• 제목/요약/키워드: high-capacity

검색결과 8,033건 처리시간 0.035초

경상북도 일반고의 교육역량 강화 방안 탐색을 위한 교육수요자의 인식 분석 (The Study of Educational Consumer's Perception for Exploring Educational Capacity Consolidation Way of General High School in Gyeongsangbuk-do)

  • 정현숙
    • 비교교육연구
    • /
    • 제24권3호
    • /
    • pp.71-99
    • /
    • 2014
  • 본 연구는 고교 다양화 및 특성화고 육성 정책으로 인해 상대적으로 불이익을 받고 있는 일반고의 교육역량 강화 방안을 탐색 제시하기 위해 교육수요자인 학생과 학부모들의 일반고 교육프로그램에 대한 만족도와 선호도를 분석하였다. 이를 토대로 장 단기적인 관점에서 경상북도 일반고의 교육역량을 제고하기 위한 시사점을 도출하는데 그 목적이 있다. 연구대상으로는 경상북도 소재 일반고 총 31개교의 학부모 3,383명, 학생 7,953명의 설문 응답결과를 분석하였다. 분석결과 전반적으로 교육역량강화 정책에서 추진되고 있는 프로그램에 대한 만족도는 중간수준이며, 학부모와 비교했을 때 학생의 만족도가 상대적으로 낮게 나타났다. 학교규모별에서는 소규모학교의 교육프로그램에 대한 학생들과 학부모들의 만족도가 높게 나타나, 소규모 학교가 가지는 협동적 학교조직 문화형성의 중요성이 부각되었다. 실천 전략의 선호도에서는 학교규모별, 신분별로 통계적으로 유의한 차이를 보였다. 향후 일반고 교육역량 강화 전략 수립에서 교육 수요자들의 다양한 요구를 조화롭게 반영할 수 있도록 단위학교별로 전략수립에 자율성을 확대해야 할 것이다.

건미역의 수침에 따른 흡수율과 보수율, 색도 및 무기성분의 함량 변화 (Changes in Water Absorption, Water-holding Capacity, Chromaticity and Mineral Contents of Dried Sea Mustards on Soaking)

  • 한재숙;이연정;이신정
    • 동아시아식생활학회지
    • /
    • 제11권3호
    • /
    • pp.209-218
    • /
    • 2001
  • This study was conducted to examine the water absorption, water-holding capacity, color and mineral contents in natural and cultured dried sea mustards on soaking treatment. Four dried samples of natural and cultured sea mustards were used for the experiments. The effects of soaking treatment on water absorption and water-holding capacity in sea mustards were examined, as the results, these were rapidly accelerated 5 minutes after soaking. It showed that water-holding capacity was significantly high in the case of high absorption of water by soaking. The L, a and b values were increased until 30 minutes after soaking. There was significant difference for potassium content between dried natural and dried cultured sea mustards and the natural sea mustard was 10 times as high as the cultured sample. All mineral elements in these materials were significantly decreased and especially, potassium were significantly more decreased at 50~80% of total content by soaking treatment. Ca/ P ratio in these materials by soaking was about 2~3 : 1 levels.

  • PDF

국외 초고층 건축물의 대형기초 적용 사례 (A Case Study on the Design of High Capacity Foundations for High-Rise Buildings)

  • 조성한;한병권;이제만;김태범
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2007년 가을학술발표회
    • /
    • pp.78-89
    • /
    • 2007
  • Two design examples of deep foundations for high-rise buildings on soft ground are introduced in this paper. The first one is a 54-story building in Ho-Chi-Minh city, Vietnam, which was designed to be founded on $2.8m{\times}1.0m$ barrette foundations with approximately 60m to 75m depth. Based on a number of design guides and existing load test data from the construction sites in Ho-Chi-Minh city, the capacity of a barrette foundation in sand or clay layered ground was calculated to be 17.2MN to 27.8MN depending on the installing depth. The second one is a 40-story building in Baku city, Azerbaijan, which was designed to be supported by 2.0m diameter bored pile foundations with approximately 23m depth. As analytical or empirical guides for the local ground conditions were very limited, the design procedure from the SNiP Code, one of Russian specifications, was adopted and used to calculate the pile capacity. The capacity of bored pile foundation in highly weathered soil was expected to be 14.8MN to 15.5MN depending on the boring depth.

