• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.65-89
• /
• 2003

Next Highly sophisticated communication generation of the Advanced Electronics and Imaging processing society will require a vast information volume and super high speed signal transport and information instruction. This means that super high technology should be created for satisfying the demand. It's also required the high reliability of the communication system itself, It will be supported the new advanced packaging technology of the 3 Dimensional structured system and system integration technology. Here is introduced the new 3 Dimensional technology for IC nnd LSI packaging and Opt-electronics Packaging of ASET activity in Japan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.26-34
• /
• 2014

This study focuses on development of a risk level evaluation model for the intersection dilemma zone based on vehicle speed distribution approaching the intersection. The study results show that dilemma zone exists for all approaches selected for the study because the values of amber time have not been properly set, and that re-optimized values significantly reduce the dilemma zone risk level. It is also found that when normal distribution is assumed for vehicle approach speed the risk values similar to those for actual speed distributions can be obtained. When the risk level is found to be high, the amber time must be adjusted to reduce the length of the dilemma zone, or speed calming measures must be introduced so that vehicle speed be maintained under the speed value used when determining the amber time.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2014

In this paper, travel speed patterns were deducted based on historical DSRC travel speed data using Decision Tree technique to improve availability of the massive amount of historical data. These patterns were designed to reflect spatio-temporal vicissitudes in reality by generating pattern units classified by months, time of day, and highway sections. The study area was from Seoul TG to Ansung IC sections on Gyung-bu highway where high peak time of day frequently occurs in South Korea. Decision Tree technique was applied to categorize travel speed according to day of week. As a result, five different pattern groups were generated: (Mon)(Tue Wed Thu)(Fri)(Sat)(Sun). Statistical verification was conducted to prove the validity of patterns on nine different highway sections, and the accuracy of fitting was found to be 93%. To reduce travel pattern errors against individual travel speed data, inclusion of four additional variables were also tested. Among those variables, 'traffic condition on previous month' variable improved the pattern grouping accuracy by reducing 50% of speed variance in the decision tree model developed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.75-82
• /
• 2021

The number of traffic accidents is about 230,000, and due to non-recurring congestion and high driving speed, the number of deaths per traffic accident on freeways is more than twice compared to other roads. Currently, traffic information is provided based on nodes and links using the centerline of the road, but it does not provide detailed speed information. Recently, installing sensors for vehicles to monitor obstacles and measure location is becoming common not only for autonomous vehicles but also for ordinary vehicles as well. The analysis using large-capacity location-based data from such sensors enables real time service according to processing speed. This study presents an mapping method for individual vehicle data analysis based on space. The processing speed of large-capacity data was increased by using method which applied a quaternary notation basis partition method that splits into two directions of longitude and latitude respectively. As the space partition was processed, the average speed was similar, but the speed standard deviation gradually decreased, and decrease range became smaller after 9th partition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.81-94
• /
• 2007

In order to solve the traffic problem which comes to be serious at day, the impotance of Intelligent Transport Systems(ITS) that accomplish information gathering, information processing, information offering with up-to-date scientific techniques is coming to be high. But many local self-government group want to solve the traffic problems with introduction of ITS, however, it is a actual condition where the systematic effective analysis is insufficient. This study establishes the methodology of effective analysis as introduction of ITS, which refers to the inside and outside of the country instance. And then, this research accomplishes direct and indirect effective analysis with the case study. As a result of SUWON ITS introduction effect analysis, the travel speed of TRC mode is increased 31%, and the delay of TRC mode is diminished 43.9% than before introducing case. Most of the citizen felt the improvement effect of ITS system operation, and the majority wanted the expansion of the ITS system in survey. The analysis of economic result that B/C ratio is 5.12. So, The the effect and economic propriety of the ITS enterprise appeared with the fact that it is sufficient.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.511-514
• /
• 2007

Gas hydrate has a unique property that can store a large volume of gas in water as a solid form. Even though investigations for natural gas storage technology have been carried out for several decades, there are still a lot of unsolved problems due to complex formation process, low formation speed, high energy consumption and so on. So, lots of experiments were conducted to overcome these weaknesses and to develop artificial NGH formation technology applicable to industrial-scale storage and commercial transport. In this study, some series of experiments were performed to analyze both stirred and unstirred system especially about the influences of several gas hydrate formation factors such as agitation speed, system temperature, SDS concentration, etc. As a result, optimum range of SDS concentration and temperature that could enhance the storage capacity and shorten the formation time were found. And it is obviously presented that SDS such a kind of surfactant promotes gas hydrate formation dramatically and the quantity of stored gas are proportional to agitation speed in stirred system.

• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.461-469
• /
• 2015

The next generation high-speed train, HEMU-430X, was developed and is now being tested. However, the existing mode choice models based on the guidelines for feasibility studies do not consider a high-speed train with a higher speed than KTX. This limitation might result in inaccurate demand forecasting. In this research, a stated preference survey was conducted in order to supplement the problem by considering the characteristics of HEMU-430X. Based on the survey results, this research developed two mode choice models, including a multinomial logit model and a nested logit model. For this purpose, the utility functions of travel time and travel costs were estimated using a Limdep 8.0 NLOGIT 3.0 package. After comparing the two models, it was concluded that the nested logit model is appropriate. The paper suggested a plan to implement the nested logit model and presented a policy implication.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.784-791
• /
• 2000

To improve the uniformity of slurry spreading and to reduce the odor problem, a hose slurry spreader was developed, which spread the slurry near to the surface of the soil. First, the uniformity of slurry spreading was investigated. The best result of 8.1 ％ CV was obtained at the rotor speed of 250 rpm than any other speeds for the swine slurry, which contains 13.6% of dry matter. In case of dairy cattle slurry, which contains 8.2% of dry matter, the uniformity has the best result of CV 7.2% by high rotor speed of 330 rpm. A high speed of rotor has built a sufficient pressure in the distributor and discharged a uniform quantity of slurry through the hoses. Therefore, in practical use one should work with rotor speed over 300 rpm to maximize the uniformity of slurry spreading. Second, odor test was done with the swine slurry. While the conventional spreader shows ∑ value 440, the hose slurry spreader and its combination of disk harrow show ∑ value 258 and 184 respectively. With the air dilution sensual test and a 3-point odor bag, the conventional spreader shows 66.9 or 35.4 point and by the hose slurry spreader is 9.7 or 11.1 point. So, the developed spreader was found to have a greater effect on the reduction of odor problem. Finally, it is recommended to spread certain amount of the slurry for paddy field equivalent to the chemical fertilizer based on the N-content. It means 22 tons of swine slurry per ha. Since most of the livestock farms possess less arable land, a system of linking farms is necessary to utilize the slurry crossover the farms. The cost of slurry utilization including filling, transport spreading and brokerage is 3200-6800 Won/㎥ in accordance with the transport distance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.450-465
• /
• 2021

In this study, an attempt has been made to investigate the water-entry characteristics of the high-speed parallel projectile numerically. The shear stress transport k-𝜔 turbulence model and the Zwart-Gerber-Belamri cavitation model based on the Reynolds-Averaged Navier-Stokes method were used. The grid independent inspection and grid convergence index is carried out and verified. The influences of the parallel water-entry on flow filed characteristics, trajectory stability and drag reduction performance for different values of initial water-entry speed (𝜈₀ = 280 m/s, 340 m/s, 400 m/s) and clearance between the parallel projectiles (L_p = 0.5D, 1.0D, 2.0D, 3.0D) are presented and analyzed in detail. Under the condition of the parallel water-entry, it can be found that due to the intense interference between the parallel projectiles, the distribution of cavity is non-uniform and part of the projectile is exposed to water, resulting in the destruction of the cavity structure and the decline of trajectory stability. In addition, the parallel projectile suffers more severe lateral force that separates the two projectiles. The drag reduction performance is impacted and the velocity attenuation is accelerated as the clearance between the parallel projectiles reduces.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.4
• /
• pp.67-80
• /
• 2020

High-speed weigh in motion (HS-WIM) is a real-time unmanned system for measuring the weight of a freight-carrying vehicle while it is in motion without controlling vehicle traffic flow or deceleration. In Korea, HS-WIM systems are installed on the national highways and general national ways for pre-selection by law enforcement. In this study, to improve the measurement accuracy of HS-WIM, we devise improvements to the existing integral and peak weight conversion algorithms, and we provide a new fusion algorithm that can be applied to the mat-type HS-WIM. As a result of analyzing vehicle driving tests at a real site, we confirmed the highest level of weight-measuring accuracy.