• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.156-168
• /
• 2023

This study investigates the high temperature oxidation behaviour of a Ni-20Cr-1.2Si (wt.%) alloy in steam from 1200 ℃ to 1350 ℃ by Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS) and X-ray Diffraction (XRD). The results demonstrate that exposed Ni-based alloy developed a thin oxide scale, consisted mainly of Cr₂O₃. The oxidation kinetics obtained from the experimental results was applied to evaluate the hydrogen generation considering a simplified reactor core model with different cladding alloys following an unmitigated Loss-Of-Coolant Accident (LOCA) scenario in a hypothetical Small Modular Reactor (SMR). Overall, experimental data and simulations results show that both Fe-based and Ni-based alloys may enhance cladding survivability, delaying its melting, as well as reducing hydrogen generation under accident conditions compared to Zr-based alloys. However, a substantial neutron absorption occurs when Ni-based alloys are used as cladding for current uranium-dioxide fuel systems, even when compared to Fe-based alloys.

• Food Science and Preservation
• /
• v.22 no.6
• /
• pp.908-914
• /
• 2015

The objectives of this study were to isolate and characterize low temperature adaptation yeast and to obtain suitable yeasts strains for manufacturing Yakju. In this study, we isolated 482 wild yeasts from fermented foods. Out of these, 5 yeast strains were selected based on increased growth at low temperature ($15^{\circ}C$) and high ${\beta}$-glucosidase activity. To screen the aromatic level of isolates, media containing cerulenin and 5,5,5-trifluor-DL-leucine (TFL) were used. Y297 strain demonstrated tolerance against TFL and produced more than 13% alcohol. Y297 strain was identified a Saccharomyces cerevisiae based on the 26S rDNA gene sequences. Maximum cell growth was observed after 19 hr and 38 hr of incubation at $25^{\circ}C$ and $15^{\circ}C$, respectively. The exponential phase was followed by a lengthy stationary phase, at $15^{\circ}C$, when the cells remained high viable. Y297 strain demonstrated tolerance against alcohol (10%), glucose (60%) and salt(NaCl, 8%). ${\beta}$-glucosidase and esterase activity in Y297 were higher than those of controls at $15^{\circ}C$. Overall, these results indicated that using wild yeast strain, isolated from fermented food, affects the chemical characteristics of the brewed Yakju.

• BMB Reports
• /
• v.42 no.1
• /
• pp.16-21
• /
• 2009

Three novel Class A genes that encode heat shock transcription factor (HSF) were cloned from Oryza Sativa L using a yeast hybrid method. The OsHSF7 gene was found to be rapidly expressed in high levels in response to temperature, which indicates that it may be involved in heat stress reception and response. Over-expression of OsHSF7 in transgenic Arabidopsis could not induced over the expression of most target heat stress-inducible genes of HSFs; however, the transcription of some HSF target genes was more abundant in transgenic plants following two hours of heat stress treatment. In addition, those transgenic plants also had a higher basal thermotolerance, but not acquired thermotolerance. Collectively, the results of this study indicate that OsHSF7 might play an important role in the response to high temperature. Specifically, these findings indicate that OsHSF7 may be useful in the production of transgenic monocots that can over-express protective genes such as HSPs in response to heat stress, which will enable such plants to tolerate high temperatures.

• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.16-25
• /
• 2016

In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconiumalloy fuel claddingmaterials are rapidlyheateddue to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF) design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI) is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in $1,200-1,500^{\circ}C$ steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstratedcorrosionresistance.Asthese composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Moalloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are discussed in this document. In addition to assisting plants in meeting Light Water Reactor (LWR) challenges, accident-tolerant Mo-based cladding technologies are expected to be applicable for use in high-temperature helium and molten salt reactor designs, as well as nonnuclear high temperature applications.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.115-122
• /
• 2019

