• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.820-826
• /
• 2013

In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2020

The main purpose of the research is to prevent residents who are using underground parking lot from being exposed to pollusion, and to allow them to enjoy clean indoor environment. The study subject for the research are underground parking lots in 20 different apartments, 4 of them were constructed before 2000, 10 were constructed from 2000-2010, and the rest were constructed after 2010. By analyzing the air quality in these underground parking lots, we found out that O3, NO2, CO, PM10, Radon in all parking lots were not excessive compared to the standard limit. TVOC rate was measured with the value in between 312 ~ 2,137㎍/m3, with CO2 value in between 193~1,824 ppm, and HCHO with the value in between 0.01~1.52ppm. The lightning system in underground parking lots in apartments constructed before 2000 were using manual light control system, while automatic light control system was used in all apartments constructed after 2000, and the brightness of parking lots in apartments constructed before 2000 was quite low. The apartments constructed after 2000 are performing cleaning and ventilation due to management agreement, while the apartments constructed before 2000 are not performing regular cleaning and there was no mechanical ventilation system installed. The difference of indoor air quality was significant seasonally, daily, and yearly (year of construction), while illuminance was significantly different yearly.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.27-34
• /
• 2011

This study is making a product for the development of one process worm wheel of making a shape for gear for worm wheel without hobbing manufacturing process. Because of removing a hobbing process, plastic worm wheel for increased productivity and equivalent quality is produced in the result. As the result, this product is selling to Hyundai Mobis, Mando, TRW, KOYO/NSK/Showa(Japan), Delphai(America). The core technology and different strategy are as follows. The technology protection for molding of worm whee is currently patent process "Molding process of helical gear(No. 10-2008-0105908). Further patent procedure for "molding system for positioning decision of inserting boss is currently prepared. As gear molding procedure in hobbing machine without gear machining procedure, most of all, core development technology which is making a gear tooth is main topic. So that, in case of currently developed worm wheel, because core and mold base are not developed in the first procedure, gear is machining in hobbing M/C as the second procedure. In the later, patent for mold base structure will be prepared in this study results.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.129-140
• /
• 2018

In this study, we analyzed the electric vehicle (EV) purchasing behavior with market segmentation in Seoul using the binary logit model. For the model estimation, the experimental design of SP survey generated 24 scenarios with purchase price, charging station availability, and driving range of EVs. The results of market segmentation analysis indicated that the owners of subcompact and compact size cars were primarily affected by the purchasing price while those of mid and full size cars were more sensitive to the charging station availability. By housing type, the charging station availability was the most important factor for the residents of apartment while the purchase price was the most important factor to choose the EVs. These results presented that the EV supply strategy of the automobile manufacturer should be diversified according to the marketing target and the expansion of the public charging infrastructure should be the top priority in the government policy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.100-108
• /
• 2010

The axial strength of existing RC columns were experimentally investigated in this paper to understand the strength characteristics of existing structural members and to get a appropriate data in strengthening design of RC members in a remodelling construction. Ten RC columns were prepared by being cut and extracted directly from the demolition site of the apartment housings. Each column was tested under uniaxial loadings with different eccentricities in order to evaluate the axial strength of existing RC columns. From the test results, it was found that axial strength of all the specimens were at least 75% higher than those of the theoretical values required by current code. But member displacement ductility ratio were relatively low ranging from 2.12~5.86.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.421-426
• /
• 2008

In case of the large-scaled indoor gymnasium that has been constructed in the local area, there are many instances for the use as multipurpose space where the public performances are possible such as leisure activity, lecture, assembling activity, drama, concert and so on for the resident together with the purpose of sporting facility. In order for utilization to the maximum of the function of such indoor gymnasium, the acoustic capabilities concerned with Definition of both Voice and Music are simultaneously required. However, in case of the large-scaled athletic facility, since it was designed with high ceiling-height in view of its characteristics, it forms a Sound Focus and then the sound is concentrating to the specific part, and because the vibration of sound is too loud due to its broad volume, the acoustic defects such as many Echoes are arising. On such viewpoint, based on the drawing of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province, this Study has proposed such indoor gymnasium equipped with the optimized acoustic condition passing through Acoustic Simulation Phase. As the result of Acoustic Simulation, we could design the indoor gymnasium that equipped with really satisfying acoustic performance 'after' reformation compared with 'before' reformation, and it is considering that such material could be utilized as the fundamental material that brings a curtailment effect of the construction cost and also enables us to improve the acoustic performance, at the stage of planning and designing for the similar sporting facility in the future.

