• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.491-494
• /
• 2009

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$ which is a trade mark of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$ has been designed in consideration of high RAMS (Reliability, Availability, Maintainability and Serviceability) and cost effectiveness for the TC Ia condition in GL guideline. An integrated drive train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in part load operation, and grid friendliness use of 50 Hz and 60 Hz grid. A pitch regulated variable speed power control with individual pitch system has been introduced to regulate rotor torque while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. An individual pitch control system has been introduced to reduce fatigue loads of blade and system. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements. And internal maintenance crane in nacelle has been developed. As a result, the maintenance cost was dramatically reduced and maintenance convenience also enhanced in offshore condition.

• 한국정보통신학회논문지
• /
• 제14권9호
• /
• pp.2164-2170
• /
• 2010

Digital radio frequency memory (이하 DRFM)은 입력되는 RF신호를 저장 후 필요한 시점에 입력된 RF신호로 복원하여 출력하는 기능을 가진 장치로써 Jammer, EW시뮬레이터, Target Echo Generator[1] 등 사용되는 분야가 광범위하다. 본 논문에서는 고주파 입/출력모듈, 국부 발진모듈로 구성된 고주파부와 디지털 처리부로 이루어진 DRFM의 하드웨어적 구현 방안을 제안한다. 그리고 펄스형태의 RF신호를 양자화하는 ADC(A/D conversion), 이 데이터를 저장하고 재생신호를 생산하는 FPGA와 RF 신호를 생산하는 DAC(D/A conversion)로 구성되는 디지털 처리부에서 복제된 신호 생성방안을 제안한다. 이렇게 제안된 방안을 적용하여 제작한 후 모의 신호를 입력하여 얻은 시험결과를 통하여 이 제안방안의 타당성을 확인한다.

• 방송공학회논문지
• /
• 제16권3호
• /
• pp.403-415
• /
• 2011

본 논문에서는 고속으로 디지털 홀로그램을 생성할 수 있는 하드웨어구조를 제안하였다. 수정된 컴퓨터 생성 홀로그램(computer-generated hologram, CGH) 알고리즘을 이용하고, 기존의 한 화소에 대한 홀로그램 전체 화소를 연산하는 방법이 아니라 객체 전체 화소에서 홀로그램의 한 화소씩 연산하는 방법을 선택하여 홀로그램 한 화소씩 계산하고 바로 출력 하여 메모리 병목 현상을 제거하기 위한 파이프라인 기반의 하드웨어 구조를 제안하였다. CGH 알고리즘을 바탕으로 입력부, 연산부, 및 정규화부로 구성된 디지털 홀로그램 생성기의 구조를 제안하였고, 이를 효율적인 하드웨어로 구현하였다. 객체의 화소만 저장하여 반복 사용하기 때문에 메모리의 사용량을 줄일 수 있었다. 제안한 하드웨어는 세로 방향으로 확장을 하여 동작을 병렬화시킬 수 있다. 제안한 하드웨어는 1K의 광원에 대해 HD급 홀로그램을 초당 약 87장을 생성할 수 있었다.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.1117-1122
• /
• 2005

본 논문은 광섬유 루프 결합기를 이용한 고반복률의 펄스 발생에 대해 연구하였다. 최근 OTDM에서, 고 반복률 광 펄스의 개발이 필요하다. 이것은 광섬유나 집적화된 도파관 지연 선로 회로들 일반적인 접근법과 차이가 있다. 고 반복율 광펄스 다중 현상은 광펄스들의 분리 폭이 사용된 결합기의 전달대역폭보다 더 클 때 발생한다. 분석으로, 출력 반복율은 서로 다른 등가 전송 대역폭인 광섬유 결합기를 이용하여 조절될 수 있다 분리간격은 직렬의 광루프 미러 결합기 수를 조절함으로서 얻을 수 있다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.786-797
• /
• 2016

