• Journal of Pharmaceutical Investigation
• /
• 제40권5호
• /
• pp.285-289
• /
• 2010

Manufacturing a multi-layered tablet such as Xatral XL$^{(R)}$ is more complex and expensive than monolayered tablets, but mono-layered tablets may have less favorable release properties depending on the pharmacodynamics and pharmacokinetics of the active ingredient. We therefore sought to develop a monolayer tablet with a similar dissolution profile to the commercial alfuzosin sustained-release triple layered tablet (Xatral XL$^{(R)}$). We prepared four different mono-layered alfuzosin tablets with different concentrations of hydroxypropyl methycellulose and PVP K-90. Fomulation III with alfuzosion/mg-stearate/ HPMC/ PVP K-90 (10/5/110/95 mg/tab) has a similar dissolution rate to Xatral XL$^{(R)}$, with a similarity factor score of 81.4. However, the swelling and erosion rates of the two formulations were different, and NIR analysis showed differences in the mechanisms of drug release. Thus, although formulation III and Xatral XL$^{(R)}$ show similar dissolution rates, the mechanisms of drug release are different.

• 한국의류학회지
• /
• 제25권7호
• /
• pp.1270-1280
• /
• 2001

In this research of biodegradable polymers, it is essential to investigate the relation between biodegradability and molecular structure such as chemical constitution, hydrophilicity, molecular weight, crystallinity, chain orientation, and so on. It is also expected that hydrophilicity of polymer can affect biodegradability because biodegradation occurs with the help of enzymes and microorganisms. This study is to investigate the effect of hydrophilicity on biodegradability of polyesters. Hydrophilicity was varied by adding 5~30 mol% of amide groups, since amide groups are hydrophilic and used for improving thermal and mechanical properties. Surface energies and nitrogen contents by ESCA were measured to determine their hydrophilicity. The biodegradation was examined in activated sludge, enzyme and natural soil by $CO_2$evolution, TOC, weight loss, and observation through microscopy. The results showed that hydrophilicity of polyesteramide films increased with the addition of amide, PBAD series of shorter methylene units showed maximum hydrophilicity at 15~20 mol% of amide contents, but PBSE exhibited maximum values at 5~15 mol% of amide contents. The biodegradability increased as the hydrophilicty on surface increased. The biodegradation rate of PBAD series was higher than that of PBSE series. Therefore, it can be concluded that the addition of appropriate contents of hydrophile enhanced the biodegradability of aliphatic polyesters as well as their physical properties. Also, the experimental results revealed the relation between hydrophilicity and biodegradability of polyesteramides.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.517-526
• /
• 2017

The biodegradation and water absorption properties of lignin/poly(vinyl alcohol) (PVA) nanofibrous webs are investigated. Lignin/PVA nanofibrous webs containing 0, 50, and 85wt% of lignin were prepared via an electrospinning process to observe the effect of the lignin concentration on the biodegradability and water absorption properties of lignin/PVA nanofibrous webs. The morphology of the materials was examined by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). To understand the wetting behavior and hydrophilic nature of the electrospun lignin/PVA nanofibrous webs, the water absorbency, contact angle, and water uptake were examined. The enzymatic degradation of lignin/PVA nanofibrous webs was investigated using laccase by measuring total organic carbon (TOC) concentration over a course of 50 days. Water drops were absorbed immediately into all of the specimens. The water uptake of lignin/PVA nanofibrous webs increased as the amount of PVA in the lignin/PVA hybrid webs increased. The enzymatic degradation experiment indicated that the inherent biodegradability of lignin was retained after its transformation into nanofibers. Our findings imply that blending these two types of polymers is promising because it can lead to the development of a new range of multifunctional materials such as antimicrobial absorbent nanotextiles based on sustainable biopolymers.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.47-60
• /
• 1988

N-n-Propylacrylamide는 n-propyl bromide와 acrylamide로 부터 합성하였고, 합성된 N-n-propylacrylamide를 THF용매속에서 개시제로 AIBN을 사용하여 $60^{\circ}C$에서 acrylamide와 공중합시켰다. 그리고 합성된 단량체와 공중합체는 NMR과 IR에 의하여 확인하였다.

