• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.128.1-128.1
• /
• 2011

In amorphous silicon and crystalline silicon(a-Si:H/c-Si) heterojuction solar cells, intrinsic hydrogenated amorphous silicon(a-Si:H) films play an important role to passivate the crystalline silicon wafer surfaces. We have studied the correlation between the surface passivation quality and nature of the Si-H bonding at the a-Si:H/c-Si interface. The samples were obtained by VHF-CVD under different deposition conditions. The passivation quality and analysis of all structures studied was performed by means of quasi steady state photoconductance(QSSPC) methods and fourier transform infrared spectrometer(FTIR) measurements respectively.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1277-1279
• /
• 1993

As a highly information-oriented society developes, various kinds of amorphous semiconductor devices, such as solar cells, electrographic printers, image sensors, and flat-panel televisions, have been developed as man/machine interfaces. This paper proposed the laser CVD techniques to deposit hydrogenated amorphous silicon thin film on glass or dielectric substrate at low temperatures. Varying the deposition conditions, we examined optical and electrical charateristics of a-Si:H film deposited by Laser CVD.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.506-514
• /
• 1986

Experimental results are reported concerning temperture effects from room temperature to 100\ulcorner on the optical properties of N-and P-type hydrogenated amorphous silicon films prepared by RF glow discharege. Optical absorption coefficient and optical bandgap have been measured and analyzed as a function of temperature. Optical absorption coefficient increase monotonically with temperature, while the optical bandgape of doped amorphous silicons decrease linearly by about 4-7x10**-4 [ev/k].

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.3
• /
• pp.278-282
• /
• 2004

The Hydrogenated amorphous carbon(a-C:H) thin films are deposited on silicon with a close field unbalanced magnetron(CFUBM) sputtering systems. The experimental data are obtained on the depositon rate and physical properties of a-C:H films using DC bias voltage and Ar/C$_2$H$_2$ pressure. The depostion rate and the surface roughness decrease with DC bias voltage, but the hardness of the thin films increases with DC bias voltage. And the position of G-peak moves to lower wavenumber indicating an increase in diamond-like carbon characteristics with the lower Ar/C$_2$H$_2$ pressure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.748-752
• /
• 2004

The Hydrogenated amorphous carbon (a-C:H) thin films are deposited to fabricate suppored layer on silicon substrate with a closed field unbalanced magnetron(CFUBM) sputtering system. This study focuses on the characteristic of Diamond like carbon (DLC) films and Pb(Zr,Ti)$O_3$ (PZT) films for membrane structure. The deposition rate and the surface roughness of DLC fims decrease with DC bias voltage. hardness is 26 GPa at -200 V. Interface of DLC/Si and Pt/DLC layers was excellent.

• Korean Journal of Materials Research
• /
• v.19 no.2
• /
• pp.102-107
• /
• 2009

The effect of annealing under argon atmosphere on hydrogenated amorphous silicon (a-Si:H) thin films deposited at room temperature and $300^{\circ}C$ using Radio Frequency (RF) magnetron sputtering has been investigated. For the films deposited at room temperature, there was not any increase in hydrogen content and optical band gap of the films, and as a result, quality of the films was not improved under any annealing conditions. For the films deposited at $300^{\circ}C$, on the other hand, significant increases in hydrogen content and optical band gap were observed, whereas values of microstructure parameter and dark conductivity were decreased upon annealing below $300^{\circ}C$. In this study, it was proposed that the Si-HX bonding strength is closely related to deposition temperature. Also, the improvement in optical, electrical and structural properties of the films deposited at $300^{\circ}C$ was originated from thermally activated hydrogen bubbles, which were initially trapped at microvoids in the films.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1164-1169
• /
• 2012

This paper presents a study of an integrated infrared (IR) photo sensor for display application. We fabricated hydrogenated amorphous silicon thin film transistor (a-Si:H TFT) and hydrogenated amorphous silicon germanium thin film transistor (a-SiGe:H TFT) which were bottom gate structure. We investigated the dependence of a-SiGe:H TFT characteristics on incident wavelengths. We proposed photo sensor which responded to wavelengths of IR region. Proposed pixel circuit of photo sensor was consists of switch TFT and photo TFT, and one capacitor. We developed integrated photo sensor circuit and investigated the performance of the proposed sensor circuit according to the input wavelengths. The developed photo sensor circuit with a-SiGe:H TFT was suitable for IR.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.2
• /
• pp.146-149
• /
• 2017

Si clusters generated during the plasma chemical vapor deposition (CVD) process have a great influence on the quality of the fabricated films. In particular, in hydrogenated amorphous silicon thin films (a-Si:H) used for thin film solar cells, Si clusters are mainly responsible for light-induced degradation. In this study, we investigated the amount of clusters incorporated into thin films using a quartz crystal microbalance (QCM) and specially designed cluster eliminating filters, and investigated the effect of the DC grid mesh in preventing cluster incorporation. Experimental results showed that as the applied voltage of the grid mesh, which is placed between the electrode and the QCM, decreased, the number of clusters incorporated into the film decreased. This is due to the electrostatic force from the grid mesh bias, and this method is expected to contribute to the fabrication of high-quality thin films by preventing Si cluster incorporation.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.509-512
• /
• 1987

We report that the optimum substrate temperature to fabricate a-Si:H $n^+-p-p^+$ cell decreases with increasing the boron concentration in the Player. The results can be explained as the dependence of substrate temperature for the relaxation of silicon atoms and the bonded hydrogen concentration in the player.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.426.1-426.1
• /
• 2016

We report high work function Aluminum doped zinc oxide (AZO) films as insertion layer as a function of O2 flow rate between transparent conducting oxides (TCO) and hydrogenated amorphous silicon oxide (a-SiOx:H) layer to improve open circuit voltage (Voc) and fill factor (FF) for high efficiency thin film solar cell. However, amorphous silicon (a-Si:H) solar cells exhibit poor fill factors due to a Schottky barrier like impedance at the interface between a-SiOx:H windows and TCO. The impedance is caused by an increasing mismatch between the work function of TCO and that of p-type a-SiOx:H. In this study, we report on the silicon thin film solar cell by using as insertion layer of O2 reactive AZO films between TCO and p-type a-SiOx:H. Significant efficiency enhancement was demonstrated by using high work-function layers (4.95 eV at O2=2 sccm) for engineering the work function at the key interfaces to raise FF as well as Voc. Therefore, we can be obtained the conversion efficiency of 7 % at 13mA/cm2 of the current density (Jsc) and 63.35 % of FF.