• 한국운동역학회지
• /
• 제33권4호
• /
• pp.137-146
• /
• 2023

Objective: The horizontal bar of gymnastics is fundamentally based on rotational movements. This study aimed to determine the effect of kinematics variables and sequence during horizontal bar performance (Kovacs, Tkatchev Stretched & Kolman) in gymnastic. Method: Four gymnastics athletes of the national team were participated in this study. All subjects were asked to perform the three types of horizontal bar skill. Simi marker-less cameras were used to collect the raw data (120 Hz). Kinematic variables (total time, interval, center of mass, height, angular velocity etc.) and sequence variables were calculated to examine the differences. Results: As a result, horizontal bar performance in gymnastic has special sequence that making the peak angular velocity from distal joint to proximal joint (knee-hip-shoulder). It is rare sequence that typical sport does not have. Conclusion: In field, gymnastic coaches and players should know the result that there is special sequence in horizontal bar performance. It could be very useful to teach and enhance their performance.

• 한국의류산업학회지
• /
• 제22권2호
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.

• Journal of Oral Medicine and Pain
• /
• 제38권2호
• /
• pp.149-159
• /
• 2013

이 연구의 목적은 측두하악관절장애와 외측 익돌근의 수평적 형태 간의 연관성을 조사하는 것이다. 이를 위해 10대에서 50대까지 연령군별로 각 남녀 15명씩 임의로 선정한 총 150명의 측두하악관절장애 환자에서 자기공명영상의 수평면 및 시상면상에서 나타난 외측 익돌근 및 측두하악관절의 형태적 특성을 조사하였다. 조사한 해부학적 특성은 외측 익돌근의 최대폭경, 수평 부착각도, 관절원판의 위치, 과두의 변형여부, 관절 삼출액 여부 등이며, 또한 전이부의 통증여부, 과두 주변의 압통 유무와 같은 임상적 소견이 포함되었다. 이들 해부학적 특성 및 임상적 소견의 상호 간 관련성을 분석한 결과, 비정복성 관절원판 변위를 가진 경우 외측 익돌근의 부착각도가 유의하게 높았으며 전이부에 통증이 있는 경우에는 최대 폭경이 유의하게 큰 것으로 나타났다. 뿐만 아니라 연령이 낮을수록 부착각도가 유의하게 높았으며 남성에서 최대 폭경이 더 큰 것으로 나타났다. 위의 결과를 통해 외측 익돌근 수평 부착각도가 관절원판 변위와 유의한 관련성이 있으며 전이부의 통증이 최대 폭경을 증가시키는 것으로 생각된다. 결론적으로 외측 익돌근의 높은 수평 부착각도가 관절원판 변위 발생의 중요한 해부학적 기여요인이 될 수 있으며, 측두하악관절의 통증은 외측 익돌근의 활성에 영향을 줄 수 있을 것으로 추정된다.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.85-94
• /
• 2006

The purpose of this study was to analyze the kinematics variables of during forehand stroke by stance patterns. Eight high school tennis players were chosen for the study, who have never been injured for last six months, in Busan. They performed horizontal swing and vertical swing that it was done each five consecutive trial in the condition of square, open and semi-open stance. It was filmed by 6 video camera and used with 3-dimensional motion analyzer system. The following kinematic variables were analyzed in relation to angle of segment( shoulder, hip and knee joint). The conclusion were as follow: 1. The angle of hip joint represented at impact that horizontal swing was not significant difference by stance patterns but vertical swing was increased in open stance than square and semi-open stance. 2. The angle of both knee was not significant difference between all stance types and swing patterns. 3. The angle of shoulder, hip and knee joint rotation showed that open stance was increased than square and semi-open stance in all swing types and event.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.48-61
• /
• 2011

In this study, static tests were done on the joints between precast manholes and the joints between manhole and sewer. The static loading tests in not only elastic range but also ultimate state of model members were carried out to investigate the bond strength and ultimate load of a joint of precast manholes. Specimens were tested in bending, horizontal shear, horizontal shear of circumferencial direction and direct tension. The results of tests indicated good structural performance of the joints between precast manholes and the joints between manhole and sewer.

