• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.406-413
• /
• 2012

Effect of three additives, chitosan, ferric chloride, and MPE50 on membrane fouling reduction was studied. They were introduced with various dosing rate into activated sludge, and changes in filtration resistance measured by the batch cell filtration test were evaluated. Both the filtration resistance and the specific cake resistance were minimized at 20 mg/g-MLSS with chitosan, 70 mg/g-MLSS with ferric chloride, and 20 mg/g-MLSS with MPE50 addition, respectively. Introduction of the additives into the activated sludge resulted in reduction of not only cake resistance, but also fouling resistance. However, the chitosan addition to three different activated sludge resulted in three different optimal dose of 10, 20, 30 mg/g-MLSS, respectively. This implies that the optimal dose is dependent on sludge characteristics rather than a constant value. Overdose above the optimal dosage always aggravated filterability in all cases. Zeta potential of sludge flocs, relative hydrophobicity, floc size distribution, soluble EPS concentration and supernatant turbidity were measured in order to analyze fouling reduction mechanism. Nearly neutral surface charge along with the largest particle size was observed at the optimal dose. This could be explained by particle destabilization and restabilization mechanism as positively charged additives were injected into sludge flocs of negative surface charge. Both soluble EPS concentration and supernatant turbidity also showed the lowest value at the optimal dose. These foulants are believed to be coagulated and entrapped in sludge flocs during flocculation. Chitosan and MPE50 which are cationic polymeric substances showed higher reduction in both soluble EPS and fine particles comparing with ferric chloride.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1168-1179
• /
• 2017

In this study, we tried to screen the Bacillus strain having safety probability by isolation of strains from traditional fermented food, measurement of probiotic properties, and the fermentative characteristics of Cheonggukjang. We isolated 400 Bacillus-like isolates from traditional fermented foods. Selected strains examined on the prevalent characteristic such as extracellular enzyme and antibacterial activities, and their safety probability was confirmed by biogenic amine productivity, hemolytic, and harmful substances and enzyme productivity. We selected the 5 strains by analysis of biogenic amine, antibacterial and B. cereus toxic associated gene. Five selected strains were examined on cell surface hydrophobicity, and bile and acid tolerance, and we selected the SRCM100730 as the final strain. SRCM100730 was confirmed B. amyloliquefaciens by 16S rRNA sequencing, and named the B. amyloloquefaciens SRCM100730 (KCCM11966P). Finally, we manufactured Cheonggukjang using SRCM100730 for confirmation of fermentation properties. Manufactured Cheonggukjang did not contain B. cereus, and showed that ${\gamma}$-PGA and extracellular enzyme activities were superior to commercial Chunggukjang. Amino nitrogen content was 544.02 mg% and 26 free amino acid were detected, and the bitterness-related amino acid content was lower than commercial Cheonggukjang. Especially, the amount of GABA was 3 fold higher than commercial Cheonggukjang. These results suggest that SRCM100730 have high availability in commercial probiotics market and fermented food industry.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.204-211
• /
• 2006

For the production of the recombinant human interferon-gamma(rhIFN-${\gamma}$) in Escherichia coli, human glucagon and ferritin heavy chain were used as fusion partners. Even though rhIFN-${\gamma}$ is expressed as an inclusion body form in E. coli because of strong hydrophobicity of itself, over 50% of fused rhIFN-${\gamma}$ was expressed as soluble form in E. coli $Origami^{TM}$(DE3) harboring pT7FH(HE)-IFN-${\gamma}$ which encodes ferritin heavy chain-fused rhIFN-${\gamma}$. In the case of using glucagon-ferritin heavy chain hybrid mutant as a fusion partner, 6X His-tag was additionally introduced to N-terminus of GFHM(HE)-IFN-${\gamma}$ for enhancing purification yields of rhIFN-${\gamma}$. Fusion protein HGFHM(HE)-IFN-${\gamma}$ with two 6X His-tag was more effectively bound to Ni-NTA agarose bead than GFHM(HE)-IFN-${\gamma}$ with a 6X His-tag. rhIFN-${\gamma}$ was completely purified from enterokinase-treated HGFHM(HE)-IFN-${\gamma}$ by Ni-NTA affinity column. For high-level production of rhIFN-${\gamma}$, glucose was used as the sole carbon source with simple exponential feeding rate($2.4{\sim}7.2g/h$) in fed-batch process. The effective lactose concentration for the expression of the rhIFN-${\gamma}$ was $10{\sim}20mM$. Under the fed-batch culture conditions, rhIFN-${\gamma}$ production yield reached 11 g DCW/L for 6 hours after lactose induction.

