• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.603-605
• /
• 1994

The Single-Phase induction motor is widely used in home appliances, especially refrigerator, air conditioner and washing machine. Recently many home appliances that use the motor require the speed control to get the various and convenient functions for the customers. Generally it is so hard to control the speed of the Single-Phase induction motor and to get the wide range of the speed variation. In this raper, the speed controller using P-I is designed for the Single-Phase induct ion Motor. The experimental results of the phase controller using P-I show the wide speed control of the Single-Phase induction motor and rebuff control to load change.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to determine the optimum operational condition in lime adding process in water treatment plant(WTP). The mixing time at dissolution tank and sedimentation time at saturator for maintaining optimal turbidity condition of lime supernatant were 60~75 minutes and 75~95 minutes, respectively. There was no difference according to $CO_2$ adding methods such as $CO_2$ saturated water or $CO_2$ gas. But, $CO_2$ saturated water could be convenience at WTP in terms of pH control and quantitative dosing. To minimize generation of calcium carbonate products, the short time interval between adding of lime and $CO_2$ is most important. The lime should be added below 32 mg/l for preventing pH rising and generation of calcium carbonate products at the heating condition.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.5
• /
• pp.414-420
• /
• 2001

A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$ $J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$ $J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$ $J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$ $N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$ $N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$ $O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.

• Applied Biological Chemistry
• /
• v.51 no.2
• /
• pp.119-123
• /
• 2008

3D-QSARs (3 dimensional quantitative structrue-activity relationships) on the inhibition activities of 3-substituted-5,5'-diphenylimidazolidine-2,4-dione derivatives (1-22) against FAAH (fatty acid amide hydrolase) were studied quantitatively using CoMFA (comparative molecular field analysis) and CoMSIA (comparative molecular similarity indice analysis) methods. The statistical results of the CoMFA 1A and CoMSIA 2F model are better predictability and fitness. And also, the designed X=I, Y=$N_{2}^{+}$-substituent (P1: $Pred.pI_{50}$=6.55), according to the contour maps with information of the two models, showed the most inhibition activity against FAAH.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.51-59
• /
• 1997

Two comparative poplar clones (I-214: Populus euramericana, Peace: P koreana x P. trichocarpa) were exposed to two $CO_2$ concentrations (350 or 2,000 ${\mu}L\;L^{-1}\;CO_2)$ for 21 days. When both poplar clones were compared at growth conditions, the net photosynthetic rate $(P_N)$ in $CO_2-enriched$ (2,000 ${\mu}L\;L^{-1}\;CO_2=C_{2,000})$ plants become about $50-60\%$ higher than that of 350 ${\mu}L\;L^{-1}\;CO_2(=C_{350})$ plants on 7 days treatment. But the enhancement of $P_N$ by high $CO_2$ was not maintained throughout all the experimental period. At 21 days, there was no difference of photosynthetic rates between $C_{350}\;and\;C_{2,000}$ plants. In contrast with photosynthesis, the response of leaf conductance to the elevated $CO_2$ concentration was very different between I-214 and Peace. During all experimental period, leaf conductance $(g_s)$ of $C_{2,000}$ plants is $50\%$ lower than that of the $C_{350}$ plants for I-214, while there is no difference of $g_s$ between the plants of $C_{350}\;and\;C_{2,000}$ on for Peace. The results of gs in Peace indicate that decreased photosynthetic rate after 21 days in $C_{2,000}$ on plants for two poplar clones is possibly due to non-stomatal factors. To investigate the non-stomatal factors, starch accumulation and ribulose-1,6-bisphosphate carboxylase (RuBPCase) were measured. We found significant accumulation of starch in two poplar clones exposed to high $CO_2,$ especially starch of I-214 in $C_{2,000}$ become 3.5 times higher than in $C_{350}$ plants at 21 days. This suggests that high proportion of photosynthates was directed into starch. After 21 days, the activity of ribulose-1, 6-bisphosphate carboxylase of $C_{2,000}$ plants become decreased in $40-50\%$ compared with that of the $C_{350}$ plants. Two poplar clones show the same trend to RuBPCase declines under high $CO_2$ concentration, although the decline is more significant for I-214. The results reported here suggest that starch accumulation and decreased RuBPCase activity in $C_{2,000}$ plants can be partly ascribed to the loss of photosynthetic efficiency of high $CO_2-grown$ poplar plants.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.51-59
• /
• 1992

