• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.275-280
• /
• 2002

To study of high volume fly -ash concrete replace cement and fine aggregate together. Proportion consideration economy cost and performance improve replacement high volume fly-ash. Experimentation study of high-strength which cement about fly-ash replacement maximum 50%Flash concrete tested slump, air contest, setting and Hardening concrete tested day of age 1, 3, 7, 28, 91 compression strength in underwater curing. Purpose of study is consultation materials in field that variety of fly ash replacement concrete mix proportion comparison and valuation.

• Culinary science and hospitality research
• /
• v.3
• /
• pp.165-179
• /
• 1997

Cost-volume-profit analysis shows the relationship between these factors. The figures expressed in a break-even chart can be used planning control and decision making. The relation ships can also be helpful in understanding how all costs must be covered in menu pricing. Involved in these relationship is the contribution to overhead and profit, or contribution ratio. This study used the food service operation of H hotel. Assumed the FC would be 10% of the High Volume, the VC would be 76% of the high volume. And in the CVP of individual meals, selected labor cost of the VC, assumed labor cost would be 35% of the volume.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.11-18
• /
• 1997

Scientific volume visualization addresses the representation, manipulation, and rendering of volumetric data sets, providing mechanisms for looking closely into structures and understanding their complexity and dynamics. In the past several years, a tremendous amount of research and development has been directed toward algorithms and data modeling methods for a scientific data visualization. But there has been very little work on developing a mathematical volume model that feeds this visualization. Especially, in flow visualization, the volume model has long been required as a guidance to display the very large amounts of data resulting from numerical simulations. In this paper, we focus on the mathematical representation of volumetric data sets and the method of extracting meaningful information from the derived volume model. For this purpose, a B-spline volume is extended to a high dimensional trivariate model which is called as a flow visualization model in this paper. Two three-dimensional examples are presented to demonstrate the capabilities of this model.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.19-24
• /
• 2016

Several researches on high volume fly ash concrete have been conducted to investigate its fundamental material properties such as slump, strength and durability and however, research on the structural behavior of bond strength is essential for the application of this high volume fly ash concrete to structural members because of the necessity of reinforcement. But the exact design code for application and researches on the bond behavior of high volume fly ash concrete lack yet. To achieve such a goal, this paper evaluates experimentally the bond behavior of high volume fly ash concretes by direct pull-out test and compares between the current test results and existing research results. By the test results, it is shown that the bond behavior of high volume fly ash concrete is similar to that of general concrete. And by the comparison between test and existing research, it is shown that bond stress of high volume fly ash concrete is underestimated, as the embedment length gets longer.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.1
• /
• pp.13-20
• /
• 2006

Objectives: To propose a risk-adjustment model with using insurance claims data and to analyze whether or not the outcomes of non-emergent and isolated coronary artery bypass graft surgery (CABG) differed between the low- and high-volume hospitals for the patients who are at different levels of surgical risk. Methods: This is a cross-sectional study that used the 2002 data of the national health insurance claims. The study data set included the patient level data as well as all the ICD-10 diagnosis and procedure codes that were recorded in the claims. The patient's biological, admission and comorbidity information were used in the risk-adjustment model. The risk factors were adjusted with the logistic regression model. The subjects were classified into five groups based on the predicted surgical risk: minimal (<0.5%), low (0.5% to 2%), moderate (2% to 5%), high (5% to 20%), and severe (=20%). The differences between the low- and high-volume hospitals were assessed in each of the five risk groups. Results: The final risk-adjustment model consisted of ten risk factors and these factors were found to have statistically significant effects on patient mortality. The C-statistic (0.83) and Hosmer-Lemeshow test ($x^2=6.92$, p=0.55) showed that the model's performance was good. A total of 30 low-volume hospitals (971 patients) and 4 high-volume hospitals (1,087 patients) were identified. Significant differences for the in-hospital mortality were found between the low- and high-volume hospitals for the high (21.6% vs. 7.2%, p=0.00) and severe (44.4% vs. 11.8%, p=0.00) risk patient groups. Conclusions: Good model performance showed that insurance claims data can be used for comparing hospital mortality after adjusting for the patients' risk. Negative correlation was existed between surgery volume and in-hospital mortality. However, only patients in high and severe risk groups had such a relationship.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.1
• /
• pp.20-23
• /
• 2004

