• 대한화학회지
• /
• 제23권5호
• /
• pp.307-313
• /
• 1979

N-Aryllsufonylbenzimidoyl chloride를 출발물질로 사용하여 다음과 같은 7가지 새로운 히드라진 유도체들을 합성하였다. ${\beta}-({\alpha}-Benzenesulfonamidobenzal)hydrazine\;(II),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylmethylenehydrazine\;(III),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)phenylhydrazine\;(VII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-4-nitrophenylhydrazine\;(VIII),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-2,4-dinitrophenylhydrazine\;(IX),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)dimethylhydrazine\;(X),\;{\beta}-({\alpha}-Benzenesulfonamidobenzal)-p-methylphenylhydrazine\;(XI)$ 이 유도체들의 구조를 원소분석, ir, nmr, mass 스펙트럼 및 기타 화학적인 방법을 통해서 확인하였다. 일반적으로 이 치환반응은 극성인 용매에서, 그리고 친핵체인 페닐히드라진 유도체에 전자를 끄는기가 있을 때 수득율이 높았다.

• Carbon letters
• /
• 제24권
• /
• pp.1-9
• /
• 2017

We studied the basic properties and fabrication of reduced graphene oxide (rGO) prepared using eco-friendly reduction agents in the graphene solution process. Hydrazine is generally used to reduce graphene oxide (GO), which results in polluting emissions as well as fixed nitrogen functional groups on different defects in the graphene sheets. To replace hydrazine, we developed eco-friendly reduction agents with similar or better reducing properties, and selected of them for further analysis. In this study, GO layers were produced from graphite flakes using a modified Hummer's method, and rGO layers were reduced using hydrazine hydrate, L-ascorbic acid, and gluconic acid. We measured the particle sizes and the dispersion stabilities in the rGO dispersed solvents for the three agents and analyzed the structural, electrical, and optical properties of the rGO films. The results showed that the degree of reduction was in the order L-ascorbic acid ${\geq}$ hydrazine > glucose. GO reduced using L-ascorbic acid had a sheet resistance of $121k{\Omega}/sq$, while that reduced using gluconic acid showed worse electrical properties than the other two reduction agents. Therefore, L-ascorbic acid is the most suitable eco-friendly reduction agent that can be substituted for hydrazine.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 1부
• /
• pp.452-454
• /
• 2012

본 논문에서는 열분해 및 촉매반응의 의한 Hydrazine의 Ammonia 전환율을 연구하였다. 원자력발전소 2차 계통은 물/증기 순환계통으로 기기 및 배관의 부식을 억제하고, 증기발생기(Steam Generator, SG)의 부식생성물 유입을 최소하기 위해 전휘발성처리법(All Volatile Treatment, AVT)을 적용하여 계통수의 pH를 약염기성으로 유지하고 있다. 또한 Hydrazine을 이용하여 계통수의 용존산소제거 및 환원성 분위기를 유지하고 있다. 현재 사용되는 AVT는 대부분 단일 아민(Ammine)으로 계통 전 영역에서 pHt를 약염기성으로 유지하기 어렵다. 따라서 복합 아민을 이용하여 단일 아민의 상호단점을 보완한 수처리법을 적용해야한다. 하지만 복합 아민을 적용할 경우 추가 아민 주입설비, 설치부지, 시설유지보수 및 관리가 요구되므로 기존 주입약품을 이용하여 아민을 공급할 수 있는 연구가 필요하다. 따라서 본 연구에서는 Hydrazine의 열분해 및 촉매반응을 이용한 Ammonia 전환율을 조사하였다.

• Journal of Electrochemical Science and Technology
• /
• 제7권4호
• /
• pp.277-285
• /
• 2016

There is a growing demand for simple, cost-effective, and accurate analytical tools to determine the concentrations of biological and environmental compounds. In this study, a stable electroactive thin film of cobalt hexacyanoferrate (Cohcf) was prepared as an in situ chemical precipitant using electrostatic adsorption of $Co^{2+}$ on a silicate sol-gel matrix (SSG)-modified indium tin oxide electrode pre-adsorbed with $[Fe(CN)_6]^{3-}$ ions. The modified electrode was characterized by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and electrochemical techniques. Electrocatalytic oxidation of hydrazine on the modified electrode was studied. An electrochemical sensor for hydrazine was constructed on the SSG-Cohcf-modified electrode. The oxidation peak currents showed a linear relationship with the hydrazine concentration. This study provides insight into the in situ growth and stability behavior of Cohcf nanostructures and has implications for the design and development of advanced electrode materials for fuel cells and sensor applications.

