• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.1818-1822
• /
• 2008

여수로와 같은 3차원 수리구조물을 설계하고 수리현상을 조사하거나, 형상 및 안정성을 파악하기 위해서는 일반적으로 수리모형실험을 통하여 실제 현상을 모의하는 경우가 많다. 그러나 수리모형실험을 하기 위해서는 많은 시간과 비용 및 공간이 필요하며 실제 수리구조물을 축소시켜 측정하는 것은 대단히 어렵고 표면장력 등이 실험결과에도 상당한 영향을 미칠 수 있으며 다양한 경우의 실험은 현실적으로 불가능하다. 따라서, 수치해석을 통하여 적정한 초기결과를 도출할 필요성이 있으며, 이를 통하여 수리모형실험의 대상을 결정하고 결과를 비교한다면 경제적이고 합리적인 수리구조물의 설계와 평가가 가능하다. 본 연구에서는 최적의 여수로를 설계하기 위하여 월류형 여수로를 대상으로 수치해석을 수행하였고, 수리모형실험에 대한 실험적인 접근을 통하여 수리적 조건을 향상시킬 수 있는 보다 나은 설계안을 제시하였다. 이러한 수리모형실험 계측결과를 통하여 개선된 수리구조물 설계안을 제안하였고, 개선된 설계안에 대한 개선효과를 조사하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.758-763
• /
• 2006

Statistical concepts and methods are routinely utilized in a number of design and management problems in engineering hydrology. This is because most of hydrological processes have some degree of randomness and uncertainty. Thus, the concepts of risk and uncertainty are commonly utilized for designing and evaluating hydraulic structures such as spillways and dikes. Therefore, in this study, uncertainty analysis considering the variance of design floods is performed to evaluate the uncertainty of the hydrologic risk of flood related hydraulic structures using frequency analysis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.830-833
• /
• 2004

Hydraulic structures have been constructed with low cost concrete so as to increase the investment efficiency. But, it has caused to produce structures having excess internal voids inside concrete. As the construction of agricultural irrigation and drainage project is concentrated on off-farming season and scattered in wider area, variation of quality of structures is big and it caused increase of internal voids. Due to that reason, hazardous substance is passing rather freely through the voids causing occur of crack and accordingly life time of structures is getting shortened. It is necessary to make a thesis of design criteria for design strength to increase life time, range of variation of quality, strength of ready-mixed concrete proper to design strength, and water-cement ratio and air content.

• 한국지진공학회논문집
• /
• 제2권3호
• /
• pp.51-60
• /
• 1998

Base isolation is an innovative design strategy that provides a practical alternative for the seismic design of structures. Base isolators, mainly employed to isolate large structures subjected to earthquake ground excitations and to rehabilitate structures damaged by past earthquakes, deflect and absorb the seismic energy horizontally transmitted to the structures. This study demonstrated that the base isolation system may offer effective performance for bridges during severe seismic events through shaking table tests. Two base isolation systems using laminated rubber bearings with and without hydraulic dampers are tested. The test results strongly show that the laminate rubber bearings cause the natural period of the bridge structure increased considerably, which results in the deck acceleration and the shear forces on the deck acceleratino and the shear forces on the piers reduced significantly. The results also demonstrate that the hydraulic dampers enhance the system's capacity in dissipating energy to reduce the relative displacement between the bridge deck and the pier.

• Structural Engineering and Mechanics
• /
• 제54권1호
• /
• pp.121-133
• /
• 2015

The aluminum dome has been widely used in natatorium, oil storage tank, power plant, coal, as well as other industrial buildings and structures. However, few research has focused on the structural behavior and design method of this dome. At present, most designs of aluminum alloy domes have referred to theories and methods of steel spatial structures. However, aluminum domes and steel domes have many differences, such as elasticity moduli, roof structures, and joint rigidities, which make the design and analysis method of steel spatial structures not fully suitable for aluminum alloy dome structures. In this study, a stability analysis method, which can consider structural imperfection, member initial curvature, semi-rigid joint, and skin effect, was presented and used to study the stability behavior of aluminum dome structures. In addition, some meaningful conclusions were obtained, which could be used in future designs and analyses of aluminum domes.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.34-39
• /
• 2005

