• Biomolecules & Therapeutics
• /
• v.23 no.3
• /
• pp.290-295
• /
• 2015

Aging is defined as a collective process that alters organism's functional capacity and appearance over the course of life. Apart from an increase in susceptibility to many diseases, aging affects the cellular system that is responsible for decoding painful stimuli. Yet, aging-associated molecular mechanisms of pain perception remains elusive. Using Drosophila, we showed a decrease in temperature tolerance and a reduction in high temperature thermal avoidance with aging. Locomotor activity assay demonstrated that the age-dependent changes in heat nociception did not stem from the general decline in muscular activity. However, we identified pain-related gene expression alteration with aging. We anticipate that our findings would help opening a new window onto developing the optimal pain treatment for the elderly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.185-189
• /
• 2002

Flexible displays such as plastic based LCDs and organic light-emitting diodes for mobile communication devices have been researched and developed at KETI in KOREA since 1997. The Plastic film substrate has so poor thermal tolerance and non-rigidness that the fabrication of active devices and panel assembly have to perform at low temperature and pressure. In addition, high thermal expansion of the substrate is also a serious problem for reliable metallic film deposition. In this paper, we investigated particularly on the fundamental characteristics of various plastic substrates and then, suggested novel methods that improve the fabrication processes of plastic LCD panel. In order to maintain stable substrate surface and uniform cell gap during panel assembly, we utilized newly-invented iii and vacuum chuck. Electro-optical characteristics of fabricated plastic LCD are better than or equivalent to those of typical glass based LCDs though it is thinner, lighter-weight and more robust.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.99-108
• /
• 2018

An oil-tolerant and salt-resistant aqueous foam system was screened out as a possible lubricant to enable cold heavy oil transportation. The microstructures and viscoelasticity and effects of heavy oil, salt and temperature on the foam stability were investigated and new rheological and drainage models were established. The results indicate the foam with multilayered shells belongs to a special microcellular foam. The viscoelasticity could be neglected due to its low relaxation time. The drainage process can be divided into three stages. The foam with quality of 67.9% maintains great stability at high oil and salt concentrations and appropriate elevated temperature.

• Journal of Plant Biotechnology
• /
• v.32 no.3
• /
• pp.151-159
• /
• 2005

Injury caused by reactive oxygen species (ROS), known as oxidative stress, is one of the major damaging factors in plants exposed to environmental stress. Chloroplasts are specially sensitive to damage by ROS because electrons that escape from the photosynthetic electron transfer system are able to react with relatively high concentration of $O_2$ in chloroplasts. To cope with oxidative stress, plants have evolved an efficient ROS-scavenging enzymes such as superoxide dismutase (SOD) and ascorbate peroxidase (APX), and low molecular weight antioxidants including ascorbate, glutathione and phenolic compounds. To maintain the productivity of plants under the stress condition, it is possible to fortify the antioxidative mechanisms in the chloroplasts by manipulating the antioxidation genes. A powerful gene expression system with an appropriate promoter is key requisite for excellent stress-tolerant plants. We developed a strong oxidative stress-inducible peroxidase (SWPA2) promoter from cultured cells of sweetpotato (Ipomoea batatas) as an industrial platform technology to develop transgenic plants with enhanced tolerance to environmental stress. Recently, in order to develop transgenic sweetpotato (tv. Yulmi) and potato (Solanum tuberosum L. cv. Atlantic and Superior) plants with enhanced tolerance to multiple stress, the genes of both CuZnSOD and APX were expressed in chloroplasts under the control of an SWPA2 promoter (referred to SSA plants). As expected, SSA sweetpotato and potato plants showed enhanced tolerance to methyl viologen-mediated oxidative stress. In addition, SSA plants showed enhanced tolerance to multiple stresses such as temperature stress, drought and sulphur dioxide. Our results strongly suggested that the rational manipulation of antioxidative mechanism in chloroplasts will be applicable to the development of all plant species with enhanced tolerance to multiple environmental stresses to contribute in solving the global food and environmental problems in the 21st century.

