• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.345-348
• /
• 2005

This paper presents the result of adiabetic temperature rise and fundamental properties of concrete combining admixtures. According to results, difference of setting time with I5.5hours is observed between S-P and R-F30 mixture. Based on the adiabetic temperature rise test, 8$^{circ}C$of heat producted occurs between E-P and R-F30 mixture. is applied to estimate the temperature rising under adiabetic curing condition, which exhibits closer consistency with tested value. The function mentioned above can account for the effect of dormant period in hydration process at early stage on hydration heat production. It reveals that the consideration of placing layer based on the mixture adjustment(E-P mixture at top layer and R-F30 mixture at bottom layer) in mass concreting will contribute to reduce hydration heat as well as alleviate tensile stress discrepancy between placing layer.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.915-918
• /
• 2008

수화열 및 자기수축은 동일한 수화반응에 의해 필연적으로 발생되는 현상으로서 여러 연구자들에의해 수화온도와 자기수축의 깊은 상관성은 언급되어 왔으나, 아직까지 수화온도와 자기수축의 구체적인 관계에 대한 연구보고는 거의 없는 실정이다. 이에 본 연구에서는 시험체의 단면크기를 달리하여 초기 수화발열 및 자기수축의 특성을 구체적으로 분석한 후, 내부 수화온도와 자기수축의 상관성을 검토하였다. 그 결과, 시험체 단면이 증가할수록 전체적인 내부온도와 자기수축은 증가하였으며, 수화발열상승구간 및 자기수축증가구간에서 발생하는 수화온도 상승량 및 상승률, 자기수축 증가량 및 증가율은 증가하였다. 수화발열상승속도 및 자기수축증가속도가 증가할수록 구간에서 발생하는 수화온도상승량과 자기수축증가량은 증가한 반면, 수화온도상승률과 자기수축증가율은 유사하게 나타났으며, 수화발열상승 속도가 증가할수록 자기수축증가구간의 자기수축증가량과 자기수축증가속도는 증가하였다.

• 한국건축시공학회지
• /
• 제20권1호
• /
• pp.11-18
• /
• 2020

탄소나노튜브는 우수한 역학성, 전기전도성 등으로 다양한 산업에 이용되고 있다. 건설산업에서는 구조체에 자기센싱 기능을 부여하는 연구가 진행되고 있지만, 연구자들마다 실험결과가 상이하게 나타나고 이에 대한 분석은 미비한 실정이다. 따라서 본 연구에서는 MWCNT가 첨가된 시멘트페이스트의 수화열, 공극률, 리트벨트 정량분석법, 압축강도, 거리에 따른 전기저항값을 측정하여 수화와 강도특성 및 전기특성을 분석하였다. 실험결과 수화열은 MWCNT가 증가할수록 감소되는 것으로 나타났다. 또한 XRD 리트벨트 정량분석법 결과 MWCNT 첨가율 증가에 따른 수화생성물의 양은 큰 차이가 없는 것으로 나타났고, 압축강도 저하의 원은은 공극률 분석결과 MWCNT가 시멘트페이스트내에서 공극의 양을 증가시겼기 때문으로 판단되며 SEM분석결과 MWCNT가 반데르발스힘에 의해 뭉쳐져 있어서 이 부위가 공극 및 취약부로 발생것으로 판단된다. 전기저항값은 첨가율이 증가될수록 감소하여 추후 자기센싱에 대한 역할을 할 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제55권3호
• /
• pp.224-229
• /
• 2018

OPC production requires high calorific value and emits a large amount of $CO_2$ through decarbonation of limestone, accounting for about 7% of $CO_2$ emissions. To reduce $CO_2$ emissions during the Ordinary Portland Cement (OPC) production process, there is a method of reducing the consumption of cement or lower temperature calcination for OPC product. In this study, for energy consumption reduction, we prepared Hauyne-belite cement by calcination at a low temperature compared to that used for OPC and studied the early hydration properties of the synthesized Hauyne-belite cement. We set the ratios of Hauyne and belite to 8 : 2, 5 : 5 and 3 : 7. For the hydration properties of the synthesized Hauyne-belite cement, we tested heat of hydration of paste and the compressive strength of mortar, using XRD and SEM for analysis of hydrates. As for our results, the temperature for optimum synthesis of Hauyne-belite is $1,250^{\circ}C$. Compressive strength of synthesized Hauyne-belite cement is lower than that of OPC, but it is confirmed that compressive strength of synthesized Hauyne-belite cement with mixing in of some other materials can be similar to that of OPC.

