• Journal of Korea Port Economic Association
• /
• v.33 no.4
• /
• pp.83-98
• /
• 2017

Being in the globally competitive environment, public port enterprises which accentuate on the employment of excellent talents to procure competitive advantage are introducing the NCS(National Competency Standards)-based employment system that focuses on job skills. This study mainly aims to analyze the actual status of NCS utilization among public port enterprises and its usefulness as well as performance. The appropriateness, efficiency, satisfaction, comprehensiveness and performance of the current NCS - based employment system were analyzed by using collected data from the recruiting officers and new employees as subjects. And eventually an improvement plan was suggested. The result of analysis shows that the appropriateness and satisfaction level of NCS - based employment system are generally high; while its effectiveness, applicants' recognition and acceptance level as well as performance are slightly higher. Moreover, the job capability and performance on the job of new employee selected by the NCS employment system were analyzed to be higher when the appropriateness and satisfaction level of that system is high. In order to establish NCS - based employment system, early formulation and implementation of job performance assessment system to evaluate the actual abilities and performance of job is necessary. This study suggested the NCS - based employment system is effective for public port enterprises to procure excellent talents, as well as being useful for job preparation of job seekers according to the job competencies requirement of the enterprises. Therefore, this study contributes to the proliferation of NCS - based recruitment system.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.570-576
• /
• 2014

Palmitoyl tripeptide (M330) showed higher antimicrobial activities than methyl paraben or phenoxy ethanol through minimum inhibitory concentration (MIC) test. However, when the M330 was added into cosmetic formulation, white precipitates formed due to the electrostatic interaction between M330 and carbopol (carboxy vinyl polymer) as a thickener in cosmetics, and the viscosity of cosmetics decreased sharply. Also, the antimicrobial activities of M330 in cosmetics became lower than those of methyl paraben or phenoxy ethanol. Thus, the encapsulation of M330 in ethosome vesicle was attempted in order to recover the declined antimicrobial activities of M330 in cosmetics and prevent the precipitates from forming. When ethosome-encapsulated M330 was added into cosmetics, the precipitates did not form, and the decrease in the viscosity of cosmetics was not large compared to the addition of unencapsulated M330. Challenge tests showed that antimicrobial activities against gram negative bacteria were improved by the encapsulation of M330, but the encapsulation was not effective against gram positive bacteria and fungus. A combination of M330 with EDTA showed synergistic inhibitory potential against C. albicans. After coencapsulation of M330 and EDTA in ethosome, antimicrobial activities proved to be higher than those of unencapsulated M330 and EDTA.

• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.382-391
• /
• 2008

Yukwa samples, made with additions of 0, 10, 20, and 30% Rubus coreanus Miquel extract, were puffed by different puffing methods(convection oven, microwave oven, and fryer) and were then examined for quality characteristics such as moisture content, expansion rate, color, hardness, and sensory qualities, in order to determine the optimal ratio of Rubus coreanus Miquel extract in the formulation and the optimal expansion of Yukwa. The moisture contents of Yukwa base increased as the level of Rubus coreanus Miquel extract increased. And the Yukwa puffed by convection had higher moisture than the samples puffed by microwave oven or frying, with the exception of the sample containing 20% Rubus coreanus Miquel extract. When comparing the expansion rates of samples, no significant differences were found between the control and extract-containing samples puffed by convection, microwave, and frying methods, respectively. However, the sample puffed by frying had the highest expansion rate, whereas the convection-, microwave-puffed samples showed no significant differences. In the convection-, microwave-, and fryer-puffed samples, lightness and yellowness decreased, but redness increased, as the level of Rubus coreanus Miquel extract increased. And the sample puffed by microwave oven had greater lightness as compared to the samples puffed by convection and frying. In terms of hardness, no significant differences were found the control and extract-containing samples puffed by convection and microwave methods. However, hardness was maximal in the sample puffed by convection and lowest in the sample puffed by frying, in which it increased according to the addition of Rubus coreanus Miquel extract. In the consumer acceptance evaluations and characteristics intensity rating tests, the samples puffed using convection and microwave methods showed higher scores for the majority of evaluated characteristics as compared to the samples puffed by frying. And the samples containing Rubus coreanus Miquel extract obtained fairly good scores. In conclusion, the results indicate that additions of 10$\sim$20% Rubus coreanus Miquel extract are optimal for Yukwa that is puffed by convection and microwave methods, as this range provides good physiological properties and reasonably high overall consumer acceptability.

