• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.245-248
• /
• 1997

The dielectric resonators(DRs) with dielectric properties are widely used in microwave integrated circuit(MICs) and monolithic microwave integrated circuits(MMICS). The variational method as numerical simulation scheme would be applied to calculate the resonant frequencies(fr) and Q-factors of microwave dielectric resonators. The dielectric resonator with a cylindrical “puck” structure of high dielectric material is modeled in this simulation. The parameters, such as the diameter, the height, and the dielectric constant of dielectric resonator, would determine the resonant frequency and the Q-factor. The relationship between these parameters would effect each other to evaluate the approximate resonant frequency. This simulation method by the variational formula is very effective to calculate fr, and Q-factor. in high frequency microwave dielectric resonator The error rate of the simulation results and the measured results would be considered to design the microwave dielectric resonators.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.86-92
• /
• 1998

High speed wire seam weldability of tin coated thin gage sheet steels was investigated. Thickness and coating weight ranges of the test materials were 0.21~0.35mm and 1.1/1.1~2.8/11.2g/$m^2$, respectively. Test results indicated that the surface roughness value, Rz decreased as increasing the coating weight. The Rz was thought to be one of the important factors to influence the optimum welding condition range, $\triangle$Q. The $\triangle$Q showed close relationship with welding conditions such as welding pressure and travel speed. Higher welding pressure widened the $\triangle$Q while higher travel speed reduced the $\triangle$Q value. Results also demonstrated that tin coating weight should be optimized based on the weldability or the serviceability after welding. At th HAZ of sheet materials with thinner coating layer, tin depleted zone was produced since molten film of the coating material on the base metal agglomerated by the surface tension, which could result in reducing the corrosion resistance of the HAZ in the service environment.

• 미생물학회지
• /
• 제38권4호
• /
• pp.254-259
• /
• 2002

저온에서 최적 생육을 보이는 저온성 균주를 남극해양에서 분리하여 생화학적 특성 및 165 rRNA 염기서열로부터 Shewanella sp.에 속하는 균주로 동정하고 Shewanella sp. L93으로명명하였다. 본 균주에서 생산되는 저온성 세포외 단백질 분해 효소(extracellular protease)를 ammonium sulfate precipitation, High-Q column chromatography, 일차 gel permeation chromatography, BioScale Q2 ion exchange chromatography 및 gel permeation chromatography를 통하여 purification fold 19.3, yield 0.7 %로 정제하였고 그 특성을 조사하였다.

• 한국소음진동공학회논문집
• /
• 제24권5호
• /
• pp.407-413
• /
• 2014

The diesel engine and reduction gear combination is one of the common propulsion system in a naval vessel. Since the diesel engine has torsional vibration caused by reciprocating motion of the mass and gas pressure force of the cylinder, high cycle torsional fatigue can be occurred. Therefore, ROK navy restricts the maximum stress of the propulsion shaft according to MIL G 17859D. In this paper, the root cause for the failure of the diesel engine and reduction gear connecting shaft occurred in typical naval vessel is investigated based on the measured bending and torsional moment according to MIL G 17859D procedure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.258-258
• /
• 2007

일반적인 CMOS공정으로는 높은 주파수 대역에서 높은 Q factor를 갖는 인덕터를 구현하는데 어렵고 이에 반해 RF ICs는 갈수록 high Q를 가지는 인덕터가 요구되고 있다. 이를 LTCC 기판 위에 인덕터를 구현했을 때 놓은 주파수 대역에서 성능을 알아보기 위해 모의 실험하였고, 실제로 구현을 하여 측정결과를 비교해 보았다. LTCC 기판위에 인덕터를 구현 하였을 때 실리콘, 유리 기판위에 인덕터를 구현하였을 때보다 더 높은 Q 값을 측정할 수 있었다. 5GHz 대역에서 실리콘, 유리, LTCC 기판에서 각각 12, 33, 51에 값을 확인할 수 있었다.

• 한국산림과학회지
• /
• 제96권3호
• /
• pp.290-294
• /
• 2007

참나무속(Q. serrata, Q. dentata, Q. mongolica var. crispula, Q. aliena)의 인공교배에 의 한 종간잡종의 묘목을 조취(鳥取)대학농학부 구내의 묘포장에 식재하였다. 또한 조취(鳥取)대학 산산(蒜山)연습림에서 자연교잡종(Q. fabri와 $Q.{\times}mccormickii$) 가계의 묘목을 선발하여 조취(鳥取)대학 산산(蒜山)연습림에 식재하였다. 인공종간잡종 $F_1$은 4년생, 자연교잡종 $F_1$은 3년생 때에 개화하였다. 2001년도에 이 중에서 개화한 개체로부터 화분과 종자를 채취하여 화분의 크기와 임성, 종자의 활력을 조사하였다. 인공종간잡종 화분의 발아율은 1개체를 제외하고 84% 이상이었고, 화분관의 신장도 양호하였다. 인공종간잡종의 건전한 종자의 발아율은 90% 이상으로 양친과 비슷한 높은 발아율을 보였다. 자연잡종 가계의 종자도 건전한 종자의 발아율은 각 가계의 평균이 64% 이상이었고, Q. fabri, $Q.{\times}mccormickii$의 자식종자도 높은 번식 능력을 유지하는 것으로 나타났다.