• Journal of Plant Biotechnology
• /
• v.44 no.3
• /
• pp.296-302
• /
• 2017

Rice (Oryza sativa) cultivars show an impairment of growth and development in response to abiotic stresses such as drought, salinity, heat and cold at the early seedling stage. The tolerance to heat stress in plants has been genetically modulated by the overexpression of heat shock transcription factor genes or proteins. In addition to a high temperature-tolerance that has also been altered by elevating levels of osmolytes, increasing levels of cell detoxification enzymes and through altering membrane fluidity. To examine the heat tolerance in transgenic rice plants, three OsOPT10 overexpressing lines were characterized through a physiological analysis, which examined factors such as the electrolyte leakage (EL), soluble sugar and proline contents. We further functionally characterized the OsOPT10 gene and found that heat induced the expression of OsOPT10 and P5CS gene related proline biosynthesis. It has been suggested that the expression of OsOPT10 led to elevated heat tolerance in transgenic lines.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.179-179
• /
• 2018

Potato (Solanum tubersosum L.) is susceptible to various environmental stresses such as salt, high temperature, and drought. Especially, potato tuber growth is greatly affected by drought that causes not only yield reduction but also loss of tuber quality. Since unpredictable global weather changes cause more severe and frequent water limiting conditions, improvement of potato drought tolerance can minimize such adverse effects under drought and can impact on sustainable potato production. Genetic engineering can be utilized to improve potato drought tolerance, but such approaches using endogenous potato genes have rarely been applied. We were obtained AtbZIP28 gene transgenic potato plants. It is identified transcript levels at various stress conditions, polyethylene glycol (PEG), NaCl, (ABA). Also, For identification to regulate ER stress response genes in AtbZIP28 gene transgenic potato plant, we screened seven potato genes from RNA-seq analysis under TM treatment. Five and two genes were up- and down-regulated by TM, respectively. Their expression patterns were re-examined at stress agents known to elicit TM, DTT, DMSO and salt stress.

• Journal of Sensor Science and Technology
• /
• v.11 no.6
• /
• pp.358-364
• /
• 2002

In this paper, we used U.V.(wavelength, 355nm) laser for adjusting Pt thin films temperature sensor to $100{\Omega}$ at $0^{\circ}C$. Internationally, A-class tolerance of temperature sensor is $0.06{\Omega}$ at $0^{\circ}C$. This is under value of $0.15^{\circ}C$, actually, so high-fine trimming technology is essential to this process. The width of trimmed lines was about $10{\mu}m$ and the best trimming of Pt thin films of $1{\sim}1.5{\mu}m$ was carried out with power : 35mW, rep. rate frequency : 200Hz and bite size : $1.5{\mu}m$. And using photolithography process, 96 resistors were fabricated in $2"{\times}2"$ substrate as the proportion of $79{\sim}90{\Omega}$ and $91{\sim}102{\Omega}$ is 42.7% and 57.3%, respectively. As result of trimming resistors to the target value of $109.73{\Omega}$ at $25^{\circ}C$, 82.3% of resistors had the tolerance within ${\pm}0.30{\Omega}$ and the others(17.7%) were within ${\pm}0.06{\Omega}$ of A-class tolerance.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2005

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. $25{\sim}35^{\circ}C$ and pH ca. $5{\sim}7$, respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

• Journal of Sensor Science and Technology
• /
• v.12 no.5
• /
• pp.199-204
• /
• 2003

This paper describes on the fabrication and characteristics of a ceramic thin-film pressure sensor based on Ta-N strain-gauges for harsh environment applications. The Ta-N thin-film strain-gauges are sputter-deposited onto a micromachined Si diaphragms with buried cavity for overpressure protectors. The proposed device takes advantages of the good mechanical properties of single-crystalline Si as diaphragms fabricated by SDB and electrochemical etch-stop technology, and in order to extend the operating temperature range, it incorporates relatively the high resistance, stability and gauge factor of Ta-N thin-films. The fabricated pressure sensor presents a low temperature coefficient of resistance, high-sensitivity, low non-linearity and excellent temperature stability. The sensitivity is $1.097-1.21\;mV/V{\codt}kgf/cm^2$ in the temperature range of $25-200^{\circ}C$ and the maximum non-linearity is 0.43%FS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.107-112
• /
• 2013

The aim of this study was to test hypothesis that low sink size could mitigate deterioration of grain filling characteristics under high grain filling temperature. To achieve this aim, we selected Donganbyeo as a tolerant and Ilpumbyeo as susceptible variety to high temperature during grain filling period through screening 6 rice varieties. Then their spikelets number and the ratio of superior and inferior spikelet were compared. Grain weight and head rice ratio of Ilpumbyeo decreased significantly in high temperature. Ilpumbyeo had more spikelets than Donganbyeo. However, there was no significant difference between two varieties in the ratio of superior and inferior spikelets. So we tried to investigate the varietal difference of grain filling characteristics with removing inferior spikelets. Removing inferior spikelet in both of varieties could recover grain weight but not improve head rice ratio under high temperature. These results showed that sink/source ratio affected grain weight but didn't affect head rice ratio. Therefore, new approach was required to improve head rice ratio beyond sink/source ratio under high temperature.