• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.447-452
• /
• 2011

Depletion of petroleum increased the need of alternative energy and chemical resources. Biomass, a renewable resource, can be transformed to bioenergy and biomaterials, and the materials from biomass will ultimately substitute petroleum based energy and chemical compounds. In this perspective, production of C4-C6 compounds for bioenergy and biomaterials are described for understating of current research progress. n-Butanol and n-butyric acid, the major C4 compounds, are produced by Clostridium tyrobutyricum, Clostridium beijerinckii, and Clostridium acetobutylicum. n-Hexanoic acid, a typical C6 compound, is produced by Clostridium kluyveri and Megasphaera elsdenii. Reported maximum amount of n-butanol, n-butyric acid and n-hexanoic acid was 21, 55, and 19 g/L, respectively, and extraction of these C4-C6 compounds are induced increase production by those anaerobic bacteria. In addition, a new bacterium Clostridium sp. BS-1 produced 5 g/L of n-hexanoic acid using galactitol.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.91-99
• /
• 2010

Extraction and bleaching of citric acid- and pepsin-soluble collagens (ASC and PSC, respectively) from shark (Isurus oxyrinchus) skin and muscle were investigated. The optimal sodium hydroxide concentration for extraction was 0.3 M and the optimal treatment time for removal of foreign material was 9 h. The optimal sodium hypochlorite level for bleaching of shark skin was 0.48% (w/v), and sodium hypochlorite was a better bleaching agent than acetone, hydrogen peroxide (10%, v/v), sodium sulfite (0.48%, w/v), sodium thiosulfate (0.48%, w/v), or sodium metabisulfite (0.48%, w/v). Optimal citric acid concentration and extraction time for ASC were 0.3 M and 72 h, respectively, whereas optimal conditions for extraction of PSC were treatment with 0.1 M citric acid containing 0.1% (w/v) pepsin for 24 h. Protein contents in ASSC (acid-soluble shark skin collagen), ASMC (acid-soluble shark meat collagen), PSSC (pepsin-soluble shark skin collagen), and PSMC (pepsin-soluble shark meat collagen) were 88.66%, 83.09%, 90.33%, and 84.81% (on a dry weight basis), respectively, similar to that of commercial marine collagen (88.86%). Net collagen contents of ASSC, ASMC, PSSC, and PSMC, calculated from hydroxyproline levels, were 70.31%, 25.70%, 83.09%, and 32.94%, respectively. The yields of freeze-dried ASSC, ASMC, PSSC,and PSMC were 57.22%, 53.85%, 23.28%, and 20.61%.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.53-58
• /
• 2018

Solvent extraction of Li(I) from weak HCl solution was investigated by the mixture of TBP/MIBK with other neutral extractants such as Cyanex 923, TOPO and TOP. The TBP/MIBK organic phase was loaded with 0.1 M $FeCl_3$ at different HCl concentrations (1-9 M). Extraction of Li(I) from weak HCl solution is related to the stability of $FeCl_3$ in the organic mixture. As HCl concentration increased in preparing the loaded TBP phase, the stripping percentage of Fe(III) during the extraction of Li(I) became reduced and thus Li(I) could be extracted by ion exchange reaction with hydrogen ion in the organic. The concentration of TBP in the extractant mixture affected the stability of $FeCl_3$. Compared to TBP, Fe(III) was easily stripped from the loaded MIBK and thus no Li(I) was extracted by the mixture with MIBK. The nature of neutral extractant with TBP/MIBK showed little difference in the extraction of Li(I) and stripping of Fe(III).

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.281-291
• /
• 1998

An analytical method for the simultaneous measurement of trace Cu, Sn, and Bi in blood and urine has been investigated by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Microwave oven was used for the pretreatment of blood samples using nitric acid and hydrogen peroxide in a closedvessel digestion system with 1 mL whole blood for 8 minutes. Amberlite IRC-718 resin was used as a solid phase in solid-liquid extraction technique for the removal of matrix interferences such as Na, S, P, and other polyatomic ion species. Detection limits for Cu, Sn, and Bi by this method were 0.000375 ng/mL, 0.000297 ng/mL, and 0.000174 ng/mL, respectively. Recoveries of 99.1% for Cu, 102.5% for Sn, and 98.4% for Bi were obtained for the standard spiked NIST SRM 955a blood sample. The developed method was applied for whole real blood and urine samples.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.995-1003
• /
• 2016

