• 한국의류학회지
• /
• 제26권6호
• /
• pp.801-810
• /
• 2002

The purpose of this study is to suggest standard bodytype which offers criterion for the sizes and shapes to interpret various bodytypes, to estimate fitting, and to construct ready-made clothing. There were two ways of analyzing bodytypes of subjects from the viewpoint of statistic and beauty. We had carried on the analysis from the viewpoint of statistic in the Part(1) and we carried on the analysis from the viewpoint of beauty in this Part(2). Taken as a sample, the subjects were ninety-seven females who were between the aloes of 18 and 24 rears o1d. They were measured on November 1999. The data of seven hundred and four females,18∼24 year-old, from the National Somatometry Survey of 1997 were used for analysis, too. The first analysis from the viewpoint of beauty was executed to the front and side photographs of the subjects to analyze the general traits of the beautiful bodytype. The second analysis from the viewpoint of beauty was executed to subjects who were in both High-frequency proportion range and Beautiful bodytype group. As the result, four groups in Beautiful and High-frequency proportion range were selected. The standard proportion was analyzed with the size and shape of four groups. Based on the standard proportion, the size, shape and silhouette of the standard bodytype were analyzed. To verify the size, shape and silhouette of the standard bodytype, the location of the standard bodytype in the 1997 National Somatometry Survey group was analyzed. As the result, the standard bodytype was verified as proper criterion to interpret various bodytypes, to estimate fitting, and to construct ready-made clothing.

• 한국의류학회지
• /
• 제26권5호
• /
• pp.630-641
• /
• 2002

본 연구에서는 기성복 제작과 체형해석에 필요한 기준을 마련하기 위해, 표준체형의 개념을 다빈도 구간에 속하면서 아름다운 크기와 형태, 프로포션을 갖는 체형으로 정의하였다. 이에 따라 다수의 피험자가 속해 있는 H.P.구간을 밝히고, 각 체형 분류 방법에 의해 제시된 다빈도 유형 및 바른체형 유형, H.P. 구간 피험자의 체형이 각각 전체 피험자 집단의 체형을 대표할 수 있는지에 대해 검토하였다. 그 결과 특정 체형 분류 방법에 의한 다빈도 유형이나 바른체형 유형을 기준으로 표준체형에 접근하기보다는, H.P. 구간 피험자 집단의 체형특성을 기준으로 표준체형에 접근하는 것이 타당하다고 판단되었다. 또한 본 연구에서는 표준체형을 도출해 내기 위해 선행 체형 분석 방법에 의해 분류된 다빈도 유형 및 바른체형 유형과 다빈도 구간을 비교, 분석함으로써 다빈도 형태에 대해 먼저 접근하는 방법을 사용하였다. 표준 형태를 파악한 후 표준 치수를 찾아내는 방법을 통해 표준체형의 형태적 특징에 대한 많은 정보를 얻을 수 있다고 판단된다. 제2보에서는 첫째, 사진평가에 의한 미적 분석 방법을 제안하고, 둘째, 체형에 대한 미적분석 결과를 본보에서 제시한 통계적 분석 결과와 합하여 표준프로포션과 표준체형을 제안하고자 한다.