• Korean Journal of Microbiology
• /
• v.54 no.4
• /
• pp.384-397
• /
• 2018

The aim of this study is to screen the strains of Bacillus spp. possessing safety, probiotic activity, and so on, which can be utilized as probiotic resource for using the feed and supplement food of companion animal. About 300 isolates were isolated from traditional Korean sauces, four isolates that did not have or produce the six kinds of B. cereus type vomiting and diarrhea toxin genes, ${\beta}$-hemolytic, and three kinds of carcinogenic enzymes were selected. Antibiotic gene retention, cell surface hydrophobicity, antibiotic sensitivity, and glucose utilization were analyzed for four isolates, and finally SRCM 100731 was selected. SRCM 100731 was named as Bacillus amyloliquefaciens SRCM 100731 16S rRNA sequencing analysis, and carried out optimization of cell growth for industrial applications such as pet food and feed. The effects of 14 different components on cell growth were investigated and three significant positive factors, molasses, sodium chloride, and potassium chloride were selected as the main factors based on a Plackett-Burman design. In order to find out optimal concentration on each constituent, we carried out central composite design. The predicted optimized concentrations were 7% molasses, 1.1% sodium chloride, 0.5% potassium chloride. Finally, an overall about 7-fold increase in dry cell weight yield ($12.6625{\pm}0.0658g/L$) was achieved using the optimized medium compared with the non-optimized medium ($1.8273{\pm}0.0214g/L$). This research is expected to be highly utilized in the growing pet industry by establishing optimal cultivation conditions for industrial application as well as screening Bacillus amyloliquefaciens SRCM 100731 as probiotic resource for companion animal.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.2
• /
• pp.67-73
• /
• 2018

$[^{11}C]PIB$ synthesis has been performed by a loop-methylation and HPLC purification in our lab. However, this method is time-consuming and requires complicated systems. Thus, we developed an on-cartridge method which simplified the synthetic procedure and reduced time greatly by removing HPLC purification step. We compared 6 different cartridges and evaluated the $[^{11}C]PIB$ production yields and specific activities. $[^{11}C]MeOTf$ was synthesized by using TRACERlab FXC Pro and was transferred into the cartridge by blowing with helium gas for 3 min. To remove byproducts and impurities, cartridges were washed out by 20 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ solution (pH 5.1) and 10 mL of distilled water. And then, $[^{11}C]PIB$ was eluted by 5 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ into the collecting vial containing 10 mL saline. Among the 6 cartridges, only tC18 environmental cartridge could remove impurities and byproducts from $[^{11}C]PIB$ completely and showed higher specific activity than traditional HPLC purification method. This method took only 8 ~ 9 min from methylation to formulation. For the tC18 environmental cartridge and conventional HPLC loop methods, the radiochemical yields were $12.3{\pm}2.2%$ and $13.9{\pm}4.4%$, respectively, and the molar activities were $420.6{\pm}20.4GBq/{\mu}mol$ (n=3) and $78.7{\pm}39.7GBq/{\mu}mol$ (n=41), respectively. We successfully developed a facile on-cartridge methylation method for $[^{11}C]PIB$ synthesis which enabled the procedure more simple and rapid, and showed higher molar radio-activity than HPLC purification method.