Foliar fertilization of carbonated water during lettuce hydroponic cultivation was increased photosynthetic rate and stomatal conductance as higher carbon dioxide concentration of carbonated water The higher the carbon dioxide concentration in the carbonated water was better growth of lettuce. However, the carbon dioxide concentration of 500 ppm and 700 ppm in the carbonated water was increased the tip-burn occurrence, and the yield was higher in the 300 ppm. the carbon dioxide concentration of 300 ppm in the carbonated water was lower in the fresh weight but increased yield resulted in the lower of the tip-burn occurrence The high temperature limits for growth were 32℃ in the control, 33℃ in the 300ppm and 34℃ in the 500 ppm according to analyze chlorophyll fluorescent Fo. The high temperature tolerance in lettuce increased approximately 4℃ by foliar fertilization treatments of carbonated water under this experiment conditions. Also the activity of SOD(superoxide dismutase), the antioxidant enzyme, was higher with high carbon dioxide concentration of the carbonated water.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.401-411
• /
• 2023

This study investigates the synthesis, characterization, and application of zinc oxide (ZnO) nanoparticles for corrosion resistance and stress corrosion cracking (SCC) mitigation in high-temperature and high-pressure environments. The ZnO nanoparticles are synthesized using plasma discharge in water, resulting in rod-shaped particles with a hexagonal crystal structure. The ZnO nanoparticles are applied to Alloy 600 tubes in simulated nuclear power plant atmospheres to evaluate their effectiveness. X-ray diffraction and X-ray photoelectron spectroscopy analysis reveals the formation of thermodynamically stable ZnCr₂O₄and ZnFe₂O₄ spinel phases with a depth of approximately 35 nm on the surface after 240 hours of treatment. Stress corrosion cracking (SCC) mitigation experiments reveal that ZnO treatment enhances thermal and mechanical stability. The ZnO-treated specimens exhibit increased maximum temperature tolerance up to 310 ℃ and higher-pressure resistance up to 60 bar compared to non-treated ZnO samples. Measurements of crack length indicate reduced crack propagation in ZnO-treated specimens. The formation of thermodynamically stable Zn spinel structures on the surface of Alloy 600 and the subsequent improvements in surface properties contribute to the enhanced durability and performance of the material in challenging high-temperature and high-pressure environments. These findings have significant implications for the development of corrosion-resistant materials and the mitigation of stress corrosion cracking in various industries.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.1
• /
• pp.7-25
• /
• 1980

Some substances and freezing tolerance in the mulberry (Morus species) branch have been studied on the basis of varietal differences and harvesting times along with harvesting methods in autumn. The results obtained are summarized as follows; 1. The highest freezing tolerance was shown in the varieties of Yongcheon-chou, Jasan, Kang-weon No. 3 and Ichihei, the medium in Roso. Kairyonezumigaeshi, Yanagida and Kokuso No. 28, and the lowest in Ichinose, Mokuso, Kokuso No. 21 and Suweousang No. 3. 2. There was a signifiant negative correlation (r= -0.59＊) between death atop percentage in the field and the temperature required to kill 50% of the mulberry buds (T$_{50}$) with the harvesting times and methods in autumn. Cold hardening occurred in the early through the end of September with the peak at the mid-september. During this period, leaf harvest decreased freezing tolerance with remarkable decrease due to picking all the leaves and leaving several leaves at the base of branch. Greater cold hardening was induced by leaving several leaves after topping. 3. Negative correlations were observed between freezing tolerance and the contents of soluble (r =-0.70＊) and crude (r= -0.70＊) protein. However, positive correlations were shown between freezing tolerance and total carbohydrate contents per crude (r=0.31＊) and per soluble (r=0.71＊) protein . There were also positive correlations between freezing tolerance and total sugar (r=0.67＊) and RNA content (r=0.99＊＊). No relationships of dry matter. fat. total carbohydrate and DNA contents were observed to the freezing tolerance. 4. Such sugars as raffinose. lactose, sucrose, glucose, fructose. arabinose. xylose. ribose (assumed) and rhamnose were detected in winter mulberry branch. Major sugars such as sucrose, glucose, and fructose were supposed to have higher relationship to the freezing tolerance than the other sugars. 5. Late harvesting increased RNA content except in the case of total leaf picking at mid-September. Leaf picking decreased RNA content. Some amount of RNA was, however, maintained by leaving several leaves after topping Leaving upper-middle leaves of a branch showed high RNA content. Leaving young leaves at the top and the overmatured leaves at the base showed low content. A positive correlation (r=0.51＊) was noted between RNA content and freezing tolerance in the different harvesting methods.s.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.6
• /
• pp.771-780
• /
• 2014