• 원예과학기술지
• /
• 제31권6호
• /
• pp.700-705
• /
• 2013

This study was initiated to evaluate hydrophilic polymers (hydrogels) as a new solid matrix medium for seed-priming of Heteropappus arenarius Kitam. Solid matrix priming (SMP)-media were prepared with the combination of Na- and K-based hydrogels and hydrogels with three different dry levels (DC; 70%, 80%, and 90%). Priming was performed in the dark at 15 or $20^{\circ}C$ for 24 hours, and all primed seeds were incubated at $20^{\circ}C$ in the dark for the germination test. Non-primed seeds and seeds primed with distilled water (DW) were also included. To reach the germination rate of 50% ($T_{50}$), it took 4.0 days for non-primed seeds, and 3.6 and 3.9 days for DW-primed seeds at 15 and $20^{\circ}C$, respectively. Na-based hydrogel-primed seeds with 70% DC (Na 70%) showed the fastest germination, which respectively took and 1.9 and 1.8 days at 15 and $20^{\circ}C$ to $T_{50}$. K-based hydrogel-primed seeds with 70% DC showed the fastest germination among K-based hydrogels with various DC levels, but it took 0.6 days more to $T_{50}$ compared to Na 70%. The hydration rate (HR) of DW-primed seeds was 37% lower than that of Na 70%-primed seeds at $15^{\circ}C$ priming temperature, which indicates that Na 70% priming is the best solid matrix priming condition for promoting the germination of H. arenarius seeds.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권1호
• /
• pp.15-22
• /
• 2015

Poly(ethylene glycol) end-capped with pentafluorophenyl group(s) in ABA (FP-PEG-FP) and AB (mPEG-FP) types were prepared. Even though they were similar in composition, the lower critical solution temperature (LCST) of FP-PEG-FP was observed at $23^{\circ}C$, whereas that of mPEG-FP was observed at $65^{\circ}C$. To understand the large difference in solution behaviour of the two polymers, UV-VIS spectroscopy, microcalorimetry, 1H-NMR spectroscopy, and dynamic light scattering were used. FP-PEG-FP has two hydrophobic pentafluorophenyl groups at the ends of hydrophilic PEG (1000 Daltons), whereas mPEG-PF has a highly dynamic PEG (550 Daltons) block that are anchored to a hydrophobic pentafluorophenyl group. PF-PEG-PF not only has a smaller conformational degree of freedom than mPEG-PF but also can form extensive intermolecular aggregates, therefore, PF-PEG-PF exhibits a significantly lower LCST than mPEG-PF. This paper suggests that topological control is very important in designing a temperature-sensitive polymer.

• 대한화학회지
• /
• 제53권3호
• /
• pp.345-354
• /
• 2009

새로운 연료전지용 고분자 전해질 막으로서 알릴기로 터미네이션된 술폰화된 PES계 고분자 를 비스아자이드와의 열적 가교 반응을 이용하여 합성하였다. 공중합체의 조성은 $^1H$ NMR에 의해 확 인되었다. 전도성 부분인 친수성 영역의 균일한 분포와 견고한 에터 술폰계 고분자 주골격의 끝부분에 만 가교기를 도입하여 소수성 영역을 최소화 하는 전략으로 얻어진 가교 고분자 막은 높은 온도에서 우 수한 수소이온 전도도와 열적 안정성을 나타내었으며 또한, 나피온에 비해 3배 이상의 수소이온 선택 성을 나타내었다.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.359-364
• /
• 2006

Di-block copolymers composed of two biocompatible polymers, poly(ethylene glycol) and poly(D,L-lactide), were synthesized by ring-opening polymerization for preparing polymer vesicles (polymersomes). Emulsion solvent evaporation method was used to fabricate the polymersomes. Scanning electron microscope (SEM) images confirmed that polymersomes have a hollow structure inside. Confocal laser microscope and optical microscope were also used to verify the hollow structure of polymersomes. Polymersomes having various sizes from several hundred nanometers to a few micrometers were fabricated. The size of the polymersomes could be readily controlled by altering the relative hydrodynamic volume fraction ratio between hydrophilic and hydrophobic blocks in the copolymer structure, and by varying the fabrication methods. They showed greatly enhanced stability with increased molecular weight of PEG. They maintained their physical and chemical structural integrities after repeated cycles of centrifugation/re-dispersion, and even after treatment with surfactants.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.487-488
• /
• 2006

Novel bisphenol-based wholly aromatic poly(ether sulfone-ketone) copolymer containing pendant sulfonate groups were prepared by direct aromatic nucleophilic substitution polycondensation of 4,4-difluorobenzophenone, 2,2'-disodiumsulfonyl-4,4'-fluorophenylsulfone (40mole% of bisphenol A) and bisphenol A. Polymerization proceeded quantitatively to high molecular weight in N-methyl-2-pyrrolidinone at $180^{\circ}C$. Organic-inorganic composite membranes were obtained by mixing organic polymers with hydrophilic $SiO_2$ (ca. 20nm) obtained by sol-gel process. The polymer and a series of composite membranes were studied by FT-IR, $^1HNMR$, differential scanning calorimetry (DSC) and thermal stability. The proton conductivity as a function of temperature decreased as $SiO_2$ content increased, but methanol permeability decreased. The nano composite membranes were found to posse all requisite properties; Ion exchange capacity (1.2meq./g), glass transition temperatures $(164-183\;^{\circ}C)$, and low affinity towards methanol $(4.63-1.08{\times}10^{-7}\;cm^2/S)$.

• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.