  • PDF

인버터 스크롤 압축기를 사용한 멀티 에어컨의 냉방 특성에 대한 실험적 연구 (Experimental Study on Cooling Characteristics of Multi - Air Conditioner using Inverter Scroll Compressor)

  • 권영철;고국원;진의선;허삼행;전용호;이영덕;박인규
    • 설비공학논문집
    • /
    • 제16권4호
    • /
    • pp.311-317
    • /
    • 2004
  • In the present study, the cooling characteristics of the multi-air conditioner (A/C) using an inverter scroll compressor are experimentally investigated for the number of the indoor units and the operating conditions (2$0^{\circ}C$, 24$^{\circ}C$, 26$^{\circ}C$) under the cooling standard conditions by KS C 9306. In the case of the simultaneous operation for 3 indoor units, the cooling capacity, the mass flow rate and the input power have a decreasing trend and COP has an increasing trend, with decreasing the difference in the operating temperature of the indoor unit and the room temperature. In the case of the simultaneous operation for 2 indoor units, the COP of the indoor unit with large cooling capacity is high when the operating temperature is high, but the COP of the indoor unit with low cooling capacity is high when the operating temperature is low. In the case of the single operation for one unit, when the large cooling capacity of the indoor unit is less than 50% the compressor operates at the minimum operation frequency region and the COP decreases.

히스토그램 이동을 이용한 고용량 리버서블 워터마킹 (A High Capacity Reversible Watermarking Using Histogram Shifting)

  • 배성호
    • 한국멀티미디어학회논문지
    • /
    • 제13권1호
    • /
    • pp.76-82
    • /
    • 2010
  • 리버서블 워터마킹은 디지털 영상에 정보를 은닉하고 인증된 상대에게만 은닉된 정보를 복호화하고 원래의 상태로 영상을 복구하는 방법이다. 본 논문에서는 히스토그램 이동을 이용한 고용량 리버서블 워터마킹을 제안한다. 본 논문에서는 높은 삽입량을 위하여 영상을 $2{\times}2$ 블록으로 분할하고, 각 블록에 수평, 수직, 대각에 대한 화소쌍을 이용하여 가장 빈도가 높은 최대 삽입공간을 찾는다. 최대 삽입공간을 포함하는 위치맵을 이용하여 오버플로우와 언더플로우를 제거하여, 반복적인 워터마크 삽입을 통해 삽입량을 증가시킨다. 실험을 통하여 제안한 방법이 기존의 리버서블 워터마킹 방법과 비교하여 좋은 화질과 높은 삽입량을 나타냄을 확인하였다.

Effect of FRP composites on buckling capacity of anchored steel tanks

  • Al-Kashif, M.A.;Ramadan, H.;Rashed, A.;Haroun, M.A.
    • Steel and Composite Structures
    • /
    • 제10권4호
    • /
    • pp.361-371
    • /
    • 2010
  • Enhancement in the seismic buckling capacity of steel tanks caused by the addition of fiber reinforced polymers (FRP) retrofit layers attached to the outer walls of the steel tank is investigated. Three-dimensional non-linear finite element modeling is utilized to perform such analysis considering non linear material properties and non-linear large deformation large strain analysis. FRP composites which possess high stiffness and high failure strength are used to reduce the steel hoop stress and consequently improve the tank capacity. A number of tanks with varying dimensions and shell thicknesses are examined using FRP composites added in symmetric layers attached to the outer surface of the steel shell. The FRP shows its effectiveness in carrying part of the hoop stresses along with the steel before steel yielding. Following steel yielding, the FRP restrains the outward bulging of the tank and continues to resist higher hoop stresses. The percentage improvement in the ultimate base moment capacity of the tank due to the addition of more FRP layers is shown to be as high as 60% for some tanks. The percentage of increase in the tank moment capacity is shown to be dependent on the ratio of the shell thickness to the tank radius (t/R). Finally a new methodology has been explained to calculate the location of Elephant foot buckling and consequently the best location of FRP application.

