• Membrane Journal
• /
• v.27 no.4
• /
• pp.328-335
• /
• 2017

Fabricating photocatalytic composite membrane with a mesoporous and tailored morphological structure would have significant implication for environmental remediation. In this study, we reported hybrid $TiO_2$ immobilized photocatalytic membrane and its application for the treatment of dye solution. Photocatalytic film with high porosity and homogeneity was fabricated by graft copolymer as polymer template. Hybridization of membrane filtration with photocatalysis was successfully achieved by photocatalytic membrane reactor developed. Result showed that membrane permeability was significantly reduced after immobilizing the $TiO_2$ film on bare $Al_2O_3$ support. The membrane characterization indicated that well organized $TiO_2$ film was successfully formed on $Al_2O_3$ support. Benefiting from the controlled morphology of $TiO_2$ film, the composite membrane exhibited almost complete degradation of organic dye within 5 h of filtration under UV illumination. Langmuir-Hinshelwood model explained degradation of organic dye. First-order rate constant was approximately six times with $TiO_2$ immobilized composite ceramic membrane, higher than the one with the bare $Al_2O_3$ support (0.0081 vs. $0.0013min^{-1}$).

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.59-72
• /
• 1985

This paper deals with the numerical analysis by the (mite element method introducing Biot's theory of consolidation and the modified Cambridge model proposed by Roscoe school of Cambridge University as constitutive equation and using Christian-Boehner's technique. Especially, time interval and division of elements are investigated in vies of stability and economics. In order to check the validity of author's program, the program was tested with one-dimensional consolidation case followed by Terzaghi's exact solution and with the results of the Magnan's analysis for existing banking carried out for study at Cubzac-les-ports in France. The main conclusions obtained are summarized as follows: 1. In the case of one-dimensional consolidation, the more divided the elements are near the surface of the foundation, the higher the accuracy of the numerical analysis is. 2. For the time interval, it is stable to divide 20 times per 1-lg cycle. 3. At the element which has long drain distance, the Mandel-fryer effect appears due to time lag. 4. Lateral displacement at an initial loading stage predicted by author's program, in which the load was assumed as not concentrative. but rather in grid form, is well consistent with the value of observation. 5. The pore water pressure predicted by author's program has a better accordance with the value of observation compared with Magnan's results. 6. Optimum construction control by Matsuo-Kawamura's method is possible with the predicted lateral displacement and settlement by the program.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.161-167
• /
• 2011

Recent popularity in mobile electronics requires higher standard on the mechanical strength of electronic packaging. Thus, the method of soldering between chip and substrate in electronic packaging process is changing from conventional method using intermetallic compound to a new method using organic solderability preservatives (OSP) in order to improve the stability and the reliability of final product. Since current OSPs have several serious problems like thermo-stability during packaging process, however, it is necessary to develop new OSPs having thermo-stability. The main purpose of this study is to develop various thermo-stable OSPs based upon poly(vinyl pyridine-co- methylmethacrylate) and to evaluate their anti-oxidation property protecting Cu pad, thermo-stability and solubility to acid- or alcohol-containing aqueous solution during pos-fluxing. All OSPs showed not only good anti-oxidation property, thermo-stability and solubility but also more advantages like low cost, less odor, and less hygroscopic.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1139-1146
• /
• 2012

An alternative approach for topology optimization of steady incompressible Navier-Stokes flow problems is presented by using P1 nonconforming finite elements. This study is the extended research of the earlier application of P1 nonconforming elements to topology optimization of Stokes problems. The advantages of the P1 nonconforming elements for topology optimization of incompressible materials based on locking-free property and linear shape functions are investigated if they are also valid in fluid equations with the inertia term. Compared with a mixed finite element formulation, the number of degrees of freedom of P1 nonconforming elements is reduced by using the discrete divergence-free property; the continuity equation of incompressible flow can be imposed by using the penalty method into the momentum equation. The effect of penalty parameters on the solution accuracy and proper bounds will be investigated. While nodes of most quadrilateral nonconforming elements are located at the midpoints of element edges and higher order shape functions are used, the present P1 nonconforming elements have P1, {1, x, y}, shape functions and vertex-wisely defined degrees of freedom. So its implentation is as simple as in the standard bilinear conforming elements. The effectiveness of the proposed formulation is verified by showing examples with various Reynolds numbers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.285-291
• /
• 2015

Purpose: The hydrogel lenses have been functionalized with HA(Hyaluronic Acid) using two different methods: construction of an IPN(Interpenetrating Polymer Networks) and formation of CCB(Chemical Covalent Bonding). The lysozyme adsorption and physical properties such as optical transmittance and water content of the hydrogel lenses have been investigated in order to determine whether method is suitable for the application potentials in contact lens industry. Methods: HA have been added to the hydrogel lenses prepared in the Lab using the two different method, e.g. IPN and CCB. The optical transmittance was measured in the wavelength range of 300~800 nm. The water content was measured by the gravimetric method using 0.9% NaCl saline solution. The amounts of adsorbed lysozyme on the contact lenses was analyzed by HPLC after incubation for 12h in artificial tears. Results: The water content of the HA added hydrogel contact lenses was increased, and the lens made by IPN method showed higher water content than the lens made by CCB method. The optical transmittance was over 90% both before and after addition of HA. Comparing the lysozyme adsorption reduction ratio, contact lens manufactured by IPN method was 60.0%, and the lens made by CCB method was 40.4%. Conclusions: CCB method is appropriate to distribute the functional material evenly throughout the lens, whereas IPN method is effective for the case of giving the functionality on the lens surface without phase separation.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.543-547
• /
• 2006

