• Korean Journal of Adult Nursing
• /
• v.26 no.6
• /
• pp.642-652
• /
• 2014

Purpose: The purpose of this study was to compare the role-expectations of gerontological nurse practitioners and performance of gerontological nursing by nurses in long term care hospitals and general hospitals. Methods: Subjects were 200 nurses; 100 nurses from long term care hospitals where as 100 nurses from general hospitals. The subjects completed a questionnaire on general characteristics, role-expectations of gerontological nurse practitioners, and performance of gerontological nursing by nurses. Data were collected from February to March 2013 and analyzed using SPSS/WIN 18.0 version program in order to perform descriptive statistics, independent t-test, and one-way ANOVA. Results: Results indicated that there were significant differences in the role-expectations of gerontological nurse practitioners and performance of gerontological nursing between nurses from long term care hospitals and those from general hospitals. Conclusion: Nurses in general hospitals showed significantly higher role expectations than nurses in long term care hospitals. Therefore it is necessary to spread the knowledge on the roles of gerontological nurse practitioners and the nurse practitioners system to nurses in long term care hospitals.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.4
• /
• pp.477-489
• /
• 2015

Purpose: The purpose of this study was to develop an instrument to assess emergency room nurses' knowledge and performance of triage nursing. Methods: The instrument was developed through the stages of conceptual construction, item development, and validity and reliability testing. For the validity and reliability testing, data collected from 48 emergency room nurses using questionnaires was analyzed through descriptive statistics, factor analysis, and reliability coefficients. Results: The knowledge part consisted of 30 items in nine areas, and its reliability was low (KR-20 =0.50). The correct-answer rate was 71.8%. The performance section derived from the factor analysis was composed of two factors with nine items in the triage domain and three factors with 12 items in the non triage domain. The explanatory powers of these factors for the domains were 66.1% and 70.4%, respectively. The overall reliability (Cronbach's ${\alpha}$) was .95, and the reliabilities for the two domains were .88 and .91, respectively. The nurses' mean performance level was 3.2(${\pm}0.45$). Conclusion: The specific contents of the triage nursing work were identified from the developed scale; further research is necessary to in order to develop a scale capable of higher reliability and validity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.219-224
• /
• 2015

Recently, the multi-core processor architecture is widely used in the digital signal processors for enhancing its performance. Multi-core processors are classified either as symmetric or asymmetric. Asymmetric multi-core processors are known to have higher performance and more efficient than symmetric multi-core processors. In order to study the performance enhancement of asymmetric multi-core digital signal processors over the symmetric ones, the trace-driven simulation has been executed for various asymmetric quad-core, octa-core and hexadeca-core digital signal processors and compared with the symmetric ones of similar hardware budget using UTDSP benchmarks as input.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.6 no.2
• /
• pp.15-22
• /
• 2010

The natural refrigerants have used into HVAC equipments because the CFCs and HFCs have some environmental problems like high ODP and GWP. The carbon dioxide has small effect on the environmental problem but also good thermodynamics properties. In this study, the simulation study on the performance and characteristics of a $CO_2$ gascooler and evaporator using a fin-tube and microchannel heat exchanger has been conducted. Besides, the comparison of performance with operating condition was carried out in order to apply to the $CO_2$ heat pump system. As a result, the front sizes of a gascooler and evaporator using a microchannel were decreased by 63% and 58%, respectively, compared to those using a fin-tube. The performance of the fin-tube gascooler and evaporator were more responsive to the variation of operating conditions compared to that of microchannel. The pressure drop of a fin-tube heat exchanger was higher than that of a microchannel one.