• Computers and Concrete
• /
• 제10권5호
• /
• pp.523-539
• /
• 2012

Silica fume has long been used as a mineral admixture to improve the durability and produce high strength and high performance concrete. And in marine and coastal environments, penetration of chloride ions is one of the main mechanisms causing concrete reinforcement corrosion. In this paper, we proposed a numerical procedure to predict the chloride diffusion in a hydrating silica fume blended concrete. This numerical procedure includes two parts: a hydration model and a chloride diffusion model. The hydration model starts with mix proportions of silica fume blended concrete and considers Portland cement hydration and silica fume reaction respectively. By using the hydration model, the evolution of properties of silica fume blended concrete is predicted as a function of curing age and these properties are adopted as input parameters for the chloride penetration model. Furthermore, based on the modeling of physicochemical processes of diffusion of chloride ion into concrete, the chloride distribution in silica fume blended concrete is evaluated. The prediction results agree well with experiment results of chloride ion concentrations in the hydrating concrete incorporating silica fume.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1231-1239
• /
• 1994

In this study, gel powder which had relatively high hydration reactivity in CaO and P2O5 rich composition of CaO-P2O5-SiO2-H2O system was prepared by sol-gel process and its hydrated specimen was manufactured. The it was investigated to appropriate calcination temperature in sol-gel process which hydrated specimen of gel powder have proven to strength and the effect of factors influenced strength in hydration process. The major product of before and after hydration reaction was hydroxyapatite, and crystalline phase of C-S-H was already formed during gelation process. After hydration reaction of pressed specimen, crystalline phase of C-S-P-H was formed. It was hydrated product of silicocarnotite (5CaO.P2O5.SiO2). Gel phases of C-S-H and C-S-P-H occured as a result of partial substitution of amorphous silica by P2O5 was formed. The strength of hydrated hardened body is developed by strong bonding and bridging between the gel phases of C-S-H or C-S-P-H and the crystalline products such as hydroxyapatite, Ca(OH)2 C-S-H and C-S-P-H. In addition, the ultrafine gel powder have an great effect on increase of hydration reaction.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.65-72
• /
• 2008

This work evaluated the extractability of tobacco stem biomass for the papermaking type Reconstituted Tobacco Sheet(RTS). The effects of the soaking conditions on the hydration of stem biomass and the effects of the hydrated state on the mechanical extraction were investigated. In order to simulate the mechanical expression process of a papermaking type RTS mill, for example, the screw press process, the novel mechanical pressing analyzer was developed for this study. The hydration of stem biomass by soaking process was greatly affected by the soaking time and the soaking temperature. The longer soaking time and the higher soaking temperature resulted in the higher hydrated stem biomass. Since the higher hydrated stem had more combined water in the inner structure and resulted in the more flexible structure, the higher hydrated stem leaded to the more compressed filter cake and the higher water contents in the filter cake after the mechanical pressing. The pilot pulping experiments showed the difference in hydration and extractability between burley and bright tobacco stem. The bulkier structure of the burley stem resulted in the faster hydration by pilot pulping and leaded to the larger reduction in water soluble components. And the hydration process showed the major influence on the separation efficiency of water soluble components.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.67-71
• /
• 2003

This study is for the great quantity use of fly-ash. For the producing of high volume concrete from the use of fly-ash, the method of replacement between bonding agents and fine aggregate by fly-ash at the same time was used. It was used that the adiabatic temperature rise of concrete about the mass member which bad been produced by the method that was mentioned before, and the hydration heat of the core test pieces in concrete was measured. Also the core test pieces which were replaced with fly-ash was studied by the compressive streneth's comparison between standard care test pieces and core test pieces. In the case of mass test pieces, hydration heat and the tine to reach the highest temperature were decreased by an increase in replaced fly-ash's amounts of concrete. In addition, among the test pieces having the same amounts of concrete, the test pieces having more replaced amounts of fly-ash's fine aggregate showed higher hydration heat and the increased time to reach the highest temperature. Compressive strength was also increased by hydration heat's decrease according to fly-ash replacement. Replacement of fly-ash was more effective in high temperature environment.

• 한국식품조리과학회지
• /
• 제7권2호
• /
• pp.25-40
• /
• 1991

Five-brown-rice-variety, Akibare, Odaebyeo, Taebaegbyeo, Nonglim Na 1 and Hankangchalbyeo, was prepared and examinated the hydration kinetics and the cooking qualities. Before the hydration the L/W ratio of raw Taebaegbyeo was the biggest value among the five brown rices. The water uptake was directly proportional to the square root of soaking time. During the hydration water uptake of high yielding brown rices was bigger than those of traditional brown rices among the nonglutenious varieties but waxy brown rices were not. Generally volume increase constant was directly proportional to the water uptake constant, which were different a little with brown rices was hydrated which was inversed proportional to the water uptake degree. According to the instrumental result using the rheometer of cooked brown rice with increased soaking times that was decreased the hardness and was increased the adhesiveness. The sensory evaluation test indicated that the hardness and the stickiness value of cooked brown rices were proper after 15-hour-soaking time and it was identical result to the instrumental result using the rheometer.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.539-546
• /
• 1999

Absorbent polymer-cement composites were fabricated by the semi-powder mixing OPC(ordinary Portland cement) with an absorbent polymer. The effects of absorbent polymer on the mechanical properties and the hydration characteristics were observed and the polymer-cement interaction also discussed. Absorbent polymer-cement composites showed the value of total porosity of 8vol% the value of 28 days flexural strength was up to 280 Kgf/cm2 in the case of absorbent polymer-cement composite at 1 wt% absorbent polymer content and microstructure of absorbent polymer-cement composite has been observed more dense than that of OPC paste. Accordingly the permeability of compositewas improved and so the moisture resistance was also increased. Adding polymer did not retard the hydration of OPC. It was considered from the results of IR(infrared) analysis that the functional group of absorbent polymer would be changed from unidentate to bidentate during by the hydration of cement minerals.