• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.73-78
• /
• 1990

In current practice of earthquake resistant design the equivalent lateral force procedure is widely used for its simplicity and convenience. But the equivalent lateral force procedure is derived based on the assumption that the dynamic behavior of the structure is governed primarily by the fundamental vibration mode. Therefore proper prediction of dynamic responses of the structure is unreliable using the equivalent lateral force procedure when the effect of higher vibration modes on the dynamic behavior is negligible. In this study design seismic load which can reflect the effect of higher vibration modes is proposed from the point of view of proper assessment of story shears which have the major influence on the design moment of beams and columns. To evaluate the effect of higher modes, differences between the story force based on the equivalent lateral force procedure specified in current earthquake resistance building code and the one based on modal analysis using design spectrum are examined. From these results improved design seismic load for the equivalent lateral force procedure which can reflect the effect of higher vibration modes is proposed.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.503-508
• /
• 1997

The effect of rotary inertia of concentrated masses on the natural vibration of the simply supported-simply supported fluid conveying pipe has been studied. For the analysis Galerkin's method is used fer transformation of the governing equation to the eigenvalue problem and the natural frequencies and mode shapes for the system have been found. Introduction of rotary inertia results in lots of change on the natural frequencies and mode shapes and its effect is highly noticed at the higher natural frequencies and mode shapes. Consideration of rotary inertia results in much decrease on the natural frequencies and its neglect could lead to erroneous results.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.94-101
• /
• 2015

This paper presents findings on the second-order sliding-mode controller for a nuclear research reactor. Sliding-mode controllers for nuclear reactors have been used for some time, but higher-order sliding-mode controllers have the added advantage of reduced chattering. The nonlinear model of Pakistan Research Reactor-1 has been used for higherorder sliding-mode controller design and performance evaluation. The reactor core is simulated based on point kinetics equations and one delayed neutron groups. The model assumes feedback from lumped fuel and coolant temperatures. The effect of xenon concentration is also considered. The employed method is easy to implement in practical applications, and the second-order sliding-mode control exhibits the desired dynamic properties during the entire output-tracking process. Simulation results are presented to demonstrate the effectiveness of the proposed controller in terms of performance, robustness, and stability.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.101-110
• /
• 2018

This paper introduces feedback linearization (FL) based adaptive sliding mode control (ASMC) effective against ground effects of the quadrotor UAV. The proposed control has the capability of estimation and effective rejection of those effects by adaptive mechanism, which resulting stable attitude and positioning of the quadrotor. As output variables of quadrotor, x-y-z position and yaw angle are chosen. Dynamic extension of the quadrotor dynamics is obtained for terms of roll and pitch control input to be appeared explicitly in x-y-z dynamics, and then linear feedback control including a ground effect is designed. A sliding mode control (SMC) is designed with a class of FL including higher derivative terms, sliding surfaces for which is designed as a class of integral type of resulting closed loop dynamics. The asymptotic stability of the overall system was assured, based on Lyapunov stability methods. It was evaluated through some simulation that attitude control capability is stable under excessive estimation error for unknown ground effect and initial attitude of roll, pitch, and yaw angle of $30^{\circ}$ in all. Effectiveness of the proposed method was shown for quadrotor system with ground effects.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.117-123
• /
• 2020

In this study, the effect of the pre-mild wear mode test condition on the subsequent severe wear behavior of carbon steel has been investigated when the wear mode is varied according to the sliding speed change during sliding contact. Two sliding speeds of 0.3 m/s and 3 m/s for the mild wear mode test have been chosen and a sliding speed of 1 m/s for the severe wear mode test. A mild wear mode test at two different sliding speeds has been carried out during the severe wear mode test and total sliding distance of the mild wear mode test has been changed at this time. As a result, it could be found that the wear rate of carbon steel under the severe wear mode test after performing a pre-mild wear mode test is significantly reduced, compared with that before performing. However, its wear rate was slightly higher than that under the mild wear mode test. Oxides produced during the pre-mild wear mode test have been found to play a significant role in reducing the wear rate under the subsequent severe wear mode test. In particular, it was found that the effect of a pre-mild wear mode test performed at the sliding speed of 3 m/s has more rapid and the reduction in the wear rate was greater than thst at the sliding speed of 0.3 m/s.

