• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.205-217
• /
• 1998

Several aspects of conscious about somato-type were analysed for high school girls among Seoul, Kwangju, Wando. Questionnares was comprised of 24 item of the conscious about somatotype. Questionnaress were sent to sample of students of high school. The data from 593 respondantss were analysed in using Freequency, Crosstab, and T-test. The results were as follows: 1. High school students in Wando tend to have shorter and fatter than Seoul and Kwangju. 2. Respon-dents were conscioused of , , . 3. Of the trouble of somatotype, respondents of all region have troubled about , , , , It was founded that Respon-dents in Seoul have much the trouble about , than other regions. 4. Mean of Agreement of somatotype were scored 3.49 in Seoul 3.37 in Kwangju, 3.39 in Wando. It was founded that respondents in Seoul were not satisfied more than Kwangju, Wando. And then Respondents in Seoul have strong aspiration to be slim about somatotype although they are a stansard somatotype.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.191-199
• /
• 2007

This study was conducted to examine the biomechanical characteristics of open spike in the volleyball to improve the technique of the volleyball spike. The subjects were six male college and high school athletes. The motions of volleyball spike were filmed by using two Sony VX 2000 Video Cameras. The mechanical factors were angle and angular velocity of body segments in the upper and the lower limbs. The conclusions were as follows; 1. The angle of the shoulder joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 2. The angle of the elbow joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 3. The angle of the wrist joint of the skilled showed smaller than that of the unskilled in impacting of the volley ball spike. 4. The angle of the hip joint of skilled showed larger than that of unskilled in impacting of the volley ball spike. 5. The angle of the knee joint of the skilled and the unskilled showed same in take off and impacting of the volley ball spike, and that of the skilled showed smaller than that of the unskilled in take-off touchdown and touchdown after impact of the volley ball spike. 6. The angle of the ankle joint of skilled showed larger than unskilled in take-off of the volley ball spike. 7. The angular velocity of the shoulder joint, elbow joint, wrist joint of the skilled showed faster than that of the unskilled in impacting of the volley ball spike. Taken together the result of them, I have come to conclusion that knee joint angle in touchdown of the take off should be decreased and knee joint angle in take off should be increased, and then stability of the take off should be made and, and that extension of the elbow joint should be made and wrist joint angle decreased and shoulder and hip joint angle increased, and then C.O.G of the arm and hand should be positioned ahead C.O.G of the body in impacting for effective impact of the spike, and that the transfer of the angular velocity of body segments for effective impact of the spike make from the proximal segment to the distal segment at spike in volleyball.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.508-514
• /
• 2019

In the development of advanced ceramic tools, material improvements and design freedom are critical in improving tool performance. However, in the die press molding method, many factors limit tool design and make it difficult to develop innovative advanced tools. Ceramic 3D printing facilitates the production of prototype samples for advanced tool development and the creation of complex tooling products. Furthermore, it is possible to respond to mass production requirements by reflecting the needs of the tool industry, which can be characterized by small quantities of various products. However, many problems remain in ensuring the reliability of ceramic tools for industrial use. In this study, alumina inserts, a representative ceramic tool, was manufactured using the digital light process (DLP), a 3D printing method. Alumina inserts prepared by 3D printing are pressurelessly sintered under the same conditions as coupon-type specimens prepared by press molding. After sintering, a hot isostatic pressing (HIP) treatment is performed to investigate the effects of relative density and microstructure changes on hardness and fracture toughness. Alumina inserts prepared by 3D printing show lower relative densities than coupon specimens prepared by powder molding but indicate similar hardness and higher fracture toughness values.

• Journal of Chest Surgery
• /
• v.28 no.3
• /
• pp.233-236
• /
• 1995

Subepicardial space is one of the regions in which fat in moderate amount is normally deposited. When excess deposits of epicardial fat occur, penetration or infiltration of fat into the connective tissues between muscle bundles is observed. In some cases with very extensive involvement of epicardial fat,myocardial insufficiency and conduction system defect such as heart block have been implicated. More fat is deposited over the right ventricle than over left and the anterior surface contains more fat than dose the posterior surface. We studied 40 patients who underwent open heart surgery under the cardiopulmonary bypass. This study was designed to evaluate the percentage of the area of epicardial fat of the right ventricular anterior surface, which is more accessible area during the operative procedure. Other variables included thickness of subcutanous tissue of anterior chest wall, the ratio of waist to hip circumference, body weight and age. In conclusion, the amount of the epicardial fat correlates with thickness of the subcutaneous fat of the anterior chest wall and simple linear regression analysis indicates good correlation with body weight. Increased age results in large amount of epicardial fat.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1128_1129
• /
• 2009

본 논문에서는 Ni-MH전지를 가로등용 독립형 태양광발전시스템의 전력저장장치로 적용하고 충방전제어기를 설계하고 시스템을 구성하여 운전특성을 분석하였다. 태양전지모듈은 170W Sanyo사의 HIP-170N1을 사용하였고 전력저장장치는 Ni-MH 전지를 적용하였으며 부하인 가로등용 램프로는 24V, 45W 삼파장 램프를 사용하여 가로등용 독립형 태양광발전 시스템을 구성하였다. 또한 충방전 제어기를 구성하여 Ni-MH 전지의 충방전 특성을 분석하였다. Ni-MH 전지의 충방전 전압은 27V 좌우로 안정적으로 충방전이 되고 있음을 알 수 있었으며 축전지의 온도 상승도 15시 이후에 최고 $35^{\circ}C$로 나타났다. 이는 Ni-MH전지에 적용한 충전 시스템이 온도에 의하여 충전 말기 전압을 제어하기 때문으로써 축전지의 과충전 현상을 방지하여 축전지의 수명을 증가할 수 있을 것으로 판단되어진다.