• International Journal of Human Ecology
• /
• v.9 no.2
• /
• pp.107-116
• /
• 2008

A new movement in forming community villages for better living standards is becoming popular. In order to sustain a proper community, it is essential to design proper community programs and facilities, which can encourage the proactive participation of residents. In this study, detailed aspects of the Mindlre (Dandelion) community (including formation process and management of the village) are investigated. The Mindlre community is a successful community village in Korea concerned with residents' participation and community activities. The community is located in Sancheong, Gyungsangnamdo province in Korea. The study methods are references, field trips, and interviews with residents. Six areas were surveyed and investigated: the physical environment of the Mindlre community and eco-friendly elements, respondents' background and the motivation to join, residents composition, residents' participation in the formation process of the community, self-management systems and common activities, and residents's life satisfaction. The mindlre Community was founded on Christian religions faith. The primary idea of this village was building a new hope for rural areas without discrimination. The size of the village was expanded with housing for teachers and students who were linked with the Mindlre School (substitution school). When the community was founded, existing shapes of the village were preserved. The village was physically renovated based on the original environment, in addition nature friendly materials and methods were used. The residents were proactively involved in the community through regular meetings, self-regulation, and community worship. Although the survey results should that most residents were highly satisfied with living standards, there seemed to be no clear division between community facilities and private houses. A systematic and detailed space planning technique was required. In addition, various community facilities are required due to the expansion of the community.

• Geotechnical Engineering
• /
• v.5 no.4
• /
• pp.5-16
• /
• 1989

This paper statistically analyses the freezing soil by frost group and frost depth in Korea with data from soil testing in the Korea National Housing Corporation, the climate data provided by the Central Weather Office and the data on the frost depth from the National Construction Laboratory Institute. In this paper, freezing variable are analysed such as percentage finer than 0.02 m by weight, plasticity index, freezing index, water contents of soil and frost depth etc‥‥ The result of the analysis is as follows. 1) The frost depth of Korea depends on the properties of soil rather thank the characte fistic of area. 2) The distribution map of design freezing index in 57 cities is drawn up with the maxi- mum freezing index, during past 14 years, calculated by the average of the air temperature observed four times(03 : 00.09 00, 15 : 00, 21 : 00) a day. 3) By correcting the OLS line estimated from the relationship between freezing index and frost depth, a method of utlizing the line with the upper confidence limit of 99.9% int-distribution as predicted maximum frost depth is newly introduced.

• Hwankyungkyoyuk
• /
• v.18 no.3 s.28
• /
• pp.75-90
• /
• 2005

The purpose of this study was to analyze middle school students' consumption lifestyle and develop a program for measuring Ecological Footprint (EF) for them. For this study, 200 male and female middle school students in large cities, medium & small cities were selected to analyze their consumption lifestyle. It was also that the existing programs for measuring EF were studied and basic rules of setting up new EF indicators were established based on the results of survey and literature study. 15 indexes was selected by dividing the life areas into food, housing, traffic, goods and services areas and than the delpi computer programming tools was used to develop program for measuring EF in this study. The program for measuring EF can be used as educational materials for consumers' environment education in the areas of social environment education and school environment education. The followings are suggestions coming out of this study. First, it is required to revise and complement program for measuring EF analyzing the problems that occur when applying it to middle school students actually. Second, some data that used during normalization of EF ate originally from the USA. So it is necessary to change the data to meet the Korean situation. Third, it is necessary to have design work that can invite interests of students with consumers' environmental education materials through cooperation between environmental education experts and computer programmers. Fourth, it is necessary to have practical research with consumers' environmental education adding educational contents into EF measurement program. Fifth, it is necessary to develop a method for distribution an expansion of the program for measuring EF to make it usable in different types of environmental education materials.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.910-912
• /
• 2015

In this paper, we designed the novel capacitive sensor and system for measuring the position of the piston in hydraulic cylinder. The magnetic or LVDT sensors have been widely used to measure the position of the piston because of its high accuracy, but these types of sensor are very expensive and have difficulty in use because of its complexity. To overcome these disadvantages, we studied the optimized non-contact capacitive sensor and designed detecting system for accurate measuring the location of piston in hydraulic cylinder. The proposed capacitive sensor and detecting system have the possibility of practical use for hydraulic cylinder through experiments.