• New & Renewable Energy
• /
• v.2 no.3
• /
• pp.15-22
• /
• 2006

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new market penetration using the distributed generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection standards. KEPCO, a government company in Korea, has performed the project to identify and evaluate the performance of Micro Gas Turbine(MGT) technologies focused on 30, 60kW-class grid-connected optimization and combined Heat & Power performance. This paper describes the results for the mechanical, electrical, and environmental tests of MGT on actual grid-connection under Korean regulations. As one of the achievements, the simulation model of Exhaust-gas Absorption Chiller was developed, so that it will be able to analyze or propose new distributed generation system using MGT. In addition, KEPCO carried out the field testing of the MGT Cogeneration system at the R&D Center Building, KEPCO. The field test was conducted in order to respond to a wide variety of needs for heat recovery and utilization. The suggested method and experience for the evaluation of the distributed generation will be used for the introduction of other distributed generation technologies into the grid in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.233-238
• /
• 2016

Recently, the multi-core processor architecture is widely adopted in the embedded processors for enhancing its performance. Multi-core processors are classified either as symmetric or asymmetric. Asymmetric multicore processors are known to score higher performance and more efficient than symmetric multi-core processors. In order to study the performance enhancement of asymmetric multi-core embedded processors over the symmetric ones, the trace-driven simulation has been executed for various asymmetric embedded dual-core, quad-core, octa-core and hexadeca-core processors and compared with the symmetric ones of similar hardware budget using MiBench benchmarks as input.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.524-530
• /
• 2012

Laying hens were fed commercial diets added with supplemented fat (SFAT) at 0.6, 1.2, and 1.8% in order to study the long term dietary effects - on - their productive performance from 22 to 75 wk of age. Five hundred and seventy six Single Comb White Leghorn hens were assigned to one of the four dietary treatments. The experimental phase consisted of three periods of 18 wk each. The final body weight and gain of hens fed on diets with SFAT at 1.2% and 1.8% were lower (p<0.05) than those hens given no SFAT. The SFAT at the 1.2% and 1.8% levels improved egg production rate, egg weight and mass, as well as FCR. Mortality and feed consumption were not affected by dietary SFAT. Administration of a diet with SFAT significantly decreased the cracked-broken egg ratio (p<0.01). The beneficial effects of SFAT on egg production performance were particularly more pronounced at intermediate and later ages. Hence, SFAT by period interactions were significant for all traits studied except feed intake. Hens fed SFAT deposited significantly higher abdominal fat than those on the no-SFAT diet. As a result, SFAT at 1.2% and 1.8% inclusion levels provided benefits in terms of efficient table egg production.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.25-32
• /
• 2010

This study was carried out to evaluate the performance of three kinds of single process (electrolysis, UV and ultrasonic process) for the purpose of disinfection of Escherichia coli in water. Among the five kinds of electrode material, disinfection performance of Ir electrode was higher than that of the other electrodes. The order of disinfection performance for E. coli in single process lies in: electrolysis > UV $\gg$ ultrasonic process. Performance of the three single processes was increased with the increase of the electric power. Disinfection efficiency of the three processes was increased with the decrease of the pH. Disinfection of the UV process were decreased by the increase of NaCl dosage and air flow rate. However, ultrasonic process was not affected above two parameters. OH radical was not produced in UV and ultrasonic process. E. coli disinfection of the electrolysis process was well agreed with RNO degradation tendency, except pH.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.191-198
• /
• 2011

Based on the consideration that the cavitation would affect the operation stability of miniature pumps, the 3-D turbulent cavitating flow in a test pump was simulated by using a mixed cavitation model and k-${\omega}$ SST turbulence model. In order to investigate the influence of inlet geometry parameters on the cavitation performance of the miniature pump, two more impellers are designed for comparison. Based on the results, the following conclusions are drawn: 1) Cavitation performance of the double suction shaft-less miniature pump having different impeller is equivalent to the centrifugal pump having ordinary size, though the flow passage at impeller inlet is small; 2) The miniature pump having radial impeller can produce much higher pump head, but lower cavitation performance than that having the impeller based on the conventional design method; 3) It is believed that by applying the double suction design, the miniature pump achieved relatively uniform flow pattern upstream the impeller inlet, which is favorable for improving cavitation performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.485-488
• /
• 2005

The comparison of 3 conventional binarization methods for insect footprints and the result of performance evaluation using a proposed performance criterion are introduced in this paper. The 3 different binarization algorithms for comparison are based on different category each, and the proposed performance criterion is based on the characteristics of insect footprints which have very smaller foreground area than background area. In the experiments, average performance results using 71 test images are compared and analyzed. The higher-order entropy binarization algorithm proposed by Abutaleb showed the best result for pattern recognition applications of insect footprints.