• The Journal of Korea Robotics Society
• /
• v.12 no.2
• /
• pp.107-115
• /
• 2017

In this paper, four-bar linkage mechanism for the knee joint is developed which is used in prosthetics. But unlike the prosthetics, the feature of this mechanism is that the instantaneous center of rotation of the four-bar linkages can be moved behind the ground reaction force vector so that it can be passively supported without any external power. In addition, this mechanism is developed similar to the structure of the human knee joint for eliminating the sense of heterogeneity of the wearer. In order to design the mechanism with these two objectives, optimization design process is done using the PIAnO tool and detailed design is carried out through optimized variable values. The developed mechanism is attached to the robot which can assist the hip and ankle joints. In order to verify the operation of the developed knee mechanism, an insole type sensor was attached to the shoes to compare data values before and after wearing the robot. Result data showed that wearer wearing the exoskeleton robot with the knee mechanism was the same value regardless of whether the heavy tool is loaded or not.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.329-335
• /
• 2004

The purpose of this study was to investigate the differences between the body cathexis, appearance management behaviors and satisfaction with apparel fit according to physical figure of college women who had deep interests in their body and appearance. Data for this study was obtained from 413 college women in Taegu and Kyungpook Province. Means, t-test, ANOVA and Scheffe's post hoc comparison were used in data analysis. The result of this study were; 1. It was found that both body Cathexis and fit satisfaction of college women were generally low. College women were less satisfied with their body and fit of apparel. The unsatisfied body parts were thighs, abdomen and hip. 2. Significant differences in Satisfaction with apparel fit were found in skirt length, slacks length, thigh according to height and significant difference in satisfaction with apparel fit were found in armhole, abdomen, calf according to weight. 3. Significant differences in appearance management behaviors were not found according to height, but significant differences in diet, exercise and clothing use were found according to weight. Also significant differences in diet and clothing use were found according to R$\ddot{o}$hrer index.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.86-87
• /
• 1998

To understand the developmental process of the gait pattern from infancy to the adult, a gait analysis for a 14 months female infant has been performed for ten weeks. The gait parameters has been measured every other week since the week when she was able to walk without aid. The infant gait data at the tenth week of the test shows a similar pattern to the adult gait in many aspects including initial knee flexion, initial ankle dorsiflexion, the push-off pattern, etc. There is not a significant change in the hip flexion angle from week to week from the two weeks after the test started. To check the individuality in the collected data, more infant subjects are being tested presently.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.154-164
• /
• 2004

The purpose of this theses is to review Hanliu phenomenon, a kind of social and cultural phenomenon, in China around A. D. 2000 in the view of the culture-diffusion theory, and analyze its effect to the fashion style of the new young generation of China. In this theses, Hanliu phenomenon means the enthusiasm of Asian people for Korean mass cultures such as Korean dramas, pop songs and fashions from late 1990's. This research adopts two kinds of methods for analyzing Hanliu phenomenon: a qualitative research method and a quantitative one. As a qualitative research method, we analyzed Hanliu phenomenon with several sources of documentaries and audio-visual materials on it. As a quantitative research method, we conducted a survey of about 100 university students in Beijing for how they feel of korean culture and fashions. The Hanliu phenomenon leads to the popularity of Korean products and the general Korean cultures. Also, it affected the Chinese young generation so much that the Korean fashion becomes popular among them. Its effects to the fashion styles of Chinese youths can be summarized in three factors as follows. Firstly, the fashions of Korean entertainers such as H.O.T hair style and Hip-hop fashion style are widely imitated. Secondly, the preference of Korean fashion products has been widely increased. The number of stores dealing with Korean fashion products has been increased. Finally, Korean culture and products have actively been imitated in China according to the increased popularity of Korean fashion products.

• Corrosion Science and Technology
• /
• v.10 no.4
• /
• pp.136-142
• /
• 2011

Al alloys have been used widely for commercial and military ships in most ocean countries since mid-1950s, and the value as light metal with high mechanical strength has been proven. As the safety and fuel efficiency of Al ships have improved, she can carry more freight, sail faster and travel longer distances. Furthermore, in the shipbuilding industry, Al alloys are applied as structural materials for ships to various areas including the deck of luxurious cruises, battleships and leisure ships. In addition, Al alloys are being spotlighted as environmental-friendly material as they can be recycled even after end of lifespan. However, Al alloys for ships must be carefully selected after considering corrosion resistance, endurance, strength, and weldability in sea water environment. Al alloys to satisfy these conditions are used widely include 5000 series Al-Mg alloy and 6000 series Al-Mg-Si alloy. Thus, this study selected and evaluated the cavitation characteristics of the 5000 series Al alloys that are used in hulls that directly contact seawater and the 6000 Al alloys that are used in the upper structures of ships. Results of cavitation test with time, weightloss and cavitation rate of 5456-H116 showed the smallest damage among 5052-O, 5456-H116 and 6061-T6.