• Journal of Korean Society of Rural Planning
• /
• v.26 no.4
• /
• pp.53-65
• /
• 2020

This study aimed to provide a basic information for managing the water quality of national and regional 1st rivers in Gyeongnam by analyzing the emerging hot spot patterns in BOD, T-P, and TOC, and by grouping the changing trends into clusters. The emerging hot spot analysis for each water quality item was implemented in ArcGIS Desktop with monthly water quality data from 96 water environmental monitoring stations in Gyeongnam, and then four patterns of water quality change were classified by the K-mean cluster analysis. As for BOD, persistent cold spot pattern covered about 42.9% of target rivers, and T-P concentration tended to be low or be getting lower at over 70% of target rivers. While, for TOC, about 70% of target rivers resulted in oscillating hot spots. In addition, the cluster analysis showed that the downstream of Nakdong river had the top priority in terms of water quality management because of the increasing concentration for all the three water quality.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.115-127
• /
• 2018

This study aims to propose management strategies of ventilation paths for improving urban thermal environments. For this purpose, Gimhae-si in Gyeongsangnamdo was selected as a study area. We analyzed hot spots and cool spots in Gimhae by using Landsat 8 satellite image data and spatial statistical analysis, and finally derived the vulnerable areas to thermal environment. In addition, the characteristics of ventilation paths including wind direction and wind speed were analyzed by using data of the wind resource map provided by Korea Meteorological Administration. As a result, it was found that a lot of hot spots were similar to those with weak wind such as Jinyoung-eup, Jillye-myeon, Juchon-myeon and the downtown area. Based on the analysis, management strategies of ventilation paths in Gimhye were presented as follows. Jinyoung-eup and Jillye-myeon with hot spot areas and week wind areas have a strong possibility that hot spot areas will be extended and strengthened, because industrial areas are being built. Hence, climate-friendly urban and architectural plans considering ventilation paths is required in these areas. In Juchon-myeon, where industrial complexes and agricultural complexes are located, climate-friendly plans are also required because high-rise apartment complexes and an urban development zone are planned, which may induce worse thermal environment in the future. It is expected that a planning of securing and enlarging ventilation paths will be established for climate-friendly urban management. and further the results will be utilized in urban renewal and environmental planning as well as urban basic plans. In addition, we expect that the results can be applied as basic data for climate change adaptation plan and the evaluation system for climate-friendly urban development of Gimhye.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.7-16
• /
• 1997

The constituents of deposits on paper machine and holes/spots in paper have been studied by consequently a combination of analytical techniques, such as FTIR, Py-GC-MS, and. EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as preliminary analysis technique. The analysis of organic components were carried out with the use of a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analysed by SEM equipped with an EDS analyzer after pyrolysis at 59$0^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic contents of fatty acid ester and starch, and the inorganic contents of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable AKD and CaCO$_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP that were streamed out from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streak on coating.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.135-140
• /
• 1998

The constituents of deposits on paper machine and holes/spots in paper have been analyzed by a combination of analytical techniques, such as FTIR, Py-GC-MS, and EDS. FTIR spectroscopy was used prior to Py-GC-MS and EDS analysis, as a preliminary analysis. The analysis of organic components was carried out with a pyrolysis unit connected to a GC-MS, and inorganic components in ash were analyzed by SEM equipped with an EDS analyzer after pyrolysis at $590^{\circ}C$. The deposits on the dryer section were complex pitch, which was the mixture of the organic components of fatty acid ester and starch, and the inorganic components of talc, clay, and calcium carbonate. The complex pitch was estimated to come from the coated broke. We knew the deposits on the metering rod of sym-sizer were associated with the interaction of unstable alkyl keten dimer(AKD) and $CaCO_3$. The compositions of holes or spots varied considerably and were associated with chemical interaction within the system. The holes, spots, and blotches in the finished paper were PE and PP from pulp sources, complex pitch that were caused by the interaction of the different additives in the system, polymer such as flexible PVC that was used for the prop of palette, and hot melt as adhesives that came from the inadequate handling of broke. In addition, we identified that poly(caprolactam) which is used for forming fabrics or press felts, could be mixed with the raw materials by accident and results in streaks on coating.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.498-507
• /
• 2004

The fast and Precise service for the users request is the most important in the World Wide Web. However, the lest service is difficult due to the rapid increase of the Internet users recently. The Shared Web Caching (SWC) is one of the methods solving this problem. The performance of SWC is highly depend on the hit rate and the hit rate is effected by the memory size, processing speed of the server, load balancing and so on. The conventional load balancing is usually based on the state history of system, but the prediction of the state of the system can be used for the load balancing that will further improve the hit rate. In this study, a Hot Spot Prediction Method (HSPM) has been suggested to improve the throughputs of the proxy. The predicted hot spots, which is the item most frequently requested, should be predicted beforehand. The result show that the suggested method is better than the consistent hashing in the point of the load balancing and the hit rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.425-431
• /
• 2011

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

• Management Science and Financial Engineering
• /
• v.12 no.1
• /
• pp.127-142
• /
• 2006

In this paper, we present a frequency reassignment problem (FRP) that arises when we add new base stations to resolve hot-spots or to expand the coverage of a code division multiple access (CDMA) network. For this problem, we develop an integer programming (IP) model along with some valid inequalities and preprocessing rules. Also, we develop an effective heuristic procedure that solves two sub-problems induced from the original problem in repetition. Computational results show that the proposed heuristic procedure finds a feasible solution of good quality within reasonable computation time. Also, the lower bound by-produced from the heuristic procedure is quite strong.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.281-282
• /
• 2003

Numerical investigations are carried out to study the mass flux and temperature distribution in a calandria using a 3-D RANS code. The computations made for simulations of flow and convective heat transfer with near-to working conditions. The work provides an estimate of the safe working limits of the heat dissipation by virtue of prediction of the 'hot spots' in the calandria. The work assumes significance for preliminary designs of the reactors and for detailed critical parametric analysis that would be otherwise more expensive.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2000.11a
• /
• pp.39-40
• /
• 2000

Knowledge discovery has attracted increased attention in the biomedical industry in recent years is due to the increased availability of huge amount of biomedical data and the imminent need to turn such data into useful information and knowledge. In this talk, we discuss knowledge discovery techniques for gene expression analysis and MHC-peptide binding prediction in the context of discovering protein antigens and hot spots in these antigens.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.4
• /
• pp.119-119
• /
• 2023