• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.91-91
• /
• 2009

In the past decade, Pd based thin films have been studied far hydrogen gas sensors due to their high possibility for energy industry and environmental applications. In this work, we report a navel method to fabricate highly sensitive hydrogen gas sensors based on PdO thin films. The films were deposited on Si substrates in Ar and $O_2$ ambient using reactive sputtering system. A semiconductor process has been utilized to fabricate PdO films with t=40nm. We observed the resistance changes of the PdO films with various $H_2$ concentrations. It was found that the electrical properties of the thin films depend on the composition of oxygen. The sensitivity is defined as $S\;=\;(R_0-R)/R{\times}100%$, where R and $R_0$ are the resistances in the presence of exposing the hydrogen gas and air, respectively. The sensitivity of the thin films was found to be as high as about 95%. After exposing to hydrogen gas, we discovered that the nano-sized cracks formed on the surface of the PdO thin films. The nano-cracks formed in deoxidized PdO thin films were known by playing a key role to reduce more than 4 times the response time of absorption. Our results illustrate that the deoxidized PdO thin films can be used as hydrogen sensors.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.543-549
• /
• 2010

The hydrogen energy had recognized clean and high efficiency energy source. The research field of hydrogen energy was production, storage, application and transport. The commercial storage method was using high pressure tanks but it was not safety. However metal hydride was very safety due to high chemical stability. Mg and Mg alloys are attractive as hydrogen storage materials because of their lightweight and high absorption capacity (about 7.6 wt%). Their range of applications could be further extended if their hydrogenation properties and degradation behavior could be improved. The main emphasis of this study was to find an economical manufacturing method for Mg-Ti-Ni-H systems, and to investigate their hydrogenation properties. In order to examine their hydrogenation behavior, a Sievert's type automatic pressure-compositionisotherm (PCI) apparatus was used and experiments were performed at 423, 473, 523, 573, 623 and 673 K. The results of the thermogravimetric analysis (TGA) revealed that the absorbed hydrogen contents were around 2.5wt.% for (Mg8Ti2)-10 wt.%Ni. With an increasing Ni content, the absorbed hydrogen content decreased to 1.7 wt%, whereas the dehydriding starting temperatures were lowered by some 70-100 K. The results of PCI on (Mg8Ti2)-20 wt.%Ni showed that its hydrogen capacity was around 5.5 wt% and its reversible capacity and plateau pressure were also excellent at 623 K and 673 K.

• 한국수소및신에너지학회논문집
• /
• 제8권4호
• /
• pp.173-180
• /
• 1997

The Mechanically Alloyed $Ti_{0.7}Mg_{0.3}Ni$ was investigated as a function of milling time by X-ray diffraction, SEM(scanning electron microscope), EDS(energy dispersive spectrometer), P-C-Isotherm curves. After 10hrs milling, mixed $Ti_{0.7}Mg_{0.3}Ni$ powders were changed to amorphous phase. And amorphous $Ti_{0.7}Mg_{0.3}Ni$ alloys became TiNi phase crystalline after heat treatment at 873K in a vacuum for 1 hour. The hydrogen absorption capacity of the annealed $Ti_{0.7}Mg_{0.3}Ni$ alloy increased as a function of mechanical alloying time.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.116-120
• /
• 1999

Possible role of hydrogen atoms on the formation of microcrystalline silicon films was schematically investigated using a plasma enhanced chemical vapor deposition system. A layer-by-layer technique that can alternate deposition of ${\alpha}$-Si thin film and then exposure of H2 plasma was used for this end. The experimental process was extensively carried out under different hydrogen plasma times (t2) at a fixed number of 20 cycles in the deposition. structural properties, such as crystalline volume fractions and grain shapes were analyzed by using a Raman spectroscopy and a scanning electron microscopy. Electrical transports were characterized by the temperature dependence of the dark conductivity that gives rise to the calculation of activation energy (Ea). Optical absorption was measured using an ultra violet spectrophotometer, resulting in the optical energy gap (Eopt). Our experimental results indicate that both of the hydrogen etching and the structural relaxation effects on the film surface seem to be responsible for the growth mechanism of the crystallites in the ${\mu}$c-si films.

• 한국재료학회지
• /
• 제24권11호
• /
• pp.573-577
• /
• 2014

The existing metal getters are invariably covered with thin oxide layers in air and the native oxide layer must be dissolved into the getter materials for activation. However, high temperature is needed for the activation, which leads to unavoidable deleterious effects on the devices. Therefore, to improve the device efficiency and gas-adsorption properties of the device, it is essential to synthesize the getter with a method that does not require a thermal activation temperature. In this study, getter material was synthesized using palladium oxide (PdOx) which can adsorb $H_2$ gas. To enhance the efficiency of the hydrogen and moisture absorption, a porous layer with a large specific area was fabricated by an etching process and used as supporting substrates. It was confirmed that the moisture-absorption performance of the $SiO_2/Si$ was characterized by water vapor volume with relative humidity. The gas-adsorption properties occurred in the absence of the activation process.

