• 한국농공학회논문집
• /
• 제54권1호
• /
• pp.39-45
• /
• 2012

In this study, field test on utilization of recycled aggregates and crushed stone as horizontal drains to use an alternative material of sand in soft ground is practiced. The settlement with time showed similarly ranged from 28.4-30.3 cm in the all horizontal materials. The excess pore water pressure of the recycled aggregates and crushed stone showed smaller than sand. The small the excess pore water pressure becomes faster the consolidation period and it can reduces the amount of residual settlement. Therefore, it was verified as having enough to an alternative materials that the field applicability is excellent. The distribution of earth pressure with time showed similarly in the all horizontal materials. The recycled aggregates and crushed stone was very applicable to practice because there is no mat resistance in the horizontal drains layer. The penetration rate in the SCP and PVD improvement sections did not show large differences as the grain size and the horizontal drainage height increases.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.641-648
• /
• 2000

The horizontal drain method by installing drains horizontally in the ground is often used to expedite the dispersion of pore water and to increase the strength of dredged soft clay under the action of gravity or vacuum. In this study a numerical analysis method is developed to predict the consolidation process of soft ground with horizontal drains. One-dimensional self-weight consolidation theory is extended tn three-dimensions] theory with appropriate boundary conditions of horizontal drains. In the condition of pore water drainage by gravity, the behavior of the dredged clay with horizontal drains is compared with that of the clay without drains. The influence of design factors of drains on consolidation process is also analyzed.

• 천문학회보
• /
• 제37권1호
• /
• pp.84.1-84.1
• /
• 2012

Recent spectropolarimetric observations with high spatial resolution and high polarization sensitivity have provided us with new insight to better understand the quiet-Sun magnetism. This talk is concerned with the ubiquitous transient horizontal magnetic fields in the quiet-Sun, as revealed by the Solar Optical Telescope (SOT) on board Hinode satellite. Exploiting the SOT data with careful treatment of photon noise, we reveal the enigmatic properties of these horizontal magnetic fields such as lifetime, size, position in terms of granular structure, occurrence rate, three-dimensional structure, total magnetic flux, field strength distribution, relationship with the meso- and super-granulations and so on. Based on these observational consequences, we conjecture that the local dynamo process, which takes place in a relatively shallow layer with the granular size, produces these transient horizontal magnetic fields and that these horizontal magnetic fields contribute to the considerable amount of quiet-Sun magnetic fields. We also estimate the magnetic energy flux carried by these horizontal magnetic fields based on the statistical data, and find that the total magnetic energy is comparable to the total chromospheric and coronal energy loss, implying their important role for the chromospheric heating and dynamism.

• 비파괴검사학회지
• /
• 제36권2호
• /
• pp.149-154
• /
• 2016

The use of nonlinear ultrasonics wave has been accepted as a promising tool for monitoring material states related to microstructural changes, as it has improved sensitivity compared to conventional non-destructive testing approaches. In this paper, third harmonic generation of shear horizontal guided waves propagating in an isotropic plate is investigated using the perturbation method and modal analysis approach. An experimental procedure is proposed to detect the third harmonics of shear horizontal guided waves by electromagnetic transducers. The strongly nonlinear response of shear horizontal guided waves is measured. The accumulative growth of relative acoustic nonlinear response with an increase of propagation distance is detected in this investigation. The experimental results agree with the theoretical prediction, and thus providing another indication of the feasibility of using higher harmonic generation of electromagnetic shear horizontal guided waves for material characterization.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.124-129
• /
• 2011

Since the horizontal global radiation and cloud cover are a main factor for designing any solar energy system, it is necessary to evaluate its characteristics all over the country. The work presented here are the investigation of horizontal global radiation and cloud cover in Korea. The data utilized in the investigation consist of horizontal global radiation and cloud cover collected for 27 years(1982.12~2008.12) at measuring stations across the country. The analysis shows that the annual-average daily horizontal global radiation is $3.61kWh/m^2$ and the annual-average daily cloud cover is 5.1 in Korea. We also constructed the contour map of cloud cover in Korea by interpolating actually measured data across the country.

