• 멤브레인
• /
• 제29권4호
• /
• pp.231-236
• /
• 2019

본 연구에서는 보습오일 및 천연유화제를 포함한 하이드로젤 비드 및 고강도 하이드로젤 매트릭스로 구성된 알지네이트 기반의 하이드로젤 멤브레인을 제조하고 용출 특성을 평가하였다. 실험 결과, 하이드로젤 비드 및 고강도 하이드로젤의 조성을 조절하여 보습오일 성분의 용출 속도를 원하는 범위로 제어할 수 있음을 확인하였다. 특히 상호 침투 고분자 네트워크 구조를 가지고 있는 고강도 하이드로젤과 하이드로젤 비드를 결합함으로써 멤브레인의 물리적 안정성을 높이고 동시에 보습오일의 용출 속도를 더욱 세밀하게 제어할 수 있음을 확인하였다.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.512-518
• /
• 2023

To address inherent weaknesses such as low mechanical strength and limited enzyme loading capacity in conventional chitosan or alginate beads, an additional step involving the exchange of anionic surfactants with hydroxide ions was employed to prepare porous chitosan hydrogel capsules for enzyme immobilization. Consequently, excellent thermal stability and long-term storage stability were confirmed. Furthermore, coating the porous chitosan hydrogel capsules with polydopamine not only improved mechanical stability but also exhibited remarkable enzyme immobilization efficiency (97.6% for M1-D0.5). Additionally, it was demonstrated that the scope of application for chitosan hydrogel beads, prepared using conventional methods, could be further expanded by introducing an additional step of polydopamine coating. The enzyme immobilization matrix developed in this study can be selectively applied to suit specific purposes and is expected to be utilized as a support for the adsorption or covalent binding of various substances.

• 폴리머
• /
• 제27권2호
• /
• pp.159-166
• /
• 2003

폴리(비닐 알코올) 하이드로젤 입자의 표면에 음이온성을 부여하기 위하여 비닐아세테이트(VAc)와 메타아크릴산(MMA)을 현탁 공중합하였다. $^1$H-NMR을 통해서 공중합된 입자의 표면에 카르복실기가 도입되었음을 확인하였다. poly(VAc-co-MAA) 입자를 알칼리 용액에서 불균일계 비누화를 하였으며, 단독 PVAc 입자 보다 비누화 반응이 빠름을 관찰하였다. 또한 이들 입자를 산성 용액과 알칼리 용액에서 연속적으로 처리하여 입자들의 팽창 정도를 관찰하였다. 비누화된 입자들은 산성 수용액에서는 수축이 되었다가 알칼리 수용액에서는 팽창하는 가역적인 성질을 보였다. 비누화된 입자들은 다량의 수분을 흡수하는 하이드로젤 형태였으며, $^1$H-NMR, FT-IR을 통해서 하이드로젤 표면에 -COOH기가 형성된 것을 확인할 수 있었다.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.133-138
• /
• 2012

Polyvinyl alcohol/alginate hydrogel beads containing Mg-Al layered double hydroxide (LDH-PVA/alginate beads) were synthesized for phosphate removal. Results showed that blending PVA with the LDH-alginate beads significantly improved their stability in a phosphate solution. The kinetic reaction in LDH-PVA/alginate beads reached equilibrium at 12 hr-post reaction with 99.2% removal. The amount of phosphate removed at equilibrium ($q_e$) was determined to be 0.389 mgP/g. The equilibrium data were described well by the Freundlich isotherm with the distribution coefficient ($K_F$, 0.638) and the constant (n, 0.396). Phosphate removal in LDH-PVA/alginate beads was not sensitive to solution pH. Also, the removal capacity of LDH-PVA/alginate beads ($q_e$, 1.543 mgP/g) was two orders of magnitude greater than that of PVA/alginate beads ($q_e$, 0.016 mgP/g) in column experiments. This study demonstrates that LDH-PVA/alginate beads with a higher chemical stability against phosphate compared to LDH-alginate beads have the potential for phosphate removal as adsorptive media.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2016년도 춘계학술논문요약집
• /
• pp.223-224
• /
• 2016

• KSBB Journal
• /
• 제26권5호
• /
• pp.422-426
• /
• 2011

Alginate bead has been supplemented with various polymers to control permeability and to enhance mechanical strength. In this report, fibroin-reinforced alginate hydrogel was prepared, in which spatial localization of fibroin molecules was investigated. Confocal laser scanning microscopy revealed that fibroin molecules formed a fibrous network in the alginate-fibroin beads, which was expected to enhance mechanical strength as same as in many composite materials. Uniaxial compression test showed that fibroin-reinforced alginate beads had increased mechanical strength only after methanol treatment that caused ${\beta}$-sheet formation among fibroin molecules. Simultaneous curing and dialysis of alginate beads were carried out to remove excesscalcium but to retain fibroin in the dialysis chamber, which fabricated beads without internal fibrous fluorescent stains. Fibroin molecules were only found beneath the surface of the beads. The fibroin-diffused shell was further processed to form a thick wall after drying or was mobilizedto the centre of the bead by methanol treatment. Accordingly, the structure analyses provide processing methods of fibroin to form a wall or center clumps, which could be applied to design controlled delivery device.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.139-144
• /
• 2002

Two types of alginate gel beads capable of floating in the gastric cavity were prepared. The first, alginate gell bead containing olive oil(Al-Oil), is a hydrogel bead and its buoyancy is attributable to olive oil held in the alginate gel matrix. The model drug, metronidazole(MZ), contained in Al-Oil was released gradually into artificial gastric fluid. The profiles of MZ release from Al-Oil shown initial burst and after 90 min they were about 100%. The second, alginate gel bead containing curdlan microsphere(Al-C), is a gel bead with curdlan-MZ microsphere in the matrix. To sustained release rate of drug, alginate bead were prepared curdlan microsphere containing MZ. Results demonstrated that sustained delivery of MZ over 2h can be easily achieved while the bead remained float. The release properties of prepared alginate beads are applicable not only for sustained release of drugs but also for targeting the gastric mucosa.