방전전압에 따른 리튬 이온 2차전지용 음극물질의 전기화학적 특성 (The electrochemical Characteristics on the Anode Material of Lithium Ion Secondary Batteries with Discharge Voltage)

  • 박종광;한태희;정동철;임성훈;한병성
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제49권6호
    • /
    • pp.328-334
    • /
    • 2000
  • A lithium ion secondary battery using carbon as a negative electrode has been developed. Further improvements to increase the cell capacity are expected by modifying the structure of the carbonaceous material. There are hopes for the development of large capacity lithium ion secondary batteries with long cycle, high energy density, high power density, and high energy efficiency. In the present paper, needle cokes from petroleum were examined as an anode of lithium ion secondary battery. Petroleum cokes, MCL(Molten Caustic Leaching) treated in Korea Institute Energy Research, were carbonized at various temperatures of 0, 500, 700, $19700^{\circ}C$ at heating rate of $2^{\circ}C$/min for lh. The electrolyte was used lM liPF6 EC/DEC (1:1). The voltage range of charge & discharge was 0.0V(0.05V) ~ 2.0V. The treated petroleum coke at $700^{\circ}C$ had an initial capacity over 560mAh.g which beyond the theoretical maximum capacity, 372mAh/g for LiC6. This phenomena suggests that carbon materials with disordered structure had higher cell capacity than that the graphitic carbon materials.

  • PDF

Axial compressive behavior of high strength concrete-filled circular thin-walled steel tube columns with reinforcements

  • Meng Chen;Yuxin Cao;Ye Yao
    • Structural Engineering and Mechanics
    • /
    • 제88권1호
    • /
    • pp.95-107
    • /
    • 2023
  • In this study, circular thin-walled reinforced high strength concrete-filled steel tube (RHSCFST) stub columns with various tube thicknesses (i.e., 1.8, 2.5 and 3.0mm) and reinforcement ratios (i.e., 0, 1.6%, 2.4% and 3.2%) were fabricated to explore the influence of these factors on the axial compressive behavior of RHSCFST. The obtained test results show that the failure mode of RHSCFST transforms from outward buckling and tearing failure to drum failure with the increasing tube thickness. With the tube thickness and reinforcement ratio increased, the ultimate load-carrying capacity, compressive stiffness and ductility of columns increased, while the lateral strain in the stirrup decreased. Comparisons were also made between test results and the existing codes such as AIJ (2008), BS5400 (2005), ACI (2019) and EC4 (2010). It has been found that the existing codes provide conservative predictions for the ultimate load-carrying capacity of RHSCFST. Therefore, an accurate model for the prediction of the ultimate load-carrying capacity of circular thin-walled RHSCFST considering the steel reinforcement is developed, based on the obtained experimental results. It has been found that the model proposed in this study provides more accurate predictions of the ultimate load-carrying capacity than that from existing design codes.

Total antioxidant capacity of the Korean diet

  • Han, Jeong-Hwa;Lee, Hye-Jin;Cho, Mi Ran;Chang, Namsoo;Kim, Yuri;Oh, Se-Young;Kang, Myung-Hee
    • Nutrition Research and Practice
    • /
    • 제8권2호
    • /
    • pp.183-191
    • /
    • 2014
  • BACKGROUND/OBJECTIVES: The objective of this study was to measure and/or estimate the total antioxidant capacity of the Korean diet. MATERIALS/METHODS: Eighty-one plant foods that were expected to exhibit rather high antioxidant activities were selected from the Korean diet using the Fifth Korean National Health and Nutrition Survey (KNHANES V). These foods were categorized into 11 food groups: cereals, potatoes, legumes, nuts, vegetables, kimchies, mushrooms, fruits, fruit juices, sea weeds, and oils. The foods were mixed in the proportions specified in traditional Korean recipes and analyzed. The measured indicators for antioxidant capacities were total phenolics, 2,2-diphenyl-1-picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and Trolox equivalent antioxidant capacity (TEAC). RESULTS: Total phenolics were high in the fruit juices, nuts, vegetables, and fruits; and the average DPPH, ORAC, and TEAC values were high in the vegetables, fruits, fruit juices, and nuts. The correlation coefficient between the content of total phenolics of each food and the in vitro antioxidant capacity was relatively high at 0.851. The intake of total phenolics per capita per day in the Republic of Korea was estimated to be 127 mg. The total dietary antioxidant capacity (TDAC) values, which were obtained from the total antioxidant capacity of each food, taking into account the intake of each food, were 20,763, 54,335, and $876.4{\mu}mol$ of Trolox equivalents using the DPPH, ORAC, and TEAC methods, respectively. The food group that contributed the most to the Korean TDAC was cereals at 39.7%, followed by fruits and vegetables at 27.8% and 13.9%, respectively. The contribution of legumes, nuts, fruit juices, and mushrooms was quite minimal at less than 2% each. CONCLUSIONS: The content of total phenolics and the antioxidant capacity of the Korean diet are significantly correlated and the high contributing food groups are cereals, fruits, and vegetables.