• Economic and Environmental Geology
• /
• v.21 no.4
• /
• pp.381-387
• /
• 1988

Maewol Feldspar Mine produces feldspar ore from pegmatites. K-Rb Age of muscovite is 137.7Ma. Fluid inclusions in quartz crystal of the pegmatite show bimodal distribution of homogenization temperatures. The high homogenization temperatures range from 290 to $302^{\circ}C$ while low homogenization temperatures range from 157 to $195^{\circ}C$. Three phases liquid $CO_2$ bearing inclusions indicate $CO_2$ gases were abundantly mixed with granitic melt until the pegmatic magma melt cooled to $290^{\circ}C$. Low density of the magmatic melt relative to the same volume of granitic magma is due to mixture of volatiles(mainly $CO_2$ gases) with the melt and larger space and slow cooling allowed to grow crystals of the pegmatic magma.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.181-191
• /
• 2002

The homogenization method is applied to maximize crash energy absorption for a given volume. Optimization analysis off closed-hat type example problem is conducted with different impact velocities and thicknesses. The results show that the bending-type deformation for the original design is changed to the folding-type deformation for a new design with a hole, which is partly due to the increase of the crash energy absorption for the new design. Dynamic mean crushing loads of the original and new design are compared with those by the theoretical equation by Wierzbicki. It shows that the dynamic mean crushing loads of new designs are very close to those by Wierzbicki's equation.

• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.565-576
• /
• 1997

The material-based homogenization design method generates arbitrary topologies of initial structural design as well as reinforcement structural design by controlling the amount of material available. However, if a small volume constraint is specified in the design of Lightweight structures, thin and slender structures are usually obtained. For these structures stability becomes one of the most important requirements. Thus, to prevent overall buckling (that is, to increase stability), the objective of the design is to maximize the buckling load of a structure. In this paper, the buckling analysis is restricted to the linear buckling behavior of a structure. The global stability requirement is defined as a stiffness constraint, and determined by solving the eigenvalue problem. The optimality conditions to update the design variables are derived based on the sequential convex approximation method and the dual method. Illustrated examples are presented to validate the feasibility of this method in the design of structures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.752-759
• /
• 2006

Conglomerates and core-stones are the typical composite geomaterials that are composed of a weak matrix and a strong pebble part. In general, we couldn't analyze the composite geomaterials by using emperical rock classification methods. In the study, a series of analyses of elastic behavior of composite geomaterials are carried out by using homogenization theory. 45-case models are made with considering 3 kind of factors such as gravel content, size and strength of matrix. Those are applicable to various composite geomaterials of conglomerates and core-stones. The size of analysis model is large enough to exceed REV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.167-167
• /
• 2010

Ge-Sb-Se계 칼코게나이드 유리의 Melting 조건변화에 따른 특성변화를 연구하였다. Glass melting 조건(homogenization-temperature, homogenization-time, annealing) 에 따라 제작된 칼코게나이드 유리 bulk를 FT-IR, XRD, SEM 등의 분석장비를 이용하여 특성을 분석하였다. Homogenization temperature가 높을수록 석영관 급냉 시 발생되는 mechanical stress와 내부응력차로 인해 칼코게나이드 유리 깨짐현상이 증가하였으며 조성비와 melting 조건에 따라 XRD분석에서 확인되지 않는 미소결정이 SEM 분석결과 관찰되었다. 본 연구를 통해 칼코게나이드 유리의 melting 조건에 따른 경향성을 확인할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1352-1361
• /
• 2000

We obtain a micromechanics-based Helmholtz free energy and then in the framework of irreversible thermodynamics, a kinetic relation, a martensitic nucleation criterion and the reorientation criterion of martensitic variants are obtained. These relations are valid for a three-dimensional proportional and non-proportional loadings and for a combination of mechanical and thermal loading. From the simulated pseudoelastic stress-strain relation of a single crystal with loading rate effect, polycrystalline behavior in case of proportional and non-proportional loading is predicted by a homogenization method. The obtained results are compared quantitatively with experimental results.

• The Plant Pathology Journal
• /
• v.26 no.3
• /
• pp.286-288
• /
• 2010

Plant tissue homogenization using a mortar or mechanical equipment has been the preferred method for obtaining high yields of total RNA; this method, however, is both time-consuming and expensive. Additionally, homogenization may generate excessive endogenous RNases, polyphenolics, and other substances that reduce the quality and quantity of RNA. In this study, we describe the microwave irradiation-assisted RNA extraction (MIRE) technique which, without tissue disruption and homogenization, allows for the cost-effective and rapid generation of intact RNA from apple cane shavings and the reliable detection of apple virus by RT-PCR.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.11
• /
• pp.1203-1210
• /
• 2013

Korea's first Naro-Science small class satellite was launched by Naro launcher in 2013. The structure of the satellite is mostly composed of aluminum honeycomb and frame. The honeycomb structure is homogenized with asymptotic homogenization method and its mechanical properties were used for the numerical analysis. There have been some difficulties to modeling the honeycomb sandwich panels for FEA. In the present study, the mechanical characteristics of the sandwich panel composite were numerically computed and used for the simulation. This methodology makes it easy to overcome the weakness of modeling of complicated sandwich panels. Both an experiment of vibration test and numerical analyses were conducted simultaneously. The analysis results from the current homogenization were compared with that of experiment. It shows a good agreement on the dynamic responses and certified the reliability of the present methodology when manipulate sandwich panel structure.

• Composites Research
• /
• v.15 no.5
• /
• pp.44-52
• /
• 2002

To study numerically the mechanical behaviors of advanced composite materials considering the microscopic phenomena as well as the macroscopic properties and behaviors, a multi-scale modeling and analysis by the mathematical homogenization method with the help of the finite element method(FEM) are reviewed. The hierarchical modeling strategy and the formulation are briefly described first to give some idea of the multi-scale framework. The latter half of this article focuses on the verification of the multi-scale analysis by the homogenization method in its applications to real advanced materials. The first example is the verification of the predicted macroscopic(homogenized) properties based on the microstructure of porous ceramics. In spite of the complexity of the random microstructure, the error between the predicted and the measured values was only 1%. Next, two applications to the process simulation of fiber reinforced polymer matrix composites are presented. The permeability characteristics are evaluated for sheared weave fabrics for resin transfer molding(RTM) simulation, and the thermoforming of FRTP sheet is analyzed considering the large deformation of the knit structure during the deep-draw forming was verified by comparison with the experimental results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1603-1609
• /
• 1998

Numerical solutions of Stokes flow through periodic arrays of cylinders were sought using Darcy's law and homogenization theory. Drag and lift forces of each cylinder were computed for various attack angles and pitch-to-diameter ratios. It was found that drag force decreased as principal pressure gradient direction deviated from array direction and that drag force increased exponentially as pitch-to-diameter ratio approached unity. Similar tendency was found in lift force except that lift force increased and then decreased in quadratic manner as attack angle varied.