All of the design criterion are not only formulated by an internal study, concerning the design of maritime structures, but also by the guarantee that internal design technology is essential, at least according to theoretical and experimental studies. Furthermore, the basic data, which is necessary for the development of a more stable design of breakwater structures, should be ensured, according to current research and analysis of damage created by water waves. According to the necessity to solve the problems that occur in the design and construction of ocean structures, until now, it is recognized that the hydraulic experiments are important. This paper provides the design of structures to decrease the energy created by waves. Suggestions to make contributions to the development of ocean/fisheries technology are also discussed. It is better to use S-type coastal structures/breakwaters than to use uniform type breakwaters, concerning stability, reflection, and overtopping.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.144-153
• /
• 1998

Base isolation is an innovative design strategy that provides a practical alternative for the seismic design of structures. Base isolators, mainly employed to isolate large structures subjected to earthquake ground excitations and to rehabilitate structures damaged by past earthquakes, deflect and absorb the seismic energy horizontally transmitted to the structures. This study demonstrates that the base isolation system may offer effective performance for bridges during severe seismic events through shaking table tests. Two base isolation system using laminated rubber bearings with and without hydraulic dampers are tested. The test results strongly show that the laminated rubber bearings cause the natural period of the bridge structure increased considerably, which results in the deck acceleration and the shear forces on the piers reduced significantly. The results also demonstrate that the hydraulic dampers enhance the system's capacity in dissipating energy to reduce the relative displacement between the bridge deck and the pier.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1313-1317
• /
• 2006

In this study, various hydraulic phenomena were analyzed from the dam model experiments and the analyzed results were compared with existing computation results. Sungduk dam model structures were constructed using Froude similarity law by 1:50 scale. From the measurements of hydraulic phenomena at spillway channel, an improvement method was trying to be suggested over shortcoming of existing design plan. The result of model experiment showed no big difference with that of each part's numerical interpretation. Sidewall overflows were observed, as water conveyance occurred due to the linear characteristics of spillways, which raised the necessity for improving the linear forms of spillways. Also, it was judged to be necessary improving load pressure and establishing protective structures at the riverbed grounds of downstream channels.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.191-194
• /
• 2008

Labyrinth weir is a hydraulic structure that can maintain constant water depth and increase overflow rate by increasing overflow width of weir through complicated displacement of its cross section. The labyrinth weir can be widely applied to various hydraulic facilities such as dam spillway, irrigation facilities, and canal structures. To date, however, few labyrinth weirs were applied to hydraulic facilities in Korea. Hence, in-depth research on labyrinth weir is highly required to efficiently apply the labyrinth weir to hydraulic facilities. This study was performed to analyze the hydraulic characteristics according to triangle labyrinth weir using hydraulic model experiments. The hydraulic characteristics provided in this study, which make it feasible to increase the overflow rate, and are expected to be widely applied to design of hydraulic facilities such as dam spillway and irrigation system.

• Structural Engineering and Mechanics
• /
• 제29권1호
• /
• pp.1-16
• /
• 2008

Tunnels are generally constructed below the ground water table, which produces a long-term interaction between the tunnel lining and the surrounding geo-materials. Thus, in conjunction with tunnel design, the presence of water may require a number of considerations such as: leakage and water load. It has been reported that deterioration of a drainage system of tunnels is one of the main factors governing the long-term hydraulic and structural lining-ground interaction. Therefore, the design procedure of an underwater tunnel should address any detrimental effects associated with this interaction. In this paper an attempt to identify the coupled structural and hydraulic interaction between the lining and the ground was made using a numerical method. A main concern was given to local hindrance of flow into tunnels. Six cases of local deterioration of a drainage system were considered to investigate the effects of deterioration on tunnels. It is revealed that hindrance of flow increased pore-water pressure on the deteriorated areas, and caused detrimental effects on the lining structures. The analysis results were compared with those from fully permeable and impermeable linings.