• 한국작물학회지
• /
• 제55권1호
• /
• pp.83-90
• /
• 2010

수년 동안 국내 전역에서 수집된 수수 179 유전자원을 공시하여 작물학적 특성조사를 통한 품종육성의 기초자료를 제공코자 수행하였던 바 그 결과를 요약하면 다음과 같다. 1. 수수의 수형은 산수형, 소경수수형, 반소경수수형, 극밀수형, 및 밀수형의 5가지 수형이 존재하였으며, 수형별 빈도를 보면 소경수수형이 38.0%(68자원)로 가장 많았으며, 극밀수형 및 밀수형이 각각 16.2%, 7.8%로 가장 적었다. 2. 수수 이삭의 까락 유무는 28.5%(51자원)가 까락을 갖고 있었으며, 나머지 71.5%(128자원)는 까락이 없는 것으로 분류되었다. 3. 종실형태는 43.0%(77자원)가 원형으로 가장 많이 차지하였으며, 편원형이 7.3%(13자원)로 가장 적었다. 종피색은 황갈색이 84.4%(151자원)로 가장 많았으며, 갈색 및 흰색이 똑같이 1.1%로 가장 적었다. 4. 수수 179자원의 출수소요일은 67~88일의 범위를 나타내어 변이폭이 컷으며, 평균은 77.4일이었다. 출수소요일의 분포는 179자원 중 76~80일이 37.4%(67자원)로 가장 많았으며, 86일 이상도 5.6%이었으며, 70일 이전에 출수한 자원도 10.0%를 나타내었다. 5. 간장은 92~360 cm의 범위를 보였으며, 평균은 253.8 cm로 변이의 폭이 컷다. 간장의 분포는 291~310 cm가 20.6% (37자원)로 가장 많았다. 6. 수장은 15~49 cm의 범위를 보였고, 평균 28.8 cm이었다. 수장의 분포는 31~35 cm가 26.3%(47자원)로 가장 많았으며, 15 cm 이하가 0.6%로 가장 적었다. 7. 생육일수는 110~146일의 범위를 나타내어 변이 폭이 상당히 큼을 알 수 있었고, 평균은 125.5일이었다. 생육기간의 빈도는 111~115일이 39.7%(71자원)로 가장 많았으며, 110일 이하와 141일 이상에 속하는 자원도 각각 2, 23자원이나 되었다. 8. 1수립수의 범위는 163~4,532개로 변이 폭이 상당히 컷으며, 평균은 2,068.6개 이었다. 1수립수 분포는 1,601~2,000개가 25.7%(46자원)로 가장 많았다. 9. 공시된 179 유전자원의 1000립중은 범위가 10.6~38.1 g으로 변이폭이 컷으며, 평균은 25.6 g이었다. 1000립중의 분포는 26.0~30.0 g가 전체의 44.1%(79자원)로 가장 많았다

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.473-479
• /
• 2008

With the advent of mobile phone, digital multimedia broadcasting(DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion(THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.236-241
• /
• 2008

With the advent of mobile phone, Digital multimedia broadcasting (DMB) service is to be realized for multimedia data communication. For an acoustic part, a smaller and lighter microspeaker is also soon to be realized as an MP3 song player and a speakerphone. Sound quality in the microspeaker is becoming more important in mobile phones. It is evaluated by total harmonic distortion (THD). THD is the proportion of higher order frequencies output response to sinusoidal input signal. It is affected by uneven magnetic distribution and nonlinear response of diaphragm. In this paper, harmonic distortion is analyzed by considering magnetic and mechanical coupling effects. Simulated results of THD are compared with experimental data. Results show that THD in lower frequency range is higher due to high displace on voice coil and high mechanical response of high order frequency.

• 한국산업보건학회지
• /
• 제1권2호
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.391-396
• /
• 2004

For technical and economic reasons, the drum drive system employed in the domestic waking machines have traditionally been based on a combination of a high speed induction motor and a pulley and belt. This paper deals with washing machine drive based on an inverter fed induction motor. In this case, voltage is applied in proportion to frequency to achieve rated torque though the range. But scalar control such as V/f methode is somewhat simple to implement, but the inherent coupling effect given sluggish response. Therefore, this paper describes study on induction motor vector control for drum type washing machine.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.46-52
• /
• 2003