• 공업화학
• /
• 제32권1호
• /
• pp.91-96
• /
• 2021

본 연구에서는 다양한 환경 공정에서 사용되는 황화수소 제거용 흡착탑 효율을 향상시키기 위해 유동 분석 및 흡착성능 향상 연구를 수행하였다. 연구를 위해 상업적으로 이용 가능한 다양한 활성탄에 칼륨(potassium, K)을 담지하여 개질 활성탄을 제조하였다. 또한 열처리 여부에 따라 흡착 성능과 열처리 과정에서 변화된 표면 특성 사이의 높은 상관관계를 고찰하고자 하였다. 함침법을 통해 K로 코팅된 활성탄은 57배 이상의 흡착 성능을 확인하였다. 이는 균일한 기공 형성과 탄소 표면의 K의 강한 결합은 황화수소의 화학적 및 물리적 흡수에 기여한다고 판단하였다. 다양한 상용 활성탄의 표면 구조에 대한 SEM 분석은 열처리를 통한 표면 특성의 변형으로 인해 기공 구조가 파괴되어 흡수 성능이 저하되는 것으로 확인하였다. 각 활성탄의 압력 손실 특성은 입자 크기와 모양에서 가장 낮은 압력 손실이 관찰되었다. 따라서 2~4 mesh 크기의 탄소입자 범위와 불규칙한 모양이 흡착탑의 성능을 향상시키고 경제적 효율성을 확보할 수 있다고 제안하였다.

• 천문학회보
• /
• 제45권1호
• /
• pp.63.2-63.2
• /
• 2020

FLASH is a blind neutral hydrogen (HI) absorption line survey, eventually targeting about 100,000 background radio continuum sources in the entire southern sky using the full 36-antenna of the Australian Square Kilometre Array Pathfinder (ASKAP). Our primary goal is to search for associated and intervening HI absorption lines in the intermediate redshift range 0.4 < z < 1.0. The survey aims to understand the evolution of HI gas in galaxies as well as various physical mechanisms in active galactic nuclei, such as accretion and feedback processes. In this poster, we give an overview of the FLASH survey and present the preliminary results from our first 100-hrs of pilot observations. The latest survey data covers 1,000 square degrees and is ideal for validating observation and data processing in the continuous 300MHz-width low frequency ASKAP band (700-1000MHz). One of the crucial objectives of the pilot survey is to establish the analysis methodology that will be applied to upcoming large absorption surveys in the future. We discuss our data quality validation and present some detections of associated/intervening HI absorption lines. These absorption lines allow us to trace the cold gas properties of active and normal galaxies at higher redshifts where the HI emission line is too weak to be detectable.

• 한국전기전자재료학회논문지
• /
• 제35권4호
• /
• pp.366-371
• /
• 2022

Recently many efforts have been made to develop a novel class of non-fullerene electron acceptor materials for high-performance organic solar cells. In this work, anthraquinone derivatives, TMAQ and THAQ, were prepared and their availability as electron acceptor materials for organic solar cells were investigated in terms of optical, thermal, electrochemical properties, and solar cell devices. Compared to TMAQ, a significant bathochromic shift of absorption band was observed for THAQ owing to intramolecular hydrogen-bond-assisted CT interactions. Thanks to the fused aromatic ring structure and benzoquinone unit, both TMAQ and THAQ exhibited a high thermal stability and an efficient electron reduction process. In particular, the intramolecular O-H---O=C hydrogen bond of THAQ plays an important role in improving the thermal stability and electron reduction properties. In the P3HT:acceptor solar cell system, THAQ-based devices had more than ca. 6 times higher power conversion efficiency than TMAQ -based devices. These results serve as a guide for developing high-efficient anthraquinone-based electron acceptor materials.

• 세라미스트
• /
• 제23권2호
• /
• pp.178-183
• /
• 2020

Solar energy conversion is now actively researching because of pollution. Especially silicon photocatalyst has big potential, because of wide absorption range. But low quantum yield of silicon photocatalyst can't be used for commercialization. This paper summarize mechanism of silicon photocatalyst. In addition, properties and current states of photo catalyst using nanomaterials of silicon are also introduced.

• 한국재료학회지
• /
• 제15권6호
• /
• pp.388-392
• /
• 2005

The $Zr_{57}V_{36}M_7$ getter alloy was prepared by Fe substituting Ga or Y for Fe on $Zr_{57}V_{36}M_7$ getter alloy(St707), and the activation temperatures and the hydrogen a sorption speeds of these alloys were investigated. The activation temperatures of these alloys were estimated from the ultimate pressure-temperature curve and lowered about $100\~200\;K$ compared to $Zr_{57}V_{36}M_7$, fetter alloy(St707). However, final pressures at fully activated temperature were increased with substitution of Fe by Ga and Y on $Zr_{57}V_{36}M_7$ getter alloy. The hydrogen sorption speeds of these alloys measured by an orifice method were decreased about $0.460\~0.586liter/sec$ g compared to $Zr_{57}V_{36}M_7$ getter alloy.