In order to improve wine quality, the selection of yeast strain and of additives in the manufacture of Bokbunja (Rubus coreanus Miq.) wine was investigated. The chemical composition of the edible portions of Bokbunja fruits was 86.5% moisture, 0.2% crude protein, 0.9% crude fat, 6.6% crude fiber, 0.5% ash and $10^{\circ}Brix$ sugar, and was 2.99% fructose, 2.53% glucose and 0.07% sucrose in fruit extract. The predominant organic acids in the fruit were citric acid (14.57 mg/mL) and malic acid (2.24 mg/mL) with smaller amounts of shikimic, pyroglutamic and oxalic acid. During fermentation, citric and malic acid levels decreased, while formic and acetic acid were released. Saccharomyces cerevisiae KCCM 12224 (Sc-24) was more favorable for alcoholic fermentation of Bokbunja and the addition of 200 ppm of potassium metabisulphite to must was more efficient than other $SO_2$ sources with a higher overall acceptability score. Sc-24 increased alcohol production from 9.8 to 14.8% in a sugar concentration dependent manner $(18-28^{\circ}Brix)$. The color value of early stage Bokbunja must was improved by supplementing with Japanese apricot extract, but this did not influence the color value of Bokbunja wine after primary fermentation. The astringent taste of Bokbunja wine was reduced by removing the seed from the fruit. Sugar solution (50%, w/v) was used instead of sugar power to prevent the possibility of undissolved sugar due to insufficient mixing. This substitution did not influence sensory evaluation.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.2
• /
• pp.128-133
• /
• 2000

This study was conducted to investigate the adsorptive characteristics with cadmium in different levels of organic matter and lime in soil. And in order to identify the effect of soil ameliorators on cadmium uptake in rice plants, compost and lime were treated. Plants were grown at two soil textures(sandy loam and clay loam) with irrigation water containing $0.01\;mg\;L^{-1}$ of cadmium and treatments of two irrigation systems(intermittent irrigation and continuous submersion). The adsorption capacity of cadmium by soil was increased in proportion to initial concentration of solution, and it was higher at clay soil compared to loamy soil. The adsorption rate of cadmium by soil was increased with increasing the concentration of organic matter and lime in soil, highly increased at the both organic matter and lime treatment. Soil pH was negatively correlated with the cadmium contents of the both shoot and brown rice while Eh was positively correlated with those. In the harvest season, cadmium contents in the both leaves and brown rice were lower in the clay sail plots than sandy soil plots, and the continuous submersion plots were lower than intermittent irrigation plots. Cadmium uptake was highly reduced at the compost and lime mixture plot compared to other treatments among the continuous submersion plots. The cadmium content of shoot was positively correlated with that of brown rice in the harvest season.

• Korean journal of food and cookery science
• /
• v.6 no.4 s.13
• /
• pp.33-39
• /
• 1990

Rice and waxy rice starches were adjusted to 27% of moisture and heated at $100^{\circ}C$ for 16hours, respectively. After the treatment, their gelatinization properties were investigated. The initial gelatinization temperature, obtained by transmittance and amylogram, of Akkibare and Taebaek starches were $60{\sim}65^{\circ}C$ but those of waxy rice and the U.S.A. rice starches were $55{\sim}60^{\circ}C$ and $70{\sim}75^{\circ}C$, respectively. The gelatinization temperatures of heat-moisture treated starches were higher than those of the untreated starches. Viscosities at each temperature and the highest viscosity reduced by some degrees after the treatment. DSC thermograms of all starches showed single endotherm and the gelatinization enthalpies were $2.26{\sim}2.63\;cal/g$. The gelatinization enthalpy tended to decrease after the treatment. Transmittance and viscosity by alkali showed in this order; Akkibare and Taebaek starches>waxy starch>the U.S.A. rice starch. The heat-moisture treated starches increased viscosities in every starch. Transmittance in alkali solution of Akkibare, Taebaek and waxy rice starches decreased. but that of the U.S.A. rice search increased.

• Journal of Radiation Protection and Research
• /
• v.24 no.2
• /
• pp.73-86
• /
• 1999

The ion-exchange method for the purification of primary coolant has been used broadly in PWR(pressurized water reactor)-type nuclear power plants due to its high decontamination efficiency, simple system, and easy operation. However, its non-selective removal of metal and non-radionuclides shortens its life, resulting in the generation of a large amount of waste ion-exchange resin. In this study, the feasibility of electrodeionization (EDI) was investigated for the purification of primary cooling water using synthetic solutions under various experimental conditions as an alternative method for the ion exchange. The results shows that as the feed flow-rate increased, the removal efficiency increased and the power consumption decreased. The removal rate was observed as a 1000 decontamination factor(DF) at a nearly constant level. For the synthetic solution of 3 ppm TDS (Total Dissolved Solid), the power consumption was 40.3 mWh/L at 2.0 L/min of feed flow rate. The higher removal rate of metal species and lower power consumption were obtained with greater resin volume per diluting compartment. However, the flow rate of the EDI process decreased with the elapsed time because of the hydrodynamic resistivity of resin itself and resin fouling by suspended solids. Thus, the ion-exchange resin was replaced by an ion-conducting spacer in order to overcome the drawback. The system equipped with the ion-conducting spacer resolved the problem of the decreasing flow rate but showed a lower efficiency in terms of the power consumption, the removal rate of metal species and current efficiency. In the repeated batch operation, it was found that the removal efficiency of metal species was stably maintained at DF 1000.