• Culinary science and hospitality research
• /
• v.15 no.1
• /
• pp.128-136
• /
• 2009

In this study, Korean wheat wet noodles were prepared with 1, 3, 5, and 7% pomegranate cortex powder(PGCP). The samples and a control were compared in terms of quality characteristics, including cooking properties, colors, textural characteristics, and sensory evaluation in order to determine the optimal ratio of PGCP in the formulation. With regard to the cooking properties, weight, volume, and water absorption decreased with PGCP content increased. As for colors, the PGCP content L, a, b value increased. For the textural characteristics, springiness and cohesiveness were not significantly different among the samples. The PGCP samples had significantly higher hardness, chewiness, brittleness, and gumminess than the control group. However, strength showed the reverse effect. In the sensory evaluation, the control group had significantly higher scores in colors, texture, and chewiness as compared to the PGCP samples. Overall acceptability decreased with PGCP content increased while bitterness, astringency, and off-flavor increased. Furthermore, saltiness and gumminess were not significantly different among the samples. In conclusion, the results show that 1% of PGCP was proved very useful as a substitute for Korean wheat flour in the production of wet noodles, providing good nutritional and functional properties.

• Korean Journal of Food Science and Technology
• /
• v.10 no.3
• /
• pp.306-312
• /
• 1978

Residue levels of an organochlorine insecticide, BHC, were determined for brown rice samples produced in Korea by collection and field experiments to obtain the following results. 1) Residue levels of total BHC in 112 samples (an Indica type variety Tongil) produced in 1976 and collected from 9 provinces in proportion to the production level of rice ranged from 0.0010 to 0.0762 ppm, the average being 0.0061 ppm. 2) The residue levels in samples from Jeonbook, Kyongnam and Choongnam provinces were higher than the average for whole samples. BHC isomers were found in the order of ${\alpha}>{\gamma}>{\beta}>{\delta}$ isomers, and the detection frequency by range were 89.3% below 0.01 ppm, 9.8% for $0.01{\sim}0.05{\;}ppm$ and 0.9% for $0.05{\sim}0.10{\;}ppm$. 3) In field experiments according to conventional agronomical practices, the brown rice samples after spraying of BHC at the first generation time of rice stem borer (4 kg of 6% granular formulation/10 a paddy field) showed a little higher residue level than control samples, but not more than 0.035 ppm, whereas samples after spraying at the second generation time (3 kg/10 a) contained in the range of $0.04{\sim}0.19\;ppm$.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.56-62
• /
• 1984

This experiment was carried out to investigate the effects of distilled water, pH, uv-irradiation, carrier, emulsifier and organic solvent on the stability of butachlor formulations in the course of storage. The uv-irradiation increased the decomposition rate of butachlor formulations in the order of emulsifiable concentrate, sand coated granular and zeolite adsorbed granular. Decomposition of butachlor emulsion was not affected by water and pH. Decomposition of butachlor emulsifiable concentrate which were prepared with various organic solvents at $50^{\circ}C$ was higher in the polar organic solvents than in the non-polar organic solvent. Decomposition of butachlor-emulsifiable concentrate emulsified in Tween-60 was higher than in Hy-620C or Newkalgen-MC.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.116-126
• /
• 1993

