Browse > Article
http://dx.doi.org/10.3744/SNAK.2013.50.6.414

An Experimental Study on Generation and Measurement Method of EG/AD Model Ice at Cold Room for Improvement of Its Properties  

Cho, Seong-Rak (Maritime Transportation Research Division, KIOST)
Jeong, Seong-Yeob (Maritime Transportation Research Division, KIOST)
Ha, Jung-Seok (Maritime Transportation Research Division, KIOST)
Kang, Kuk-Jin (Maritime Transportation Research Division, KIOST)
Publication Information
Journal of the Society of Naval Architects of Korea / v.50, no.6, 2013 , pp. 414-420 More about this Journal
Abstract
Generation and measurement methods of EG/AD model ice, which is used in KIOST ice model basin are investigated for improvement of its properties. Temperature of seed water, air temperature in the freezing phase and the target air temperature in the tempering phase were changed in the cold room, and the properties of model ice was measured in this conditions. We also verified a conventional measuring method of flexural strength of model ice caused a little measuring error in cold room, so that we suggested a new measuring method that must be used higher supports than double the thickness of the model ice. In this study, we improved the generation and measurement technique of EG/AD model ice, and the developed procedure at cold room can be applied to the KIOST ice model basin.
Keywords
Ice model basin; Model ice; Flexural strength;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Cho, S.R. Lee, C.J. & Jeong, S.Y., 2010a. An efficient EG/AD model ice for the MOERI ice tank. Proceedings of International Symposium Offshore and Polar Engineering Conference, Beijing China, 20-25 June 2010, pp.1183-1187.
2 Cho, S.R. Lee, C.J. & Jeong, S.Y., 2010b. A Study on the Initial Model Ice Generation and Ice Resistance Tests. Journal of Ships & Ocean Engineering, 49, pp.1-9.
3 Cho, S.R. Chun, E.J. Yoo, C.S. Jeong, S.Y. & Lee, C.J., 2011a. The Measuring Methodology of Friction Coefficient between Ice and Ship Hull. Journal of the Society of Naval Architects of Korea, 48(4), pp.363-367.   DOI   ScienceOn
4 Cho, S.R. Yoo, C.S. & Jeong, S.Y., 2011b. Development of Model Test Methodology of Pack Ice in Square Type Ice Tank. Journal of the Society of Naval Architects of Korea, 48(5), pp.390-395.   DOI   ScienceOn
5 International Towing Tank Conference(ITTC), 1996. Final Report and Recommendations to the 21st ITTC. Performance in Ice-Covered Waters Committee of the 21st ITTC. ITTC
6 International Towing Tank Conference(ITTC), 1999. Final Report and Recommendations to the 22nd ITTC. Specialist Committee of the 22nd ITTC.ITTC
7 Jones, S., 1987. Ice Tank Test Procedure at the Institute for Marine Dynamics. Report No. LM-AVR-20, : National Research Council of Canada.
8 Kim, J.H. Choi, K. Jeong, S.Y. Seo, Y.K. Cho, S.R. & Lee, C.J., 2008. An Experimental Study for the Mechanical Properties of Model Ice Grown in a Cold Room. Journal of the Korean Society of Ocean Engineers, 22(3), pp.64-70.   과학기술학회마을
9 Kim, J.H., 2011. A Study on the Material Properties of Compound Model Ice for Utilization in the Ice Model Basin. Ph.D., Busan: Korea Maritime University, Korea.
10 Lee, C.J. Cho, S.R. Lau, M. & Wang, J.Y., 2008. A Study on Improvement of Ice Model Test Procedure. Journal of the Society of Naval Architects of Korea, 45(5), 562-568.   과학기술학회마을   DOI   ScienceOn
11 MARC, 2000. Standard Ship Model Tests, Ice Conditions and Analysis Methods at Masa-Yards Arctic Research Center. MARC Report D-114. MARC
12 Timco, G.W., 1986. EG/AD/S : A New Type of Model Ice for Refrigerated Towing Tanks. Cold Regions Science and Technology, 12, pp.175-195.   DOI   ScienceOn