• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.198-203
• /
• 2010

KSLV-I, a.k.a. Naro is the 1st Korean satellite launch vehicle, which was launched at Naro space center by Korea Aerospace Research Institute (KARI) in AUG. 2009, and JUN. 2010. Although the missions of 1st and 2nd launch of KSLV-I - inject the space craft into the designated orbit - were not successful, safety of launch vehicle was accomplished through the cooperation with the Russian partner Khrunichev Space Research and Production Center (KhSC). Both parties co-developed the safety management program to ensure launch safety. In this paper, the analysis and contents of safety program are illustrated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.682-685
• /
• 2010

KSLV-I is the 1st Korean satellite launch vehicle, which was launched at Naro space center by Korea Aerospace Research Institute (KARI) in AUG. 2009, and JUN. 2010. Although the missions of 1st and 2nd launch of KSLV-I were not successful, safety of launch vehicle was accomplished through the cooperation with the Russian partner Khrunichev Space Research and Production Center (KhSC). Both parties co-developed the technical safety management program to ensure launch safety. In this paper, the analysis and contents of safety program are illustrated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.171-175
• /
• 2011

In this paper, I have developed a high-speed and high-resolution measuring device in order to check the performance of drycell. The system is developed for the drycell manufacturing plant. Measuring time is one of key factors to inference on the production speed. So the developed system is designed to generate the classified result up to 1200ea/min. In the other words, each product can be classified within 25ms. There have been many studies to estimate both state of charge as well as state of health, such as OCV (Open Circuit Voltage), SC (Short Circuit) and measuring impedance with frequency pulse. But those methods take a few second due to surface discharge. To overcome the phenomenon, I developed the method to engage the reverse current to two electrodes of battery. As a result, I could achieve to measure the indigenous capacity without the problem of surface discharge.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.431-432
• /
• 2008

HIT Solar Cell은 단결정 실리콘 웨이퍼가 초박막 amorphos 실리콘 층으로 싸여있는 구조이다. HIT Solar Cell에서 amorphos 실리콘의 두께와 도핑 농도는 태양전지의 효율을 결정하는 매우 중요한 요인이다. 본 논문에서는 높은 효율을 갖는 태양전지 설계를 위해 AFORS HET 프로그램을 이용하여 TCO_a-Si:H(p)_a-Si:H(i)_c-Si(n)_Al 구조를 설계했다. 후에 a-Si:H(p)의 두께와 a-Si:H(i) 의 두께를 가변하며 효율을 측정하였고, p-i-n 구조에서 n+ 층을 추가함에 따라 변하는 효율을 측정하였다. 최적화 한 결과 $V_{oc}$ = 693mV, $J_{sc}$ = 3891mA/$cm^{-2}$, FF = 8363%, $E_{ff}$ = 22.55% 의 고효율을 얻었다.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.95-100
• /
• 2024

Cyclic Delay Diversity (CDD) is a diversity scheme used in OFDM-based telecommunication systems, transforming spatial diversity into frequency diversity and thus avoiding intersymbol interference without entailing the receiver to be aware of the transmission strategy making the signal more reliable achieving full diversity gain in cooperative systems. Here the analyzation of the influence of CDD-SC scheme in Cognitive Radio Network (CRN) is done with the challenge of overcoming the complication called channel estimation along with overhead in CNR. More specifically, the closed-form expressions for outage probability and symbol error rate are divided under different frequencies among independent and identically distributed (i.i.d.) frequency selective fading channel model i.e., the signal is divided into different frequencies and transmitted among several narrow band channels of different characteristics. It is useful in the reduction of interference and crosstalk. The results reveal the diversity order of the proposed system to be mainly affected by the number of multipath components that are available in the CNR.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.330-335
• /
• 2018

A new approach for the fabrication of organic-organic conducting composite thin films using simultaneous co-vaporization vapor phase polymerization (SC-VPP) of two or more monomers that have different polymerization mechanisms (i.e., oxidation-coupling polymerization and radical polymerization) was reported for the first time. In this study, a PEDOT-PSMA composite thin film consisting of poly(3,4-ethylenedioxythiophene)(PEDOT) and poly(styrene-co-maleic anhydride)(PSMA) was prepared by SC-VPP process. The preparation of organic-organic conductive composite thin films was confirmed through FT-IR and $^1H-NMR$ analyses. The surface morphology analysis showed that the surface of PEDOT-PSMA thin film was rougher than that of PEDOT thin film. Therefore, PEDOT-PSMA exhibited lower electrical conductivity than that of PEDOT. But the conductivity can be improved by adding 2-ethyl-4-methyl imidazole as a weak base. The contact angle of PEDOT-PSMA was about $50^{\circ}$, as compared to $62^{\circ}$ for PEDOT. The demonstrated methodology for preparing an organic-organic conductive hybrid thin film is expected to be useful for adjusting intrinsic conductive polymer (ICP)'s surface properties such as mechanical, optical, and roughness properties.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.2
• /
• pp.97-106
• /
• 2001

Safety and serviceability of a planar steel frame are assessed. Attention is turned to the individual main steps in the assessment procedure, i.e., to the definition of loads, selection of transformation model, determination of the response of the structure to the loading, and to the definition of the limiting values (considering safely and serviceability of the structure). The potential of the method using direct Monte Carlo technique as a powerful tool is emphasized.

• Preventive Nutrition and Food Science
• /
• v.2 no.1
• /
• pp.61-65
• /
• 1997

Wild type nodulin 26(nod 26) cDNA(S262) and phodphorylation aite mutant(S262D) were constructed by a yeast expression system using pYES2 plasmids(pTES2-D262 and pTES2-S262D) were sc-reened by restriction mapping with BamHI of KpnI. S262 nod 26 contained a sreine residue at position 262 and S262D nod 26 contained the substitution mutation of serine to aspartic acid residue at position 262 were verified by automated floursent DNA sequencing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.91-98
• /
• 2009

This paper provides new exact-closed form expressions for average SER and average BER as well as outage probability for M-PSK signaling with selection combining over independent but non-identically distributed Rayleigh fading paths. The validity of these expressions is verified by the Monte-Carlo simulations. All of numerical results are in excellent agreement with simulation results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.6
• /
• pp.739-743
• /
• 2011

The aim of this paper was to estimate genetic parameters for body weight and five body measurements for an experimental population of Iranian Makooei sheep maintained at the Makooei Sheep Breeding Station at Makoo, Iran. To do this, yearling live weight (YW), and five body measurements, i.e., body length (BL), heart girth (HG), height at withers (HW), height at back (HB) and scrotal circumference (SC), were analyzed in a multi-trait animal model using the DXMUX program of DFREML software package. Heritability estimates were $0.22{\pm}0.08$, $0.11{\pm}0.06$, $0.21{\pm}0.07$, $0.17{\pm}0.06$, $0.17{\pm}0.06$ and $0.32{\pm}0.10$ for YW, BL, HG, HW, HB and SC, respectively. These estimates indicate that selection in Makooei sheep would generate moderate genetic progress in body weight and body measurements. Scrotal circumference, as an indicator of reproductive potential, exhibited the highest heritability. This trait, therefore, could successfully be used to increase productivity of males and, indirectly, female fertility. Genetic correlations between traits studied were all positive and ranged from 0.15 (YW/HB) to 0.99 (HW/HB). Phenotypic correlations were also positive and ranged from moderate (0.32, HW/SC) to high (0.94, HW/HB). Positive genetic and phenotypic correlations indicate that improvement in body measurements both at the genetic and phenotypic levels is expected through selection on body weight and vice versa.