Ulmus pumila L. bark underwent distilled water extraction under three temperature condition ($4^{\circ}C$, room temperature, or $80^{\circ}C$) and two extraction times (1, or 5 min) in order to develop a functional beverage products. Changes in yield, pH, color, total phenolic (TP) content, tannin content and antioxidant activity of the aqueous extracts were evaluated for each extraction temperature and duration. Extraction conditions did not affect yield or pH value of the extracts; however CIE $b^*$ values were high in extracts prepared under high extraction temperature ($80^{\circ}C$) and long extraction duration (5 min) conditions. Both extraction temperature and duration affected the TP and tannin contents of the extracts; however, all extraction conditions resulted in ${\geq}450\;mg\;GAE/g$ TP content and ${\geq}80\;mg\;CE/g$ tannin content. All extracts exhibited ABTS and DPPH radical scavenging ability similar to that of vitamin C. Nitric oxide inhibition activity was lower in the 5 min duration sample than in the 1 min sample. The $4^{\circ}C$ extraction temperature produced an extract with the highest reducing power and hydrogen peroxide values. Extraction temperature also affected sensory evaluation results with the $80^{\circ}C$ extraction temperature producing significantly higher flavor, bitterness, and color score, than those obtained under $4^{\circ}C$ and room temperature extraction conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1594-1598
• /
• 2015

This study was performed to investigate the effects of various acidic treatment for anthocyanin and proanthocyanidin extraction from black bean. Extracts were prepared with 80% methanol solutions containing HCl, acetic, formic, phosphoric, and citric acids of different concentrations (0.1, 0.2, 0.3, 0.5, and 0.7%). Total anthocyanin content ranged from 0.74 mg/g in 0.7% citric acid to 1.74 mg/g in 0.3% HCl, depending on acid type and concentration. The major anthocyanins were delphinidin-3-glucoside (D3G), cyanidin-3-glucoside (C3G), and petunidin-3-glucoside (Pt3G). The highest C3G content was 1.12 mg/g in 0.3% HCl. Proanthocyanidin content ranged from 2.01 mg/g in 0.5% acetic acid to 5.29 mg/g in 0.3% HCl. Thus, acidic condition is a significant factor affecting anthocyanin and proanthocyanidin extraction from black bean, and the optimum extraction conditions were determined as 80% methanol containing 0.3% HCl.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.23-23
• /
• 2003

GaN-related semiconductors are of great technological importance for the fabrication of optoelectronic devices, such as blue and ultra violet light emitting diodes (LEDs), laser diodes, and photo-detectors. One of the most important applications of GaN-based LEDs is solid-state lighting, which could replace incandescent bulbs and ultimately fluorescent lamps. For solid-state lighting applications, the achievement of high extraction efficiency in LED structures is essential. For flip-chip LEDs (FCLEDS), the formation of low resistance and high reflective p-GaN contact is crucial. So far, a wide variety of different methods have been employed to improve the ohmic properties of p-type contacts to GaN. For example, surface treatments using different chemical solutions have been successfully used to produce high-quality ohmic contacts, Metallization schemes, such as Ta/Ti contacts to p-GaN, were also investigated. For these contacts, the removal of hydrogen atoms from the Mg atoms doped n the GaN was argued to be responsible for low contact resistances.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.99-105
• /
• 1997

In the paper, aging of insulating oil in pole transformer has been studied by performing accelerated thermal aging test. Dissolved gases were extracted by air bubbling method. Concentration of dissolved gases were modified by extraction ratio of each gases in insulating oil. Aging of insulating materials were proceeded by thermal degradation and oxidation reaction. Both of the reactions followed zeroch order kinetics. Formation rate equations for hydrocarbons, carbon oxides, and hydrogen were derived. It was conformed by gas analysis and UV-Visible spectrophotometric method that iron core and copper coil in pole transformer act as catalyst during the aging process.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.24-33
• /
• 1997

In this paper, aging of insulating oil in pole transformer has been studied by performing accelerated thermal aging test. Dissolved gases were extracted by air bubbling method. Concentration of dissolved gases were modified by extraction ratio of each gases in insulting oil. Aging of insulting materials were proceeded by thermal degradation and oxidation reaction. Both of the reactions followed zeroth order kinetics. Formation rate equations for hydrocarbons, carbon oxides, and hydrogen were derived. It was conformed by gas analysis and UV-visible spectrophotometric method that iron core and copper coil in pole transformer act as catalyst during the aging process.

• KSBB Journal
• /
• v.18 no.1
• /
• pp.65-69
• /
• 2003

Two molecular imprinted polymers (MIPs) were prepared by using pentoxifylline and a mixture of caffeine-theophylline (2:1, mole ratio) as the templates, MAA as the monomer, and EDMA as the crosslinker The obtained polymer particles (particle size 25-35 $\mu\textrm{m}$) were packed into a HPLC column (150$\times$3.9mm). The selectivity and chromatographic characterization of the imprinted polymers were studied using pentoxifylline, caffeine, theophylline, theobromine as samples and acetonitrile as the mobile phase, Both imprinted polymers showed increased affinity for structural analogues. By using a mixture of caffeine-theophylline templates MIPs, good separations of caffeine, theobromine and theophylline were obtained, and pentoxifylline and caffeine were partly separated.