• Journal of Oral Medicine and Pain
• /
• 제25권2호
• /
• pp.173-189
• /
• 2000

The purpose of this study was to evaluate the effect of specific head positions on the mandibular rotational torque movements in maximum mouth opening, protrusion and lateral excursion. Thirty dental students without any sign or symptom of temporomandibular disorders(TMDs) were included as a control group and 90 patients with TMDs were selected and examined by routine diagnostic procedure for TMDs including radiographs and were classified into 3 subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Mandibular rotational torque movements were observed in four head postures: upright head posture(NHP), upward head posture(UHP), downward head posture(DHP), and forward head posture(FHP). For UHP, the head was inclined 30 degrees upward: for DHP, the head was inclined 30 degrees downward: for FHP, the head was positioned 4cm forward. These positions were adjusted with the use of cervical range-of-motion instrumentation(CROM, Performance Attainment Inc., St. Paul, U.S.A.). Mandibular rotational torque movements were monitored with the Rotate program of BioPAK system (Bioresearch Inc., WI, U.S.A.). The rotational torque movements in frontal and horizontal plane during mandibular border movement were recorded with two parameters: frontal rotational torque angle and horizontal rotational torque angle. The data obtained was analyzed by the SAS/Stat program. The obtained results were as follows : 1. The control group showed significantly larger mandibular rotational angles in UHP than those in DHP and FHP during maximum mouth opening in both frontal and horizontal planes. Disc displacement with reduction group showed significantly larger mandibular rotational angles in DHP and FHP than those in NHP during lateral excursion to the affected and non-affected sides in both frontal and horizontal planes(p<0.05). 2. Disc displacement without reduction group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening as well as lateral excursion to the affected and non-affected sides in both frontal and horizontal planes. Degenerative joint disease group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening, protrusion and lateral excursion in both frontal and horizontal planes(p<0.05). 3. In NHP, mandibular rotational angle of the control group was significantly larger than that of any other patient subgroups. Mandibular rotational angle of disc displacement with reduction group was significantly larger than that of disc displacement without reduction group during maximum mouth opening in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group or degenerative joint disease group during maximum mouth opening in the horizontal plane(p<0.05). 4. In NHP, mandibular rotational angles of disc displacement without reduction group were significantly larger than those of the control group or disc displacement with reduction group during lateral excursion to the affected side in both frontal and horizontal planes. Mandibular rotational angle of disc displacement without reduction group was significantly smaller than that of the control group during lateral excursion to the non-affected side in frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group during lateral excursion to the non-affected side in the horizontal plane(p<0.05). 5. In NHP, mandibular rotational angle of the control group was significantly smaller than that of disc displacement with reduction group or disc displacement without reduction group during protrusion in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of the disc displacement with reduction group or degenerative joint disease group during protrusion in the horizontal plane. Mandibular rotational angle of the control group was significantly smaller than that of disc displacement without reduction group or degenerative joint disease group during protrusion in the horizontal plane(p<0.05). 6. In NHP, disc displacement without reduction group and degenerative joint disease group showed significantly larger mandibular rotational angles during lateral excursion to the affected side than during lateral excursion to the non-affected side in both frontal and horizontal planes(p<0.05). The findings indicate that changes in head posture can influence mandibular rotational torque movements. The more advanced state is a progressive stage of TMDs, the more influenced by FHP are mandibular rotational torque movements of the patients with TMDs.

• 대한족부족관절학회지
• /
• 제16권2호
• /
• pp.101-107
• /
• 2012

Purpose: The aim of this study was to investigate the radiological characteristics of the osteoarthritis of the second metatarsophalangeal (MTP) and tarsometatarsal (TMT) joint. Materials and Methods: Between January 2002 and August 2010, 27 patients (33 feet) who had second metatarsal osteoarthritis (OA) were reviewed retrospectively. Group 1 was 14 patients (17 feet) with second MTP joint OA. Group 2 was 13 patients (16 feet) with second TMT joint OA. Group 3 was 24 patients (25 feet) had hallux valgus without second metatarsal (MT) OA as control. Weight bearing foot anteroposterior (AP) and lateral view were checked, and measured hallux valgus angle, metatarsus adductus angle (MAA), second MT functional length, first and second MT length by Hardy & Clapham method on AP view, angle of second MT with horizontal plane, calcaneal pitch, talo-first MT on lateral view. Results: On weight bearing foot AP view, second MT functional length of group 1, 2, 3 was 2.4 mm, -0.1 mm, 0.7 mm and MAA of group 1, 2, 3 was $17.7^{\circ}$, $17.7^{\circ}$, $14.5^{\circ}$. Second MT functional length of group 1 was longer than control group and it was statistically significant. MAA was significant different between group 1-3 and group 2-3. Angle of second MT with horizontal plane of group 2 was smaller than control group and it was statistically significant. Other radiographic parameters have no statistical significance. Conclusion: Group 1 has long functional length of second MT and group 2 has small angle of second MT with horizontal plane.