• 한국표면공학회지
• /
• 제36권5호
• /
• pp.393-397
• /
• 2003

The effects of the composition and additives on the blackening and deposition rate of electroless Ni-Zn plating have been examined. Hydrazine resulted in lower sheet resistance of the deposit than sodium hypophosphite. Zinc concentration more than 15 wt% and small amount of ammonium sulfate in the deposits were needed in obtaining Ni-Zn deposit with a black color. An optimum condition was obtained for the black Ni-Zn deposit at an appreciable deposition rate.

• Archives of Pharmacal Research
• /
• 제16권2호
• /
• pp.94-98
• /
• 1993

Various hydrazines such as aryl-, carbonyl-, and sulfonyl-hydrazine were reacted with dinitrogen tetroxide to give the corresponding azides in excellent yields under mild ocnditions at low temperature $(-20-40^\circ{C)}$ in acetonitrile. The reaction appears to be initiated by formation of the .betha.-nitroso hydrazine intermediate which converts into the azide product.

• 센서학회지
• /
• 제16권1호
• /
• pp.11-16
• /
• 2007

CuO is an important transition metal oxide with many practical applications such as catalysts, p-type semiconductor, solar cells, magnetic storage media and cathode materials. In this contribution, nanocrystalline CuO powders were prepared by solution reduction method using copper chloride ($CuCl_{2}{\cdot}2H_{2}O$), hydrazine ($N_{2}H_{4}$) and NaOH and subsequent heat treatment. The gas sensor using nanocrystalline CuO powders showed high sensitivities to acetone and ethanol.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.26-34
• /
• 1989

The selective chemical degradation or etching of PET based on an organic amine attack on the ester group. The techniques involves the chemical removal of loss ordered amorphous regions or crystalline regions, which are essentially unaffected by the degradative etchant. Thus, most of previous studies have limited to consideration which has been given to structural changes taking place. Therefore, this study was carried out to investigate surface characterization, dyeing properties of PET film hydrazinolyzed with hydrazine hydrate in methanol. PET film was treated with 30% hydrazine hydrate in methanol at $30^\circ{C}$ for various time intervals. The total surface tension of treated PET increased, the dispersion force decreased and the hydrogen bonding force increased. The equilibrium dye adsorption, dyeing rate and apparent diffusion coefficient of acid dyes increased, and the apparent activation energies of diffusion decreased.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.541-547
• /
• 1999

Corrosion control, in the end-shield cooling system of Wolsung Nuclear Power Plant, is directly related to the control of dissolved oxygen (DO). The current method, being used to deoxygenate the end-shield cooling water, is a chemical treatment by addition of reducing agent, hydrazine, to react with DO. This method has several limitations including high reaction temperature of hydrazine , unwanted explosive hydrogen gas production, and its intrinsic harmful property. A new approach to remove DO using a membrane-based oxygen removal system (MORS) was tried to overcome limitations of the hydrazine treatment. The DO removal efficiency of the MORS was found to be in the range 87% to 98%: The higher vacuum, the lower water flow rate and the higher water temperature tend to increase the DO removal efficiency.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.497-501
• /
• 2000

One of the way to derive design parameters of the fuel feeding system in satellite is to analyze unsteady flow of liquid propellant (hydrazine) in the propulsion system. During steady thruster firing the flow rate is constant: if a thruster valve is abruptly shut down among a sets of thrusters, pressure spikes much higher than the initial tank pressure occur. This renders the fuel flow unsteady, and the fluid pressure and flow rate to oscillate. If the pressure spikes are high enough, there are possibilities that propellant explosively decomposes, thruster valves are damaged, and adiabatic detonation of the hydrazine propellant is potentially incurred. Reflected shockwaves could also affect the calibration and operation of the pressure transducers. These necessitate the analysis of unsteady flow in the propulsion system design, and the calculation results obtained through some governing parameter variation are presented in this work.