• 한국HCI학회논문지
• /
• 제14권1호
• /
• pp.35-43
• /
• 2019

본 연구에서는 챗봇 기반 인터페이스 이용 시 상호작용성과 사용 모드가 어떻게 사용자 경험에 영향을 미치는지에 대하여 알아보았다. 챗봇은 인공지능 및 자연어 처리 기술의 향상에 힘입어 빠른 속도로 상용화되고 있다. 하지만 대부분의 연구가 챗봇의 성능을 높이기 위한 기술적 측면에만 집중된 실정으로, 사용자 경험 측면의 연구가 시급하다. 이에 본 연구에서는 챗봇 인터페이스의 사용자 경험 양상을 살피기 위하여 인터페이스의 '상호작용성' 수준과 사용자의 인터페이스 상황인 '사용 모드'가 어떻게 사용자의 만족, 몰입, 지각된 유용성에 영향을 미치는지 살펴보았다. 연구 결과 상호작용성은 그 수준이 높을수록 더 높은 사용자 경험을 환기했다. 또한 사용 모드는 주 효과를 보이지는 않았지만, 상호작용성과 몰입에 대하여 상호작용 효과를 나타냈는데, 구체적으로 사용자의 인터페이스 사용 목표가 뚜렷한 상황 속에서 상호작용성이 높을 경우 몰입이 최대로 올라간다는 결과가 도출되었다. 이를 통해 긍정적인 사용자 경험을 이끌어 낼 수 있는 챗봇 인터페이스를 디자인하기 위해서는 상호작용성을 반드시 고려해야 하며, 구체적 목적을 수행하길 원하는 사용자에게는 쉽게 과업을 달성할 수 있도록 추가적 기능을 제공해야 한다는 사실을 밝혀내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.66-69
• /
• 2001

Effect of $N_2$ flow rate on properties of GaN thin films grown by plasma-enhanced molecular beam epitaxy(PEMBE) was discussed to optimize the quality of thin films. It was found that at low $N_2$ flow rate indicating high III/V flux ratio, the growth rate of GaN thin films was controlled by $N_2$ flux, and at high $N_2$ flow rate the growth rate was not controlled by $N_2$ flux any longer. It was also found that III/V flux ratio affected film quality. The film grown at higher $N_2$ flow rate showed low background carrier concentration, higher carrier mobility, and narrow FWHM in band-edge emission of low temperature PL. It is thought that the film in more Ga flux region was grown by 2-dimensional layer-by-layer growth mode, and the film in more nitrogen region was grown by 3-D island growth mode. All samples exhibited a good crystallinity.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권2호
• /
• pp.213-218
• /
• 2017

최근 고위험 임신군이 증가함에 따라 과거에 비해 음향파워 세기가 높은 도플러초음파 이용이 산전 진단에서 점차 증가하고 있으며, 여러 기관에서 가이드라인을 설정하여 과도한 노출을 자제하고 있다. 따라서 본 연구에서는 장시간 초음파검사 실시에 따른 검사모드 별 체표면의 온도변화를 알아보고 열효과에 영향을 받지 않는 노출시간을 고찰해 보고자 하였다. 시간경과에 따른 B mode, C mode, PD mode 별 초음파를 조사한 부위와 조사하지 않은 부위의 온도변화를 측정하여 차이를 비교하였으며 B mode는 초음파 조사 후 10분, 50분에서, C mode는 20분부터, PD mode는 30분부터 온도변화에 유의한 차이를 나타내었다(p<0.01). 측정시점에 따라 3개의 mode에서 모두 온도상승에 차이를 보였으며(p<0.000), PD mode가 가장 온도변화에 민감한 반응을 나타내었다. 또한 초음파 노출시간이 증가함에 따라 온도상승 시간이 짧아짐을 알 수 있었다. 따라서 배아나 태아를 관찰하기 위한 초음파검사 시 과도한 검사시간을 피하여 진단목적으로만 신속하게 사용할 것을 권고한다.

• 한국광학회지
• /
• 제25권6호
• /
• pp.340-345
• /
• 2014

본 논문에서는 금이 증착된 측면연마 광섬유를 $2{\mu}m$ 대역 편광기로 이용하여 Thulium/Holmium 첨가 광섬유 기반 링 캐비티로부터 모드 잠금 레이저를 구현할 수 있음을 실험적으로 보였다. 모드 잠금 현상은 광섬유로 구성된 공진기 내부에서 진행하는 빔이 겪는 Nonlinear Polarization Rotation 현상에 기반하여 삽입된 금 증착 측면연마 광섬유에서 발생되는 Nonlinear Transmission 반응에 의해 유도되었다. 또한 공진기로부터 발생되는 출력 $1.93{\mu}m$ 파장의 광펄스를 Thulium/Holmium 첨가 광섬유 증폭기를 통과시켜 Higher Order Soliton Effect를 통해 압축시킴으로써 최대 첨두 출력 ~6.7 kW를 갖는 펄스폭 ~558 fs의 고출력 펨토초 펄스를 얻을 수 있음을 실험적으로 보였다.