This paper describes the design and development of a novel semiconductor-based solid-state switch for damped oscillating voltage test system. The proposed switch is configured as two identical series-connected switch stacks, each of which comprising 10 series-connected IGBT function units. Each unit consists of one IGBT, a gate driver, and an auxiliary voltage sharing circuit. A single switch stack can block 20 kV-rated high voltage, and two stacks in series are proven applicable to 30 kV-rated high voltage. The turn-on speed of the switch is approximately 250 ns. A flyback topology-based power supply system with a front-end power factor correction is built for the drive circuit by loosely inductively coupling each unit with a ferrite core to the primary side of a power generator to obtain the advantages of galvanic isolation and compact size. After the simulation, measurement, and estimation of the parasitic effect on the gate driver, a prototype is assembled and tested under different operating regimes. Experimental results are presented to demonstrate the performance of the developed prototype.

• 항공우주시스템공학회지
• /
• 제8권3호
• /
• pp.1-5
• /
• 2014

An inner flow of a porous cylinder with partial slots was visualized to study fluidic phenomena in a solid rocket motor. A high-pressure chamber and an air supply system for high flow rate were used. In order to visualize the inner flow, the smoke generator with a cam-driven pump and heaters and high speed camera were adopted. The results of the cylinder type and the partial slot type were compared. As a result, the injected smoke flow in the partial slot type had circumferential fluctuations unlike the cylinder type. It was found that the circumferential flow induced from the partial slots could be the cause of combustion instability and roll torque.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.1-5
• /
• 2006

In this paper, the frequency estimator and DFT filter gain compensation for UFR(Under Frequency protection Relay) is introduced. Due to the sudden appearance of generator loads or faults in power system, the frequency is supposed to deviate from its nominal value. Because a frequency calculation is based on phase information, it needs sufficient sampling data to figure out a precious frequency. Therefore the frequency measurement for UFR needs excellent qualities such as high speed and precision with low sampling frequency Authors propose the frequency estimator which compares the vector differences and the DFT filter gain compensation which identifies DFT filter error and correct it. Using the frequency estimator and compensation, UFR which has the 0.01[ms] calculation delay and 0.003[Hz] measurement error is implemented with digital processor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.591-597
• /
• 1997

Instantaneous velocity distribution within coaxial circular pipe for measurement velocity of high speed is acquired simultaneously by applying the 2-dimensional PTV system consisting of a pulse generator(AOM:Acousto-Optical Modulator), a continuous-output laser and a PC image grabber together with experimental apparatus. The basic mechanism of AOM and vector identification method and performance-related image processing techniques are discussed. Representative measuring regions $90{\times}90$mm are selected and instantaneous vectors are represented and fully developed turbulent flow of maximum velocity up to about 1.0 m/sec is obtained.

• 센서학회지
• /
• 제21권4호
• /
• pp.303-310
• /
• 2012

We carried out the power performance evaluation for 1.5 MW${\times}$2 by using anemometer installed on WTGS(Wind Turbine Generator System) in the wind farm at Shi-hwa bang-a-mu-ri. In this paper, we compared and analyzed the performance of guaranteed output and measured output of WTGS which includes output curve, output coefficient, AEP(Annual Energy Product) and availability, etc.. The power performance of WTGS was optimized in the low wind speed sections(3 m/s ~ 10 m/s) and the measured output was more produced by AEP 109 % and availability 112 % than the guaranteed output. In addition, we could also cut the high cost of testing WTGS performance by using anemometer as a substitute for weather mast.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1591-1596
• /
• 2005

In this paper, we designed the aspheric lens by mathematical methods which are solved by refractive index. Based on these mathematical method, we manufactured the aspheric lens. Because of the usefulness of manufacturing, we used the acryl as the material. And we used a high speed machine to manufacture the aspheric lens. Also it sits in judgment the aberration of spherical distribution by using the grid fringe. Asource of laser produced by laser sheet generator passed the optical system of the aspheric lens. Though a character is to verify that the accuracy of the aspheric lens by experiment of the straight character.