• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.149-154
• /
• 2001

This study discusses a non-contact optical technique, electronic speckle pattern interferometry(ESPI), that is well suited for a deformation measurement of structure. Phase shifting method and unwrapping method have used to make deformation quantitative widely. In this paper, a previous numerical formula for phase shifting method is reconstructed in addition to least square fitting method to improve sensitivity and phase unwrapping based on vertical-horizontal scanning method is applied to analyze in-plane and out-of-plane deformation quantitatively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1012-1020
• /
• 2000

In this paper, This paper presents a new algorithm which is used for detecting and extracting human masks from a color still image. The regions where each pixel has a value of skin-color were extracted from the Cb and Cr images, after the tone of the color image is converted to YCbCr from. A morphological filter is used to eliminate noise in the resulting image. By scanning it in horizontal and vertical ways under ways under threshold value, first candidate section is chosen. If it is not a face, secondary candidate section is taken and is divided into two candidate sections. The proposed algorithm is not affected by the variation of illuminations, because it uses only Cb and Cr components in YCbCr color format. Moreover, the face recognition was possible regardless of the degree of shifting face, changed shape, various sizes of the face, and the quality of image.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.281-281
• /
• 2010

In this study, ZnO nanorod arrays are grown on organic substrates by hydrothermal method which requires a low temperature, simple process, and no vacuum. The structure properties of ZnO nanorods were examined by field emission scanning electron microscopy and X-ray diffraction. To detect the optical transmission, ultraviolet visible spectrophotometer was also used. From results, the ZnO nanorods were grown the horizontal growth on the organic substrates had the length of over $10\;{\mu}m$. After deposition of ZnO seed layer, the ZnO nanorod arrays had uniformity orientation and length.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.114-117
• /
• 2020

In this study, we performed the deposition of Al thin film using a DC magnetron sputtering method. To evaluate electrical and structural properties, the growth conditions were changed in terms of two functions, namely, sputtering power ranging from 41.6 to 216 W and film growth rate ranging from 5.35 to 26.39 nm/min. The growth rate and the microstructure were characterized by a scanning electron microscopy and X-ray diffraction analysis. The plane of crystalline growth showed that the preferential (111) direction and defects due to the grain boundary increased with DC power. The resistivity of the Al film over 50 nm showed a constant value by horizontal grain growth. Our results can be applicable for the preparation of nano-templates for anodic aluminum oxide.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.11-22
• /
• 2000

Holographic interferometric tomography can provide reconstruction of instantaneous three-dimensional gross flow fields. The technique however confronts ill-posed reconstruction problems in practical applications. Experimental data are usually limited in projection and angular scanning when a field is captured instantaneously or under the obstruction of test models and test section enclosures. An algorithm, based on a series expansion method, has been developed to improve the reconstruction under the ill-posed conditions. A three-dimensional natural convection flow around two interacting isothermal cubes is experimentally investigated. The flow can provide a challenging reconstruction problem and lend itself to accurate numerical solution for comparison. The refractive index fields at two horizontal sections of the thermal plume with and without an opaque object are reconstructed at a limited view angle of 80$\circ$. The experimental reconstructions are then compared with those from numerical calculation and thermocouple thermometry. It confirms that the technique is applicable to reconstruction of reasonably complex, three-dimensional flow fields.

• Journal of the Ergonomics Society of Korea
• /
• v.20 no.3
• /
• pp.77-88
• /
• 2001

A three dimensional body scanner for anthropomentric measurement has been developed. In this study, the slit laser beam projection method followed by digital image processing was used to provide accurate spatial data with the typical optical triangulation method to overcome the many difficulties in traditional in accurate and time-consuming tactic measurement method using rulers and gauges. Compared with other commercialized scanners. this system can obtain a relatively wide range of data at a much lower cost by the specially designed scanning process such as the simultaneous acquisition of vertical and horizontal body cross-section profiles.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.269-270
• /
• 2007

In previous work[1], each codeblock is coded using a context which is adaptively selected from three kinds of scanning directions after 3D DWT. But some subbands still have correlations among the coefficients in horizontal, vertical or temporal direction. In this paper, we propose a new 3D DWT-based video compression technique in which the difference of coefficients is calculated in one of three directions for every codeblocks and coded by a context adaptively selected for each codeblock. Experimental results show that the proposed compression technique outperforms measurably and visually compared to the conventional DWT-based techniques.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.9
• /
• pp.70-76
• /
• 1996

In the Stereolithography process, three-dimensional objects are built by sequentially curing, generated by horizontal slicing of a three-dimensional CAD model. The dimensional accuracy of a menufactured part depends on the accuracy of curing performed by laser beam radius and the half of curing width. When offsetting, some slices have collinear segments, coincident vertices, line jerks and open loops. After remove above issues we have correct offsets data. And in last step, these data are used to scan paths.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.207-213
• /
• 2016

PURPOSE. A recently introduced direct drill-guiding implant surgery system features minimal tolerance of surgical instruments in the metal sleeve by using shank-modified drills and a sleeve-incorporated stereolithographic guide template. The purpose of this study was to evaluate the accuracy of this new guided surgery system in partially edentulous patients using geometric analyses. MATERIALS AND METHODS. For the study, 21 implants were placed in 11 consecutive patients using the direct drill-guiding implant surgery system. The stereolithographic surgical guide was fabricated using cone-beam computed tomography, digital scanning, computer-aided design and computer-assisted manufacturing, and additive manufacturing processes. After surgery, the positional and angular deviations between planned and placed implants were measured at the abutment level using implant-planning software. The Kruskal-Wallis test and Mann-Whitney U test were used to compare the deviations (${\alpha}=.05$). RESULTS. The mean horizontal deviations were 0.593 mm (SD 0.238) mesiodistally and 0.691 mm (SD 0.344) buccolingually. The mean vertical deviation was 0.925 mm (SD 0.376) occlusogingivally. The vertical deviation was significantly larger than the horizontal deviation (P=.018). The mean angular deviation was 2.024 degrees (SD 0.942) mesiodistally and 2.390 degrees (SD 1.142) buccolingually. CONCLUSION. The direct drill-guiding implant surgery system demonstrates high accuracy in placing implants. Use of the drill shank as the guiding component is an effective way for reducing tolerance.

• The KIPS Transactions:PartB
• /
• v.14B no.2
• /
• pp.81-88
• /
• 2007

We implement automobile license plates recognition system. These days automobile license plate recognition systems are widely used for tracing stolen cars. managing parking facilities, ticketing speeding cars, and so on. Recognition systems largely consist of three parts plates extraction, segments extraction, and segment recognition. For plates extraction, we measure the degree of inclination of plate. We use filters that extract only the horizontal components of the front of an automobile to measure the degree of inclination. For segment extraction, we trace the change of the number of blocks that consist solely of foreground pixels or background pixels as the horizontal scanning line moves along upward. For recognition of each individual letter or digit, we devise a variant of template matching method, called comparative template matching. Through experiments, we show that comparative template matching is less prone misled by noises and exhibits higher performance compared to the traditional method of template matching or histogram based recognition.