In this paper, we fabricated PRT(platinum resistance thermometers) with the trimming technology using high fine laser system. U. V.(wavelength： 355nm) laser was mainly used for adjusting Pt thin films resistors to 100Ω at 0$^{\circ}C$. Internationally, the accepted A-class tolerance of temperature sensor is ${\pm}$0.06Ω at 0$^{\circ}C$. according to DIN EN 60751. The width of trimmed lines was about 10$\mu\textrm{m}$ and the best trimming conditions of Pt thin films were power : 37mW, frequency : 200Hz and bite size：1.5$\mu\textrm{m}$. And 96 resistors, fabricated by photolithography and etching process, have 79∼90Ω and 91∼102Ω as the proportion of 45.7% and 57.3%, respectively. As result of sitting Pt thin films resistors to the target value(109.73Ω at 25$^{\circ}C$), 82.3% of all resistors had the tolerance within ${\pm}$0.03Ω and the others(17.7％) were within ${\pm}$0.06Ω of A-class tolerance. The PRTs which wore fabricated in this research had excellent characteristics as follows； high accuracy, international standard TCR(temperature coefficient of resistance) value, long-term stability, wide temperature range, good linearity and repeatability, rapid response time, etc.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.224-231
• /
• 2016

When aiming to reduce the low frequency noise of a subway guest room through sound absorbing treatment methods inside the wall of a tunnel the resonator is often more effective than a porous sound absorbing material. Therefore, the perforated panel type resonator embedded with a perforated panel is proposed. The perforated panel is installed in the neck, which is then extended into the resonator cavity so that it can ensure useful volume. The absorption performance of the perforated panel type of resonator is obtained by acoustic analysis and experiment. The analytical results are in good agreement with the experimental results. In the case of multiple perforated panel type resonators, as the number of perforated panels increase, the 1st resonance frequency is moved to a low frequency band and sound absorption bandwidth is extended on the whole. In order to obtain excellent absorption performance, the impedance matching between multi-panels should be considered. When the perforated panel in the resonator is combined with a porous material, the absorption performance is highly enhanced in the anti-resonance and high frequency range. In case of the resonator inserted with perforated panels of 2, the 2nd resonance frequency is shifted to a low frequency band in proportion to the distance between perforated panels.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.1-5
• /
• 2000

최근 디지털 텔레비젼전 및 고해상도(High Definition) 텔레비전용 표시장치로 교류형 풀랴즈마 디스플레이가 각광 받고 있다. 상용화되고 있는 교류형 플라즈마 디스플레이의 구조를 보면 3전극행 면방전형(three electrodes surface discharge type)이 주류이다. 재의 효율은 11m/W의 수준으로 본격적인 상용화를 위해서는 효율의 향상이 관건이다. 효율 향상올 위해서는 패널 구조(Panel structure)의 개선도 필요하지만 주어진 구조에서 최대한의 효율을 갖도록하는 구동방법의 최적화가 선결 과제이다. 교류형 플라즈마 디스플레이의 방전 이미지는 연속되는 방전 발광에 의해 이루어 진다. 대부분의 전략 소모는 연속되논 발광을 위한 유지 방전에서 소모되기 때운에 유지방전의 파형의 최적화는 고 방전 효율을 위한 중요한 과제이다. 구동 방식으로서는 ADS(Address and Display period Separated) 구동이라는 방식이 일반적으로 널리 쓰이고 있다. 이 구동법의 평균 유지방전 주파수는 수십 [kHz]이지만 실제 주파수는 100[kHz]에서 200[kHz] 사이의 상당히 높은 값이다. 본 연구 결과에 따르면 형광체가 가시광을 방출시킬 때 형광체 재료의 특성상 감쇄시간(Decay Time)이 수 ms에 이른다. 만약 감쇄 시간이 유지방전 펄스으 주기보다 길다면 방전에서 만들어진 진공자외선(Vacuum Ultra Violet Rav)이 가시광으로 변환애 효과적으로 이용되지 못한다. 결국 발광 효율은 유지방전 주파수에 비례하여 감소한다. 결론적으로 말해 저 주파수 유지 방전으로 발광효율을 크게 개선할 수 있다.