로서 control구에 비하여 낮았다. 2. 제품의 화학적 조성은 밤 분말을 첨가한 아이스크림의 경우 무지고형분과 단백질이 31.05~31.73%, 4.48~4.78%로서 control구에 비하여 높았고 호도 첨가구에 있어서는 지방량이 12.21~21.38%, 단백질량이 4.63~5.27%로서 control구에 비하여 높은 함량을 나타내었다. 3. 관능검사 결과 밤 첨가 아이스크림은 향취와 맛에 있어서 control구에 비하여 우수하였고 호도 첨가구는 향취에 있어서 통계적인 유의성이 인정되는 (0.05%) 우수성을 나타내었다.

• 터널과지하공간
• /
• 제16권3호
• /
• pp.241-250
• /
• 2006

LNG지하저장 핵심기술 중 하나인 ice ring 형성을 열-수리 역학 해석을 통해 분석하였다. ice ring은 극저온물질의 누출에 대한 이차방벽 역할과 지하수의 저장공동 침투에 대한 일차방벽역할을 수행한다. 따라서 ice ring의 두께와 위치는 콘크리트와 PU foam 및 멤브레인으로 구성된 일차방호재의 무결성 유지에 있어서 핵심인자가 된다. 수치해석을 통해 이러한 ice ring의 위치와 두께를 추정하였으며 온도와 지하수위 결과를 계측치와 비교하였다. 수치해석결과는 PU foam 열전도도의 온도의존성과 지하수의 상변화를 고려한 경우 파일럿 공동에서 측정한 계측치와 잘 일치하였다. 본 논문에서 제시한 수치해석 기법은 실규모 저장시설의 설계에 있어서 ice ring 형성을 모델링하는 데에 바로 사용될 수 있을 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.208-215
• /
• 2011

A full-scale field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. The first Korean icebreaking research vessel 'ARAON', after her delivery in late 2009, had a sea ice field trial in the Arctic Sea during July-August, 2010. This paper describes the test procedures and data analysis on the icebreaking performance of the IBRV ARAON. The data gathered from the icebreaking performance test in the Chukchi Sea and the Beaufort Sea during the Arctic voyage of ARAON includes the speed and engine power of the ship as well as sea ice thickness and strength data. The air temperature, wind speed and heading of the ship were also measured during each sea ice trial. The ARAON was designed to break 1 m thick level ice with a flexural strength of 630kPa at a continuous speed of 3knots. She is registered as a KR POLAR 10 class ship. The principal dimensions of ARAON are 110 m, 19 m and 6.8 m in length, breadth and draft respectively. She is equipped with four 3,500kW diesel-electric main engines and two Azipod type propulsion motors. Four sea ice trials were carried out to understand the relationship between the engine power and the ship speed, given the Arctic ice condition. The analysis shows that the ARAON was able to operate at 1.5knots in a 2.5m thick medium ice floe condition with the engine power of 5MW, and the speed reached 3.1 knots at the same ice floe condition when the power increased to 6.6MW. She showed a good performance of speed in medium ice floe compared to the speed performance in level ice. More detailed analysis is summarized in this paper.

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.556-563
• /
• 2019

The ice keel gouge and seabed interaction is one of the major considerations in the design of an Arctic pipeline system. Ice keel and seabed interaction engineering models based on experimental data, which give an explicit equation for estimating the ice gouging depth, have been suggested. The suggested equations usually overestimate the ice keel gouging depth. In addition, various types of numerical analyses have been carried out to verify the suggested engineering model equations in comparison to the experimental data. However, most of numerical analysis results were also overestimated compared with the laboratory experimental data. In this study, a numerical analysis considering the contact condition and geostatic stress was carried out to predict the ice keel gouging depth and compared with the previous studies. Considering the previously mentioned conditions, more accurate results were produced compared with the laboratory experiment results and the error rate was reduced compared to previous numerical analysis studies.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.298-303
• /
• 2001

A fundamental study on the under water harvest-type ice storage system and its temperature characteristics in ice storage system was performed experimentally. The experiments were conducted by changing the inlet refrigerant temperature of an evaporator to analyzing the thermal fluid motion inside the ice storage tank. From the experimental results, the cold storage characteristics were investigated by measuring the axial and radial temperature variations inside the ice storage tank with respect to the inlet and outlet refrigerant temperatures of an evaporator. In case of the under water harvest-type ice storage system, thermal fluid. motion inside the ice storage tank was shown differently in comparison with that of other ice storage systems. During the cooling storage process, there was no supercooling phenomenon in the ice storage tank. These results show the characteristic of this system and the possibility of application to other fields.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권3호
• /
• pp.110-117
• /
• 2006

Ice adhesion or cohesion leads to the decrease of the performance of ice making system, especially to dynamic type ice thermal storage system (DISS) which mainly forms ice from the flow of an aqueous solution. The ice adhesion is influenced by various parameters associated with operating or geometric condition. In this study, the influence on an adhesion of ice to the characteristic of cooling surface and to composition of an aqueous solution was fundamentally observed by using batch type cooling device,. a beaker. Three patterns of solution in each beaker were cooled with brine. Moreover, the characteristic of cooling surface on each beaker was distinguished to coating materials. Stirring power as a degree of the ice adhesion was measured. The stirring power to cooling heat transfer rate in each beaker was compared. As a result, the lowest stirring power of 8.9 W with non-adhesion of ice, was shown in the case of the aqueous solution of EG(4) + PG(1.5) + 1,6HD(1.5). in PE coating beaker.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1019-1022
• /
• 2006

Satellite sea ice data from 1978 to the present reveal that the perennial ice (or ice that survives the summer) has been rapidly declining at almost 10% per decade. Warming due to increases in greenhouse gases in the atmosphere is now also being reflected in winter with drastic reductions in the maximum extent observed in 2005 and 2006. The retreat of the perennial ice also exposes more open water and has revealed an asymmetric distribution of chlorophyll a pigment concentration in the Arctic basin. Phytoplankton blooms are most dominant at high latitudes, partly on account of sea ice, but in the Arctic basin, it appears that pigment concentrations in the Eastern (Laptev Sea) Region are on the average three times higher than those in the Western (Beaufort Sea) Region. Such asymmetry suggests that despite favorable conditions provided by the melt of sea ice, there are other factors that affects the productivity of the region. The asymmetry is likely associated with much wider shelf areas in the East than in the West, with sea ice processes that inhibits the availability of nutrients near the surface in deep water regions, and river run-off that affects nutrient availability. The primary productivity in the pan-Arctic region have been estimated using the pigment concentrations and PAR derived from SeaWiFS data and the results show large seasonal as well as interannual variability during the 1998 to 2005 period. The data points towards increasing productivity for later years but with only 9 years of data it is too early to tell the overall effect of the sea ice retreat.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.414-420
• /
• 2013

Generation and measurement methods of EG/AD model ice, which is used in KIOST ice model basin are investigated for improvement of its properties. Temperature of seed water, air temperature in the freezing phase and the target air temperature in the tempering phase were changed in the cold room, and the properties of model ice was measured in this conditions. We also verified a conventional measuring method of flexural strength of model ice caused a little measuring error in cold room, so that we suggested a new measuring method that must be used higher supports than double the thickness of the model ice. In this study, we improved the generation and measurement technique of EG/AD model ice, and the developed procedure at cold room can be applied to the KIOST ice model basin.