• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.115-120
• /
• 2012

In this paper, we present a method to automatically quantify the three-dimensional (3D) volume of red blood cells (RBCs) using off-axis digital holographic microscopy. The RBCs digital holograms are recorded via a CCD camera using an off-axis interferometry setup. The RBCs' phase image is reconstructed from the recorded off-axis digital hologram by a computational reconstruction algorithm. The watershed segmentation algorithm is applied to the reconstructed phase image to remove background parts and obtain clear targets in the phase image with many single RBCs. After segmenting the reconstructed RBCs' phase image, all single RBCs are extracted, and the 3D volume of each single RBC is then measured with the surface area and the phase values of the corresponding RBC. In order to demonstrate the feasibility of the proposed method to automatically calculate the 3D volume of RBC, two typical shapes of RBCs, i.e., stomatocyte/discocyte, are tested via experiments. Statistical distributions of 3D volume for each class of RBC are generated by using our algorithm. Statistical hypothesis testing is conducted to investigate the difference between the statistical distributions for the two typical shapes of RBCs. Our experimental results illustrate that our study opens the possibility of automated quantitative analysis of 3D volume in various types of RBCs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.10-14
• /
• 2015

In holographic data storage systems, data is recorded and read by page on a volume of storage medium, and it can increase transmission rate and storage capacity because of two-dimensional page-oriented data processing by charge-coupled devices. However, HDS suffers two-dimensional intersymbol interference unlike conventional data storages. In this paper, we propose a preprocessing method of decreasing ISI before read data in HDS pass to detector. This method has some advantage when we collaborate with the preprocessing for reducing misalignment error and modulation code.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.574-592
• /
• 1996

This study investigated the time-dependent dimensional changes of elastomeric impression materials using holographic interferometry. Six commercial impression materials, Permlastic(polysulfide), Xantopren VL (condensation silicone), low and medium viscosity of Exafine, Provil (addition silicone), and Impregum(polyether), were selected. Steel plate was used as custom tray, and each impression specimen was 20 mm in width, 15 mm in length and 3 mm in thickness. Each impression material was evaluated at 30 minutes, 1, 2, 4, 6, 8 and 12 hours after setting using real-time holography. The results were as follow : 1. Xantopren VL and Permlastic showed relatively severe and continuous dimensional changes after setting. Low viscosity of Exafine, Provil, Impregum showed relatively slight dimensional changes with function of time and medium viscosity of Exafine showed almost no dimensional change from 2 hours after setting to 6 hours. 2. On initial dimensional changes within 1 hour, the amount of change in low viscosity of Exafine was the least and Xantopren VL was the largest. 3. On dimensional changes at 4 hours after setting, the amount of change in medium viscosity of Exafine was the least and tile change of Xantopren VL was the largest. 4. In overall dimensional stability during 12 hours, medium viscosity of Exafine was the most stable and Xantopren VL and Permlastic were least stable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.5
• /
• pp.215-219
• /
• 2014

In holographic data storage (HDS), a high transmission rate is accomplished through the use of a charge coupled device array for reading two-dimensional (2D) pixel image data. Although HDS has many advantages in terms of storage capacity and data transmission rates, it also features problems, such as 2D intersymbol interference (ISI) by neighboring pixels and interpage interference (IPI) by multiple images stored in the same holographic volume. Modulation codes can be used to remove these problems. We introduce a 2D 8/9 error-correcting modulation code. The proposed modulation code exploits the trellis-coded modulation scheme, and the code rate is larger (about 0.889) than that of the conventional 6/8 balanced modulation code (an increase of approximately 13.9%). The performance of the bit error rate (BER) with the proposed scheme was improved compared with that of the 6/8 balanced modulation code and the simple 8/9 code without the trellis scheme.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.133-136
• /
• 2001

In this paper, we investigated the diffraction efficiency of polarization holography using by amorphous Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/ multi-layer thin films by He-Ne laser. Multi-layer structures were formed by alternating a layer of metal(Ag) and chalcogenide(As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/). The holographic grating in these thin films has been formed using a lineally polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two sample of Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-7 layers and Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-15 layers. As the results, we found that the diffraction efficiency of Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-7 layers and Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-15 layers were 1.7% and 2.5% respectively

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.5-9
• /
• 2013

Page-oriented holographic data storage (HDS) is very sensitive to the disturbances. However, vibration effect by disc imbalance can be ignored because data pages are recorded and retrieved with stop-go rotation. Therefore, just estimating de-track due to eccentricity of disc is enough to construct stable track servo system. In this paper, propose the spacing of track servo patterns optimization method using Least Mean Square (LMS) estimation algorithm. Through the patterns spacing optimization, storage density maximize can be achieved.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.173-180
• /
• 2002

Smartcard is highlighted as infrastructure that has an excellent security for executing functions such as user authentication, access control, information storage and control, and its market is expanding rapidly. But possibilities of forgery and alteration by hacking are increasing as well. This Paper makes cut off of Smartcard forgery and alteration that use angular multiplexing and private key multiplexing hologram on holographic security Encryption, and proposes system capable verfication of forgery and alteration impossible on existing smartrard by adopting smartcard chip and holographic memory chip.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.490-493
• /
• 2003

We have carried out two-beam interference experiment to form holographic grating on amorphous $As_{40}Ge_{10}Se_{15}S_{35}/Ag$ double-layer. In this study holographic grating formed using He-Ne laser(632.8nm) under non-polarization state and p-polarization state and we confirm that the diffraction efficiency depend on thickness of Ag. The diffraction efficiency was obtained by first order intensity. We got the maximum diffraction efficiency that thickness of Ag was $600{\AA}$. The maximum diffraction efficiency was 13.5% in (P:P) polarization state.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1233-1240
• /
• 1996

Conventional measurement methods using ultrasonic wave or x-ray, eddy current for non-destructive testing(NDT) in nuclear power plants and other industrial plants have been utilized as the method of contact with objects to be inspected. For this reason these methods require relatively much time and inspection area is limited by the location of probe or film. But holograpic interferometry which is a non-contact optical measurement method using a coherent light source has an advantage that quantative measurement can be performed at a time. In this paper a new method using realtime holographic interfreometry and image processing for detecting internal flaws of pressure vessels is presented.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.12-15
• /
• 1990

Holospeckle interferometry, the combined technique of holographic interferometry and speckle photography, was applied to the measurement of 3-D contact deformation created by an indentor. This new tech$.$ nique makes possible to measure both in-plane and out-of-plane displacements from one photographic plate. In this study, the optical system based on image holography was set up. In order to enhance the size and the contrast of the speckle, a proper magnification and a low reference beam ratio was used as compared with the conventional holographic interferometry technique. This system shows the magnified and clear holographic interference fringe as well as Young's fringe patterns.tterns.