The finite element method(FEM) has been commonly used for structural dynamic analysis. However, the direct global application of FEM to large complex structures such as ships and offshore structures requires considerable computational efforts, and remarkably more in structural dynamic optimization problems. Adoption of the component-mode synthesis method is an efficient means to overcome the above difficulty. Among three classes of the component-mode synthesis method, the free-interface mode method is recognized to have the advantages of better computational efficiency and easier implementation of substructures' experimental results, but the disadvantage of lower accuracy in analytical results. In this paper, an advanced method to improve the accuracy in the application of the free-interface mode method for the vibration analysis of large complex structures is presented. In order to compensate the truncation effect of the higher modes of substructures in the synthesis process, both residual inertia and stiffness effects are taken into account and a frequency shifting technique is introduced in the formulation of the residual compliance of substructures. The introduction of the frequency shrift ins not only excludes cumbersome manipulation of singular matrices for semi-definite substructural systems but gives more accurate results around the specified shifting frequency. Numerical examples of typical structural models including a ship-like two dimensional finite element model show that the analysis results based on the presented method are well competitive in accuracy with those obtained by the direst global FEM analysis for the frequencies which are lower than the highest one employed in the synthesis with remarkably higher computational efficiency and that the presented method is more efficient and accurate than the fixed-interface mode method.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.407-418
• /
• 2023

This study conducted an analysis of terrain change indicators in major development projects in Korea, examining the correlation between terrain change indicators to derive foundational terrain change metrics based on different land use and slope types. The aim is to contribute to sustainable development by enhancing the efficiency of land utilization and landscaping, while minimizing environmental impacts in future development endeavors. Additionally, to apply the research findings in practical contexts, domestic regulations related to terrain were surveyed, and the compatibility and usability between these regulations and research analysis results were discussed. Based on this, the study seeks to explore strategies for more accurate and useful utilization of terrain change indicators in future research. As a result, in the tourism development, terrain changes predominantly occur in the order of flat land, hillly land, and mountain land, with the analysis indicating higher terrain changes in undulating hilly and mountainous lands compared to flat land. Furthermore, in industrial complex development, very steep (20°-30°) and extreme (30°-40°) slopes; in urban development projects, steep slope (15°-20°); in athletic service facility and tourist development, steep (15°-20°) and very steep (20°-30°) exhibit higher average terrain change indicators compared to other slope categories. The findings of our study can contribute to the formulation of strategies aimed at minimizing terrain disturbance in future domestic development projects and serve as foundational data for environmental impact assessments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.127-132
• /
• 2018

In this paper, a scheme for the evaluation of variability in the eigen-modes of functionally graded material(FGM) beams is proposed within the framework of perturbation-based stochastic analysis. As a random parameter, the spatially varying elastic modulus of FGM along the axial direction at the mid-surface of the beam is chosen, and the thru-thickness variation of the elastic modulus is assumed to follow the original form of exponential variation. In deriving the formulation, the first order Taylor expansion on the eigen-modes is employed. As an example, a simply supported FGM beam having symmetric elastic modulus with respect to the mid-surface is chosen. Monte Carlo analysis is also performed to check if the proposed scheme gives reasonable outcomes. From the analyses it is found that the two schemes give almost identical results of the mean and standard deviation of eigen-modes. With the propose scheme, the standard deviation shape of respective eigen-modes can be evaluated easily. The deviated mode shape is found to have one more zero-slope points than the mother modes shapes, irrespective of order of modes. The amount of deviation from the mean is found to have larger values for the higher modes than the lower modes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.116-126
• /
• 2016

In this study, lane-wise traffic flow characteristics were analysed on uninterrupted flow using a new notion of "lane-wise travel speed reversal (LTSR)" which is defined as a phenomena that travel speed in the median lane is lower than other lanes. Mathematical formulation was also proposed to calculate the strength of LTSR. The experiment road site is Seoul Outer Ring Expressway (Jayuro-IC~Jangsoo-IC), and travel trajectories for each four lane were collected for weekdays (Mon. through Fri.) during morning peak. Comparing lane-wise travel speeds for entire test road section, no LTSR was observed, meaning that the travel speed in the median lane is the fastest, followed by 2nd, 3rd, and 4th lane as in order. Howerver, the result of microscopic analysis using 100-meter discrete road section based data shows that LTSR occurs many times. Especially the strength of LTSR is higher in congestion area and freeway merge and diverge segment. It is expected that these results could be used as a fundamental data when establishing lane-by-lane traffic operation strategy and developing lane-wise traffic information collection and dissemination technology.