• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.8-14
• /
• 2024

In this study, the scale of renewable photovoltaic(PV) panels and hydrogen fuel storage facilities required to achieve "net zero carbon emissions" in military facilities were predicted based on actual electricity consumption. It was set up to expect the appropriate installation size of PV panel and hydrogen fuel storage facility for achieving carbon neutrality, limited to the electricity consumption in the public sector, including national defense and social security administration in Yeongcheon. The experimental results of this paper are largely composed of two parts. First, representative meteorological factors were considered to predict solar power generation in the Yeongcheon area, and solar power generation was estimated through a multiple regression model using deep learning techniques. Second, the size of solar power generation facilities and hydrogen storage facilities in military bases was estimated with the amount of solar power generation and electricity consumption. As a result of this analysis, it was calculated that a site of 155.76×104 m² for PV panels was needed and a facility capable of storing 27,657 kg of hydrogen gas was required. Through these results, it is meaningful to demonstrated the prospect that military units can lead the achievement of "carbon net zero 2050" by using PV panels and hydrogen fuel storage facilities on idle sites of military bases.

• 유기물자원화
• /
• 제19권2호
• /
• pp.22-27
• /
• 2011

본 연구에서는 음식물류폐기물폐수와 양돈폐수를 특별히 전처리 하지 않고 3:7의 비율로 혼합하여 연속반응공정을 이용한 수소생산의 최적 인자를 도출하기 위해 연구를 수행하였다. 본 연구결과 수소발생량은 pH 5.5의 조건에서 가장 많이 발생하였으며, 이를 통해 음식물류폐기물과 양돈폐수의 혼합시의 수소생산의 최적 pH는 5.5 임을 확인하였다. HRT에 따른 수소발생량은 3일보다 4일의 경우에 높은 수소발생량을 보였으며, 이는 HRT값의 변화에 따라 수소발생미생물의 활성에 크게 관여하는 것으로 HRT역시 수소발생미생물에 중요한 인자로 작용한다고 판단된다. 유기물의 제거율은 운전 6일째에 최대 TS 52%, VS 71%, TSS 83%, VSS 89%의 제거율을 기록하였으며, 수소생산 공정을 통하여도 유기물의 제거가 가능함을 확인하였다.

• 전기화학회지
• /
• 제14권4호
• /
• pp.191-195
• /
• 2011

Wet chemical etching methods were utilized to conduct Si surface texturing, which could enhance photoelectrochemical hydrogen generation rate. Two different etching methods tested, which were anisotropic metal-catalyzed electroless etching and isotropic etching. The Si nano-texture that was fabricated by the anisotropic etching showed ~25% increase in photocurrent for H2 generation. The photocurrent enhancement was attributed to the reduced reflection loss at the nano-textured Si surface, which provided a layer of intermediate density between water and the Si substrate.

• 에너지공학
• /
• 제5권2호
• /
• pp.198-202
• /
• 1996

Reactive metals like aluminum generate hydrogen gas when it reacts with water. Aluminum, despite its high chemical affinity with water, cannot continue the reaction due to the passive oxide layers formed on its surface. When the reaction is assisted by electrical energy dissipation in the form of discharge, the reaction is more likely to be sustained. In this report, some preliminary experimental results are presented regarding the hydrogen generation based on this scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.733-734
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2850-2855
• /
• 2008

Very High Temperature Reactor (VHTR) has been selected as a high energy heat source for a nuclear hydrogen generation. The VHTR heat is transferred to a thermo-chemical hydrogen production process through an intermediate loop. Both Process Heat Exchanger and sulfuric acid evaporator provide the coupled components between the VHTR intermediate loop and hydrogen production module. A small scaled Compact Nuclear Hydrogen Coupled Components test loop is developed to simulate the VHTR intermediate loop and hydrogen production module. Main objective of the loop is to screening the candidates of NHDD (Nuclear Hydrogen Development and Demonstration) coupled components. The operating condition of the gas loop is a temperature up to $950^{\circ}C$ and a pressure up to 6.0MPa. The thermal and fluid dynamic design of the loop is dependent on the structures that enclose the gas flow, especially primary side that has fast gas velocity. We designed and constructed a small scale sulfuric acid experimental system which can simulate a part of the hydrogen production module also.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.156-168
• /
• 2023