• 한국공간구조학회논문집
• /
• 제9권2호
• /
• pp.45-52
• /
• 2009

이 논문은 반복-수평력을 받는 프리캐스트 기둥-RC 기초 Anchor 접합부의 반복-수평력에 대한 내력 특성을 규명하기 위함이다. 본 연구는 하부 기초에 프리캐스트 콘크리트 기둥과 기초를 Anchor식으로 접합한 콘크리트 구조체가 정확한 응력전달 경로 및 파괴 메커니즘에 있어서 기존의 콘크리트-강재 연결부와 어떠한 차이가 있는지 제시한다. 반복-수평력 작용하의 철근의 인발력 실험결과는 프리캐스트 기둥-RC 기초 Anchor 시공에 필요한 철근의 최소 필요 삽입 깊이를 제시한다. 또한, 실험을 통해 제시된 응력 전달 경로 및 파괴 메커니즘을 제품별 메뉴얼에 제시되어 있는 메커니즘과 비교, 검토함으로서 접합부의 명확한 응력전달 경로 및 파괴 메커니즘을 시공자의 요구 성능에 맞게 제시한다. 그러므로 본 연구를 통해 프리캐스트 콘크리트 기둥의 정확한 주근의 개수, 공칭직경, 정착 길이 등에 대한 최적의 설계 조건을 제시함으로써, 시공 시 이들에 대한 정확한 데이터를 제공한다.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.539-551
• /
• 2023

In order to study the fire resistance of castellated composite beams with ortho-hexagonal holes and different beam-end restraints, temperature rise tests with constant load were conducted on full-scale castellated composite beams with ortho-hexagonal holes and hinge or rigid joint constraints to investigate the temperature distribution, displacement changes and failure patterns of castellated composite beams with two different beam-end constraints during the whole course of fire. The results show that (1) During the fire, the axial pressure and horizontal expansion deformation generated in the rigid joint constrained composite beam were larger than those in the hinge joint constrained castellated composite beam, and their maximum horizontal expansion displacements were 30.2 mm and 17.8 mm, respectively. (2) After the fire, the cracks on the slab surface of the castellated composite beam with rigid joint constraint were more complicated than hinge restraint, and the failure more serious; the lower flange and web at the ends of the castellated steal beams with hinge and rigid joint constraint produced serious local buckling, and the angles of the ortho-hexagonal holes at the support cracked; the welds at both ends of the castellated composite beam with rigid joint constraint cracked. (3) Based on the simplified calculation method of solid-web composite beam, considering the effect of holes on the web, this paper calculated the axial force and displacement of the beam-end constrained castellated composite beams under fire. The calculation results agreed well with the test results.

• 화약ㆍ발파
• /
• 제36권4호
• /
• pp.9-15
• /
• 2018

발파에 의한 암석의 파쇄도는 적재, 운반과 2차 파쇄로 이어지는 후속공정에 직접적인 영향을 미치므로 파쇄도의 조절은 발파 효율성과 생산비용을 평가하는데 필수적이다. 본 연구에서는 인공절리의 방향에 따른 암석의 파쇄도에 대해 분석하였다. 갱내 암반에 수직 및 수평인공절리를 생성한 후 발파실험을 수행하였다. 생성된 암석파쇄물의 입도분포는 2차원 영상해석 프로그램인 split-desktop으로 평가하였다. 평가결과 수평인공절리가 수직인공절리에 비해 전체적인 암석파쇄물의 크기가 작게 평가되었고, 다양한 크기로 암석파쇄물이 분포하였다. 인공절리의 방향에 따라 대괴발생을 억제하고 암석파쇄물을 일정한 크기 이하로 조절 할 수 있을 것으로 판단된다.