• 대한설비공학회지:설비저널
• /
• 제5권3호
• /
• pp.178-197
• /
• 1976

Based on the measurement data on Radiation on a Horizontal Surface at 84 different areas in South Korea which were collected and recorded by the Central Meteorological Office, the average values in the period of 5 years from 1971 thru 1975 at 12 particular areas of Gangreung, Gyeongju, Gwangju, Gimhae, Mogpo, Seoul, Iri, Jeju, Jinju, Cheongju and Chungju are indicated in this report. For above 12 areas the following data have been obtained and are indicated in each tables. Annual totalization of Radiation on a Horizontal Surface and its yearly averaged daily totalization$cdots$Table 1. Monthly totalization of Radiation on a Horizontal Surface and its monthly averaged daily totalization$cdots$Table 2 Maximum and minimum values of daily totalization of Radiation on a Horizontal Surface$cdots$Table 3 Daily variation of monthly averaged Radiation on a Horizontal Surface$cdots$Table 4 thru 15 Decade averaged Radiation on a Horizontal Surface$cdots$Table 16 thru 27

• 치과방사선
• /
• 제23권2호
• /
• pp.207-211
• /
• 1993

The auther has evaluated the panoramic image of the mandibular condyle according to its horizontal codylar angle(0°, 10°, 20°, 30°, 40°) and intercondylar distance( 9.5, 11.0, 12.5, 14.0㎝). The Results were as follows: 1. In all horizontal condylar angle, the farther the intercondylar distance was, the smaller the horizontal length in radiogram was. 2. The increased the horizontal condylar angle was, the longer in horizontal direction and the shorter in vertical direction the image of superior condylar surface was. 3. In case of large horizontal condylar angle, the real mesial surface of condyle was projected to the posterior surface on radiograph.

• 한국농공학회논문집
• /
• 제52권6호
• /
• pp.111-123
• /
• 2010

In this study, laboratory model test on utilization of recycled aggregates and crushed stone as horizontal drains to use alternative material of sand in soft ground is practiced. The coefficient of permeability of the recycled aggregates and crushed stone showed largely 1.2~5.1 times and 2.0~3.3 times greater than sand, respectively. The horizontal coefficient of permeability in case of installing the horizontal perforated drain pipe showed largely 1.9~6.8 times more than the case of not installing. The drainage distance showed 1.7~1.8 times greater than sand. When a degree of consolidation is 90 %, there is no delay of consolidation in SCP and PVD improvement sections. Therefore, it is proven that the field applicability is excellent. Also, the suitable quality management criterion is presented to make use of a horizontal drains in soft ground on the basis of analysis of the physical and environmental characteristics.

• 지구물리와물리탐사
• /
• 제7권4호
• /
• pp.245-250
• /
• 2004

단일 채널 해양 탄성파탐사 자료의 2차원 탄성파 단면도에 수평거리 보정을 적용하여 탄성파 단면도의 수평축을 거리 단위로 표현하였다. 수평축을 거리 단위로 표시함으로써 탐사선의 운항 속력이 변할 경우 나타나는 수평 거리 왜곡 현상을 상당히 해소할 수 있었다. 수평거리 보정을 위하여 탄성파 자료의 각 트레이스에 저장된 GPS 위치 정보와 자료 취합 윈도우를 이용하였다. 자료 취합 윈도우의 최소 길이는 탐사선의 속력과 발파 간격에 의해 결정하였으며, 최대 길이는 1차 프레넬대 반경을 이용하여 결정하였다. 자료 취합 윈도우의 길이를 결정함에 있어 수평 해상도와 중합의 효과를 동시에 고려하였다. 수평거리 보정 과정을 적용하여 실제 지층구조와 유사하다고 생각되는 2차원 탄성파 단면도를 작성할 수 있었다.

• Imaging Science in Dentistry
• /
• 제44권3호
• /
• pp.207-212
• /
• 2014

Purpose: This study aimed to investigate the deviation of landmarks from horizontal or midsagittal reference planes according to the methods of establishing reference planes. Materials and Methods: Computed tomography (CT) scans of 18 patients who received orthodontic and orthognathic surgical treatment were reviewed. Each CT scan was reconstructed by three methods for establishing three orthogonal reference planes (namely, the horizontal, midsagittal, and coronal reference planes). The horizontal (bilateral porions and bilateral orbitales) and midsagittal (crista galli, nasion, prechiasmatic point, opisthion, and anterior nasal spine) landmarks were identified on each CT scan. Vertical deviation of the horizontal landmarks and horizontal deviation of the midsagittal landmarks were measured. Results: The porion and orbitale, which were not involved in establishing the horizontal reference plane, were found to deviate vertically from the horizontal reference plane in the three methods. The midsagittal landmarks, which were not used for the midsagittal reference plane, deviated horizontally from the midsagittal reference plane in the three methods. Conclusion: In a three-dimensional facial analysis, the vertical and horizontal deviations of the landmarks from the horizontal and midsagittal reference planes could vary depending on the methods of establishing reference planes.