This study investigates the high temperature oxidation behaviour of a Ni-20Cr-1.2Si (wt.%) alloy in steam from 1200 ℃ to 1350 ℃ by Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD). The results demonstrate that exposed Ni-based alloy developed a thin oxide scale, consisted mainly of Cr₂O₃. The oxidation kinetics obtained from the experimental results was applied to evaluate the hydrogen generation considering a simplified reactor core model with different cladding alloys following an unmitigated Loss-Of-Coolant Accident (LOCA) scenario in a hypothetical Small Modular Reactor (SMR). Overall, experimental data and simulations results show that both Fe-based and Ni-based alloys may enhance cladding survivability, delaying its melting, as well as reducing hydrogen generation under accident conditions compared to Zr-based alloys. However, a substantial neutron absorption occurs when Ni-based alloys are used as cladding for current uranium-dioxide fuel systems, even when compared to Fe-based alloys.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3261-3266
• /
• 2012

수소발생 및 저장 물질로서 붕수소화나트륨($NaBH_4$)은 촉매 분해반응을 통하여 수소를 생성할 수 있는데, 이 프로타이드 화합물을 이용하여 가정용 또는 이동용 연료전지의 수소를 공급할 수 있어서, 이 화합물과 분해반응에 대한 연구가 많이 수행되고 있다. 본 연구에서는 알칼리성 $NaBH_4$ 수용액을 귀금속이 담지된 금속산화물 촉매를 이용하여 가수분해반응을 일으키고, 그 분해반응 산물인 수소의 발생량을 측정하였다. 지지체로 사용한 금속산화물의 종류를 비교하고, 함침된 귀금속으로서 백금과 루테늄을 비교하였으며, 촉매사용량, $NaBH_4$ 용액의 농도 등의 영향을 고찰하고, 수소 발생 패턴을 조사하였다.

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.173-180
• /
• 2015

The purpose of this study was to fabricate a ferric nitrate impregnated activated carbon, and the performance for hydrogen sulfide by adsorption was evaluated. Sodium hydroxide was utilized to control pH in the process during generation of ferric hydroxide on the surface of the carbon. Critical mixing duration for generation of ferric hydroxide on the carbon was 48 hrs at pH 1 of the solution, in which the chemical adsorption of hydrogen sulfide was enhanced. The adsorption capacity of the impregnated carbon increased up to 0.10 g hydrogen sulfide/g carbon, which was 4.3 times higher than that of the raw carbon. Presence of FeOOH on the surface of the impregnated carbon was examined by X-ray diffraction.

• 에너지공학
• /
• 제13권1호
• /
• pp.1-11
• /
• 2004

가스화기술은 전세계적으로 수소에너지 사회로 진입하는 과정에서 필요한 대량수소 공급체계를 구축하는데 중단기적으로 필요한 기술이다. 장기적으로는 풍력이나 태양광과 같은 순수한 재생가능에너지에 기반한 수소공급 체계로 발전될 것이나, 향후 10-20년간 대량수순 제조가 필요하다면 경제성이 있는 기술을 $CO_2$ 발생이 최소화되면서 효율도 높은 기술로 발전시켜 적용하는 방향으로 진행될 것이다. 특히, 국내에서는 천연가스, 석탄, 중질잔사유, 폐기물, 바이오매스 등의 원료로부터 출발한 수소제조가 경제적인 측면에서 유리하므로 최소한 중단기적으로는 활용될 것으로 보인다 수소에너지 이슈가 부각되는 배경중의 하나가 기후변화협약에 대응한 $CO_2$저감의 필요성이므로, 이들 중단기적으로 활용될 원료들의 수소제조기술들은 반드시 $CO_2$저감이 가능한 기술로서 개발되어야 한다.