Two comparative poplar clones (I-214: Populus euramerinm, Peace: P koreana x p. trihocarpa) were exposed to two $CO_2$ concentrations (350 or 2, 000 ${\mu}L L^{-1} CO_2$) for 21 days. When both poplar clones were compared at growth conditions, the net photosynthetic rate ($P_N$) in $CO_2$-enriched ($2, 000{\mu}L L^{-1} CO_2 = C_{2, 000}$) plants become about 50-60% higher than that of 350 ${\mu}L L^{-1} CO_2 (=C_{350}$ Plants on 7 days treatment. But the enhancement of PN by high $CO_2$ was not maintained throughout all the experimental period. At 21 days, there was no difference of photosynthetic rates between $C_{350}$ and $C_{2000}$ plants. In contrast with photosynthesis, the response of leaf conductance to the elevated $CO_2$ concentration was very different between I-214 and Peace. During all experimental period, leaf conductance ($g_{s}$) of $C_{2000}$ plants is 50% lower than that of the $C_{350}$ plants for I-214, while there is no difference of gs between the plants of $C_{350}$ and $C_{2, 000}$ for Peace. The results of gs in Peace indicate that decreased photosynthetic rate after 21 days in $C_{2, 000}$ Plants for two poplar clones is possibly due to non-stomatal factors. To investigate the non-stomatal factors, starch accumulation and ribulose-1, 6-bisphosphate carboxylase (RuBPCase) were measured. We found significant accumulation of starch in two poplar clones exposed to high $CO_2$, especially starch of I-214 in $C_{2, 000}$ become 3.5 times higher than in $C_{350}$ plants at 21 days. This suggests that high proportion of photosynthates was directed into starch. After 21 days, the activity of ribulose-1, 6-bisphosphate carboxylase of $C_{2, 000}$ plants become decreased in 40-50% compared with that of the $C_{350}$ plants. Two poplar clones show the same trend to RuBPCase declines under high $CO_2$ concentration, although the decline is more significant for I-214. The results reported here suggest that starch accumulation and decreased RuBPCase activity in $C_{2, 000}$ plants can be partly ascribed to the loss of photosynthetic efficiency of high $CO_2$-grown poplar plants.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.18 no.1
• /
• pp.11-15
• /
• 2007

Background and Objectives: $VoCoM^{(R)}$ is a set composed of prefabricated hydroxylapatite implants and shims of various sizes that are designed for the type I thyroplasty, Authors aimed to evaluate the efficacy of $VoCoM^{(R)}$ System in type I thyroplasty. Materials and Method: Twenty three patients with unilateral vocal cord palsy were included in the study, who received type I thyroplasty with $VoCoM^{(R)}$ between May 2000 and May 2007 in St. Mary's Hospital, The Catholic University of Korea, Seoul, Korea, Acoustic, aerodynamic and stroboscopic analyses were performed pre-and post-operatively, Subjective voice improvement was analysed by Voice handicap index, Results : Preoperative jitter was $4.68{\pm}2.46%$ and improved to $3.19{\pm}1.94%$(P<0,05), Preoperative NHR was $0.26{\pm}0.1$ and improved to $0.18{\pm}0,07$(P<0.05), Preoperative MPT was $6.16{\pm}4.9$secs improved to $9.55{\pm}4.67$secs(p<0.05), The postoperative stroboscopy revealed an effective medialization of vocal fold of all patients, Conclusion: Type I thyroplasty using $VoCoM^{(R)}$ is a efficient, safe and convenient way of vocal fold medialization at the expense of its high cost and difficulty in removal.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.34-41
• /
• 2022

Smelting reduction of spent lithium-ion batteries results in metallic alloys, slag, and dust containing Li(I). Precipitation of Li₂CO₃ was performed using the synthetic leachate of the dust. Herein, the effects of the precipitant and addition of non-aqueous solvents on the precipitation of Li(I) were investigated. Na₂CO₃ was a more effective precipitating agent than (NH₄)₂CO₃ owing to the hydrolysis reaction of dissolved ammonium and carbonate. The addition of acetone or ethanol improved the Li(I) precipitation percentage for both the precipitants. When using (NH₄)₂CO₃, the Li(I) precipitation percentage increased at a solution pH of 12. Under the same conditions, the Li(I) precipitation percentage using Na₂CO₃ was much higher than that using (NH₄)₂CO₃.

• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.99-106
• /
• 2006

The electronic absorption spectra of [3-(2-thenoyl) 3-(p-NO2-phenylhydrazone) ethyl pyruvate] (I), p-Br (II) and p-CH3 (III) were studied in ethanol and the spectra comprise four absorption bands which assigned to the corresponding electronic transition. The pK values of these compounds have been determined spectrophotometrically and pH-metrically, the results shown that the interval range for color change of compound (I) is (8-10) similar to that of phenolphethalin indicator, indicating that this compound can be used as acid-base indicator. The successive stability constants of the compounds under study with some transition elements (Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), UO2(II), La(III) and Zr(IV) have been determined pH- metrically. Stoichiometric complexes with ratios 1:1 and 1:2 (M: L) were formed for all metals. The pK of the three derivatives and the values of the stability constant (logK) of the complexes have the order; III > II > I. Also conductometric titrations have been carried out and the results show that this titration can be used for determination of both the metal ion and the ligand concentrations by each others.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.134-142
• /
• 1996

The epi-CoSi$_{2}$ layer was formed by alloying a Co(120$\AA$)/Ti(50$\AA$) bilayer. In addition, the ultra shallow p$^{+}$n junction of which depth is about not more than 40nm at the background concentration, 10$^{18}$atoms/cm$^{3}$ could be formed by annealing (RTA-II) the ion implanted epi-silicide. When the temperature of RTA-I is as low as possible and that of RTA-II is moderate, the p$^{+}$n junction that has low leakage current and stable epi-silicide layer could be obtained. That is, when th econdition of TRA-I was 900$^{\circ}C$/20sec and that of RTA-II was 900$^{\circ}C$/10sec, the reverse leakage current was as high as 11.3$\mu$A/cm$^{2}$ at -5V. The surface of CoSi$_{2}$ appeared considerably rough. However, when the conditon of RTA-I was 800$^{\circ}C$/20sec or 700$^{\circ}C$/20sec, the leakage currents were as low as 8.3nA/cm$^{2}$ and 9.3nA/cm$^{2}$, respectively and also the surfaces appeared very uniform.