• Archives of Pharmacal Research
• /
• 제19권4호
• /
• pp.280-285
• /
• 1996

The sustained release dosage form which delivers melatonin (MT) in a circadian fashion over 8 h is of clinical value for those who have disordered circadian rhythms because of its short halflife. The purpose of this study was to evaluate the gelling properties and release characteristics of alginate beads varying multivalent cationic species $(Al^{+++}, \; Ba^{++}, \; Ca^{++}, \; Mg^{++}, \; Fe^{+++}, \; Zn^{++})$. The surface morphologies of Ca- and Ba-alginate beads were also studied using scanning electron microscope (SEM). MT, an indole amide pineal hormone was used as a model drug. The $Ca^{++}, \; Ba^{++}, \; Zn^{++}, \; Al^{++}\; and\; Fe^{+++}\; ions\; except\; Mg^{++}$ induced gelling of sodium alginate. The strength of multivalent cationic alginate beads was as follows: $Al^{+++}\llFe^{+++} the induced hydrogel beads were very fragile and less spherical. Fe-alginate beads were also fragile but stronger compared to Al-alginate beads. Ba-alginate beads had a similar gelling strength but was less spherical when compared to Ca-alginate beads. Zn-alginate beads were weaker than Ca- and Ba-alginate beads. Very crude and rough crystals of Ba- and Ca-alginate beads at higher magnifications were observed. However, the type and shape of rough crystals of Ba- and Ca-alginate beads were quite different. No significant differences in release profiles from MT-loaded multivalent cationic alginate beads were observed in the gastric fluid. Most drugs were continuously released upto 80% for 5 h, mainly governed by the passive diffusion without swelling and disintegrating the alginate beads. In the intestinal fluid, there was a significant difference iq the release profiles of MT-loaded multivalent cationic alginate beads. The release rate of Ca-alginate beads was faster when compared to other multivalent cationic alginate beads and was completed for 3 h. Ba-alginate beads had a very long lag time (7 h) and then rapidly released thereafter. MT was continuously released from Feand Zn-alginate beads with initial burstout release. It is assumed that the different release rofiles of multivalent cationic alginate beads resulted from forces of swelling and disintegration of alginate beads in addition to passive diffusion, depending on types of multivalent ions, gelling strength and drug solubility. It was estimated that 0.2M $CaCl_2$ concentration was optimal in terms of trapping efficiency of MT and gelling strength of Ca-alginate beads. In the gastric fluid, Ca-alginate beads gelled at 0.2 M $CaCl_2$ concentration had higher bead strength, resulting in the most retarded release when compared to other concentrations. In the intestinal fluid, the decreased release of Ca-alginate beads prepared at 0.2 M $CaCl_2$ concentration was also observed. However, release profiles of Ca-alginate beads were quite similar regardless of $CaCl_2$ concentration. Either too low or high $CaCl_2$ concentrations may not be useful for gelling and curing of alginate beads. Optimal $CaCl_2$ concentrations must be decided in terms of trapping efficiency and release and profiles of drug followed by curing time and gelling strength of alginate beads.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2741-2746
• /
• 2013

The immobilization of enzyme is one of the key issues both in the field of enzymatic research and industrialization. In this work, we reported a facile method to immobilize Candida Antarctica lipase B (CALB) in alginate carrier. In the presence of calcium cation, the enzyme-alginate suspension could be cross-linked to form beads with porous structure at room temperature, and the enzyme CALB was dispersed in the beads. Activity of the enzyme-alginate composite was verified by enzymatic hydrolysis reaction of p-nitrophenol butyrate in aqueous phase. The effects of reaction parameters such as temperature, pH, embedding and lyophilized time on the reactive behavior were discussed. Reuse cycle experiments for the hydrolysis of p-nitrophenol butyrate demonstrated that activity of the enzyme-alginate composite was maintained without marked deactivation up to 6 repeated cycles.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2384-2393
• /
• 2018

Porous alginate-based hydrogel beads (porous ABH) have been prepared through a facile and sustainable template-assisted method using nano-calcium carbonate and nano-$CaCO_3$ as pore-directing agent for the efficient capture of methylene blue (MB). The materials were characterized by various techniques. The sorption capacities of ABH towards MB were compared with pure sodium alginate (ABH-1:0) in batch and fixed-bed column adsorption studies. The obtained adsorbent (ABH-1:3) has a higher BET surface area and a smaller average pore diameter. The maximum adsorption capacity of ABH-1:3 obtained from Langmuir model was as high as $1,426.0mg\;g^{-1}$. The kinetics strictly followed pseudo-second order rate equation and the adsorption reaction was effectively facilitated, approximately 50 minutes to achieve adsorption equilibrium, which was significantly shorter than that of ABH-1:0. The thermodynamic parameters revealed that the adsorption was spontaneous and exothermic. Thomas model fitted well with the breakthrough curves and could describe the dynamic behavior of the column. More significantly, the uptake capacity of ABH-1:3 was still higher than 75% of the maximum adsorption capacity even after ten cycles, indicating that this novel adsorbent can be a promising adsorptive material for removal of MB from aqueous solution under batch and continuous systems.