A putative lipolytic enzyme gene, named as est9x, was obtained from a marine microbial metagenome of the South China Sea. Sequence analysis showed that Est9X shares lower than 27% sequence identities with the characterized lipolytic enzymes, but possesses a catalytic triad highly conserved in lipolytic enzymes of the ${\alpha}/{\beta}$ hydrolase superfamily. By phylogenetic tree construction, Est9X was grouped into a new lipase/esterase family. To understand Est9X protein in depth, it was recombinantly expressed, purified, and biochemically characterized. Within potential hydrolytic activities, only lipase/esterase activity was detected for Est9X, confirming its identity as a lipolytic enzyme. When using p-nitrophenol esters with varying lengths of fatty acid as substrates, Est9X exhibited the highest activity to the C2 substrate, indicating it is an esterase. The optimal activity of Est9X occurred at a temperature of $65^{\cric}C$, and Est9X was pretty stable below the optimum temperature. Distinguished from other salt-tolerant esterases, Est9X's activity was tolerant to and even promoted by as high as 4 M NaCl. Our results imply that Est9X is a unique esterase and could be a potential candidate for industrial application under extreme conditions.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.153-162
• /
• 2002

Earlier breeding experiments undertaken at Central Sericultural Research and Training Institute, Mysore, India since a decade had resulted in the development of many productive and qualitatively superior bivoltine hybrids. However, the hot climatic conditions of tropics prevailing particularly in summer are not conducive to rear these high yielding bivoltine hybrids. This has necessitated breeding of compatible bivoltine hybrids for year-round rearing. Accordingly, the Japanese hybrid, B2Ol ${\times}$ BCS12 which was found to be tolerant to high temperature was used as breeding resource material. Following hybridization and selection rearing of silkworms was taken up in SERICATRON (Environmental chamber with precise and automatic control facilities for uniform maintenance of temperature and humidity) at high temperature of $36{\times}1^{\circ}C$ and 85${\times}$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65{\times}$5% RH. Directional selection was resorted to the batches reared at 36$\pm$1$^{\circ}C$ till F$_{5}$ keeping pupation rate as important selection criteria. From $F_{2}% onwards the experiment was modified in such a way as to conduct normal rearing every alternate generation to regain the lost vitality due to continuous exposure to high temperature and high humidity stress. At $F_{2}$ , Oval and dumb-bell cocoons were separated out and designated as CSR18 and CSR19, respectively. By utilizing these lines at $F_{12}$, the hybrid CSR18$\times$CSR19 was prepared and studied for the thermotolerance by subjecting to stress condition at high temperature of 36$\pm$1$^{\circ}C$ and 85$\pm$5% RH in fifth instar and the control batches at $25{\times}1^{\circ}C$ and 65${\times}$5% RH. The better performance of CSR18${\times}$CSR19 (survival > 88%) at $36{\times}1^{\circ}C$ clearly indicates the general superiority of CSR18${\times}$CSR19 with regard to high temperature tolerance over the productive hybrids and CSR18$\times$CSR19 can perform well in varied agro-climatic conditions of the tropics with optimum qualitative and quantitative characteristics.s.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.293-299
• /
• 2015

High temperature is one of major environmental stress. Heat tolerance managing is difficult through the phenotypic selection, so marker assistant selection (MAS) using molecular markers like as RAPD, SSR etc. was tried to select useful traits for heat tolerance. Fourteen SSR markers reported by previous research were selected for this research. We tried to evaluate 14 SSR markers for MAS using 31 useful wheat resources including 24 crossing line from Turkey, six Korean wheat cultivars and Chinese spring. The average of the number of alleles and PIC values in this study were 6.14 and 0.64, respectively. Two major clades and four sub clades were grouped by phylogenetic tree using UPGMA. Four Korean wheat cultivars were distinct from other Turkey resources in the phylogenetic dendrogram. From the results, we expected that these markers were able to adapt to screening wheat genotyping for heat tolerance.