• 한국건축시공학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2015

본 연구의 목적은 ALC 블록대체를 위한 고성능 기포콘크리트 배합설계를 개발하는 것이다. 대기양생 하에서 기포콘크리트의 고강도 발현(특히 초기재령에서)을 위하여 결합재 및 혼화제를 사전연구에서 다음과 같이 설계하였다. 규산3칼슘이 60% 이상인 보통포틀랜드시멘트에 무수석고 3%를 첨가하였으며, 폴리카르본산계 감수제에서 폴리알킬에테르 성분을 28%로 조절하였다. 이들 재료를 사용하여 물-결합재비와 단위결합재양을 변수로 기포콘크리트 11배합을 실험하였다. 배합된 기포콘크리트의 품질 및 실용성은 KS 규격의 ALC 블록의 요구조건 및 기존의 일반 기포콘크리트와 비교하였다. 실험결과 본 연구의 고성능 기포콘크리트는 ALC 블록의 요구조건을 만족하면서 높은 실용가능성을 보였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.34-35
• /
• 2019

In recent years, the construction industry has also applied the dry method that can be assembled in the field by industrialization and factory production, which is free from climatic effects and can reduce the cost due to mass production and simplify the work in the field. Among the building materials used in this dry method, ALC products are made by mixing calcium oxide, gypsum, cement, and water in silica and putting them in an autoclave to create voids in the interior through steam curing at high temperature and pressure. But it requires curing cycle conditions of warming, isothermal, and temperature curing. It depends on the performance of the product depending on the curing conditions, the economical efficiency due to high oil prices, the emission of greenhouse gases by the use of fossil fuels. Experiments were conducted to select an appropriate animal protein foam for lightweight foamed concrete block which was cured by applying a prefilling method to replace existing ALC products. As a result of investigating the characteristics of lightweight foamed concrete by type of animal protein foam, it is considered that FP3 is most suitable for manufacturing lightweight foamed concrete block.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.19-22
• /
• 2007

This study discussed the prevention of the spalling and improvement of the fire resistance performance how to fill up lightweight foamed concrete on high strength RC column attached with the stone panel. The destructive spalling extremely occur caused by sudden high temperature and increased vapor pressure corresponding to falling the ston panel at all RC column, and the steel bar is exposed. The stone panel fall off about 30 minutes and spalling occur about 70 minutes on Plan RC column, fire endurance paint, and fire endurance mortar, so it can be confirmed that fire endurance paint and mortar, which is used as fire endurance material, are not effective. In the other side, it can be protected from fire about $120{\sim}140$ minutes when the lightweight foamed concrete is used as fire endurance material. For the weight loss after the fire test, plain is 33, fire endurance paint is 37%, and fire endurance mortar s 40.7%. And W/B 60%-3 is 53.4%, 60%-1.5 is 40.1%,65%-3 is 39.4%, and 65%-1.5% is 47.1. Overall, the weight loss of the plain is lower than that of the lightweight foamed concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.53-56
• /
• 2007

Recently, waste concrete emission has been increased by acceleration of urban development and the rapid growth of redevelopment projects, so recycling of waste concrete is actively progressed, But the usage is limited to a lower value added such as the roadbed material etc. To produce the high quality recycled aggregate, breaking and washing process is added to the existing process and inevitably increases the occurrence of particle, because old mortal is included in the recycled aggregate. Therefore, this study purpose is analysis the properties of lightweight foamed concrete made by waste concrete sludge which is the by-product from produce the recycled aggregate. In result, possibility of manufacture of lightweight foamed concrete which gives equal performance compared with ALC was detect(scope of density : $0.5{\sim}0.6$, scope of compressive strength : $3.5{\sim}4.0MPa$). And scope of porosity is as follow ; total porosity : $27{\sim}30%$, open porosity : $1{\sim}5%$

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.35-38
• /
• 2006

This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.321-324
• /
• 2008

Water retaining pavement is a pavement to lower the surface temperature by using evaporation of the water that the pavement contains when the pavement is heated by the sun in the daytime, so, to improve performance, the performance can absorb water. Most of the high-performance material that absorbs water swell $2\sim3$ times as much volume when it contact with water. Water retaining material exists independently of the material in the cement. so it doesn't have the space to expand. Therefore, the performance of absorbing water is decreased. Therefore, this study was to develop a foamed concrete and evaluation of performance characteristics using high absorptiveness resin. The result has been evaluated as excellent compared to other materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.113-116
• /
• 2008

In these days, properties of concrete has been demanded to be high performance because concrete structure was bigger and higher. So studies on high strength concrete and lightweight concrete has been frequently done. But lightweight concrete has been used to limited non-structural elements in th country. Lightweight aggregate mixed with lightweight concrete was only coarse aggregate in case of the structural lightweight concrete. In the country studies on the lightweight concrete was poor and unvaried. Also it is difficult to be practical use of lightweight concrete was that it has been expensive. It was study on the using fine lightweight aggregate with lightweight concrete to crushed by-products and wastes to get to make foamed glass with recycled glass. So it was tested by fine aggregate standard and mixed with.

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2012

최근 정부는 '저탄소 녹색성장 기본법'을 시행하여 국가 총체적 차원에서 에너지 절감, 온실가스 저감을 위한 노력을 기울이고 있다. 건물부문에서는 건물외피와 단열재의 열적 특성을 검토하여 건물 자체의 단열성능을 높임으로써 에너지를 절감할 수 있다. 이 연구는 건물부문의 에너지 절감을 목적으로 건물에 적용 가능한 경량기포 콘크리트 단열패널을 개발하기 위한 연구로서, 기포제 종류(AES, AOS, VS, FP)와 기포제 희석농도(1%, 3%, 5%), 기포율(30%, 50%, 70%)에 따른 기포 콘크리트의 물리·역학적 특성 및 열적 특성을 검토하여 에너지 절감을 위한 단열재로서의 최적조건을 찾고자 하였다. 실험 결과, 발포율에 영향을 미치는 기포제가 포함된 수용액의 표면장력은 AOS를 사용한 경우가 다른 기포제를 사용한 경우보다 낮게 나타났다. FP는 표면장력의 저하량이 크지 않고 발포율이 낮기 때문에 저농도로 희석한 경우 다량의 수분을 함유하고 있는 안정적이지 못한 기포가 생성되어 3% 이상 사용하여야만 비교적 안정적인 기포를 만드는 것이 가능하였다. 또한, 압축강도와 열전도율은 저밀도 영역에서는 기포제 종류에 따른 차이는 발생하지 않았으나, 상대적으로 고밀도영역에서 압축강도는 AOS와 FP, 열전도율은 VS와 FP가 더 효과적인 것으로 나타났다. 또한, 기포농도와 기포율이 증가할수록 공극 크기는 커지며 열린공극을 형성하는 것으로 나타났으며 모든 기포제에 대한 열전도율은 KS기준을 만족하여 우수한 단열재로서의 가능성을 보였다. 종합적인 분석 결과, FP를 농도 3%로 사용하여 제조한 시험체가 건물에 적용시 기포 콘크리트 단열패널로서 가장 우수한 성능을 발현할 것으로 판단된다.