BLDCMs are widely used in many industries. In certain specialized areas, they need to have high efficiency, high power rate and produce a low volume of noise, etc. In this study, a new type of slotless BLDCM is proposed that has no cogging torque, low iron loss and low volume as compared to commonly used BLDCMs. With a high performance magnet and coreless compact winding structure similar to those employed in linear synchronous motors, motor volume is reduced. The proposed motor has been put been through various experiments arid has demonstrated acceptable results for industry applications.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.169-172
• /
• 2000

Direct volume rendering has yet been restricted to high-end graphic workstations and special-purpose hardware, due to the large amount of trilinear interpolation, that are necessary to obtain high image quality. In this paper, we implemented the volume rendering techniques using the 2D-texture at the environment of standard PC hardware. In addition, we show how multi-texturing capabilities of modern PC graphics board are enable to volume rendering. Besides using extended OpenGL function, we improved pixel operations and rendering capacity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.67-78
• /
• 2010

This paper analyzes how to measure breast volume and the change in breast volume after wearing a brassiere. Measurement using a breast replica is used to measure the breast volume of 41 women in their twenties. The rate of persons having flat and hemispherical breast are high. The majority of subjects are size 75A, 80A, and 75B, and their under-bust size is 70. The current size specification should be refined for fitting according as the girth under bust decreases. The correlation between breast volume and the circumference of the breasts was high. It was more reliable to set up the cup size of a brassiere using the breast circumference. The mean breast volume is 263.68cc (nude) and the total volume wearing brassiere is 342.05cc. The volume difference according to wearing a brassiere is 78.37cc, which is less than the brassiere volume itself. The results show, the less breast volume of a subject, then the greater volume in wearing a brassiere.

• Advances in concrete construction
• /
• v.12 no.5
• /
• pp.367-375
• /
• 2021

This study experimentally investigated the improvement of bond strength and durability of concrete containing high volume fly ash. Concrete mixtures made with 0%, 25% and 60% replacement of cement with class F fly ash were prepared. Water-binder ratios ranged from 0.28 to 0.72. The compressive, flexural and pullout bond strength, the resistance to chloride-ion penetration, and the water permeability of concrete were measured and presented. Test results indicate that except for the concretes at early ages, the mechanical properties, bond strength, and the durability-related chloride-ion permeability and water permeability of concrete containing high volume (60% cement replacement) fly ash were obviously superior to the concrete without fly ash at later ages of beyond 56 days. The enhanced bond strength for the high volume fly-ash concrete either with or without steel confinement is a significant finding which might be valuable for the structural application.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.237-240
• /
• 2004

High strain-rate deformation behavior of NiAl/Ni micro-laminated composites was characterized by split hopkins on pressure bar(SHPB). When the strain rate increased, the compressive stress of micro-laminated composites were increased a little. When the intermetallic volume fraction increased, the compressive stress of micro-laminated composites increased linearly irrespective of strain rate. Absorbed energy during the quasi-static and SHPB tests was calculated from the integrated area of stress-strain curve. Absorbed energy of micro-laminated composites deviated from the linearity in terms of the intermetallic volume fraction but merged to the value of intermetallic as the strain rate increased. This was due to high tendency of intermetallic layer for the localization of shear deformation at high strain rate. Microstructure showing adibatic shear band(ASB) confirmed that the shear strain calculated from the misalignment angle of each layer increased and ASB width decreased when the intermetallic volume fraction. Simulation test impacted by tungsten heavy alloy cylinder resulted that the absorbed energies multiplied by damaged volume of micro-laminated composites were decreased as the intermetallic volume fraction increased. Fracture mode were changed from delamination to single fracture when the intermetallic volume fraction and this results were good matched with previous results[l] obtained from the fracture tests.