• 대한의용생체공학회:의공학회지
• /
• 제43권1호
• /
• pp.19-26
• /
• 2022

The Comprehensive in vitro Proarrhythmic Assay(CiPA) project was launched for solving the hERG assay problem of being classified as high-risk groups even though they are low-risk drugs due to their high sensitivity. CiPA presented a protocol to predict drug toxicity using physiological data calculated based on the in-silico model. in this study, features calculated through the in-silico model are analyzed for correlation of changing action potential in the near future, and features are verified through predictive performance according to drug datasets. Using the O'Hara Rudy model modified by Dutta et al., Pearson correlation analysis was performed between 13 features(dVm/dtmax, APpeak, APresting, APD90, APD50, APDtri, Ca_peak, Ca_resting, CaD90, CaD50, CaDtri, qNet, qInward) calculated at 100 pacing, and between dVm/d_{tmax_repol} calculated at 1,000 pacing, and linear regression analysis was performed on each of the 12 training drugs, 16 verification drugs, and 28 drugs. Indicators showing high coefficient of determination(R²) in the training drug dataset were qNet 0.93, AP resting 0.83, APDtri 0.78, Ca resting 0.76, dVm/dt_max 0.63, and APD90 0.61. The indicators showing high determinants in the validated drug dataset were APDtri 0.94, APD90 0.92, APD50 0.85, CaD50 0.84, qNet 0.76, and CaD90 0.64. Indicators with high coefficients of determination for all 28 drugs are qNet 0.78, APD90 0.74, and qInward 0.59. The indicators vary in predictive performance depending on the drug dataset, and qNet showed the same high performance of 0.7 or more on the training drug dataset, the verified drug dataset, and the entire drug dataset.

• Nutrition Research and Practice
• /
• 제7권4호
• /
• pp.309-314
• /
• 2013

This study was conducted to investigate the relationship among the current status of calcium intake from milk and milk products, physical growth and bone mineral density in 664 male and female middle school and high school students aged 15-17 years. In the study, the current status of calcium intake from milk and milk products was analyzed, and the height, body composition, and bone mineral density of the right heel bone (calcaneus) were measured. The daily calcium intake of milk and milk products was calculated as the 'dairy equivalent of calcium', which is the calcium content in 200 mL of white milk. The cutoffs of tertiles of the dairy equivalent of calcium were calculated and then the subjects were categorized into 3 groups according to the tertiles, Q1 group (lower intake group), Q2 group (middle intake group) and Q3 group (upper intake group). The daily calcium intake of milk and milk products in Q1, Q2 and Q3 groups was 16.2 mg, 99.7 mg, and 284.0 mg, respectively, and the ratio of milk and milk product consumption to the daily total calcium intake was 5.4%, 27.4%, and 49.7%, respectively. The ratio of total calcium intake to the daily recommended intake in study subjects was 30.5% in Q1, 42.3% in Q2, and 60.7% in Q3, with significant differences (P < 0.05). Height, body weight, BMI, and % of body fat in three tertile groups (Q1, Q2 and Q3) were not significantly different. However, the T scores for bone mineral density in female students in three tertile groups (Q1, Q2 and Q3) was significantly different (P < 0.05). The study showed that the intake of milk and milk products in adolescents, particularly in girls, can improve the bone mineral density without increasing body weight, and thus confirmed that milk intake is important in adolescence.

• 한국정보시스템학회지:정보시스템연구
• /
• 제29권2호
• /
• pp.131-147
• /
• 2020

Purpose The purpose of this study is to develop intelligent vehicle parking distribution system based on LoRa network at the circumstance of traffic congestion during cultural festival in a local city. This paper proposes a parking dispatch and distribution system using a Q-learning algorithm to rapidly disperse traffics that increases suddenly because of in-bound traffics from the outside of a city in the real-time base as well as to increase parking probability in a parking lot which is widely located in a city. Design/methodology/approach The system get information on realtime-base from the sensor network of IoT (LoRa network). It will contribute to solve the sudden increase in traffic and parking bottlenecks during local cultural festival. We applied the simulation system with Queuing model to the Yudeung Festival in Jinju, Korea. We proposed a Q-learning algorithm that could change the learning policy by setting the acceptability value of each parking lot as a threshold from the Jinju highway IC (Interchange) to the 7 parking lots. LoRa Network platform supports to browse parking resource information to each vehicle in realtime. The system updates Q-table periodically using Q-learning algorithm as soon as get information from parking lots. The Queuing Theory with Poisson arrival distribution is used to get probability distribution function. The Dijkstra algorithm is used to find the shortest distance. Findings This paper suggest a simulation test to verify the efficiency of Q-learning algorithm at the circumstance of high traffic jam in a city during local festival. As a result of the simulation, the proposed algorithm performed well even when each parking lot was somewhat saturated. When an intelligent learning system such as an O-learning algorithm is applied, it is possible to more effectively distribute the vehicle to a lot with a high parking probability when the vehicle inflow from the outside rapidly increases at a specific time, such as a local city cultural festival.

• 한국광학회지
• /
• 제31권6호
• /
• pp.328-333
• /
• 2020

본 논문에서는 Q-polynomial을 이용한 Korsch 망원경의 비구면 반사경 공차 분석을 진행하였다. 고해상도 인공위성의 비구면 반사경은 고정밀 제작이 요구되어 품질을 평가하기 위한 공차 분석이 중요하다. 따라서 비구면을 각 계수항들이 독립적인 Q-polynomial로 표현하고 Korsch 망원경 광학계의 공차 분석을 진행하였다. 또한 비구면 반사경에 형상 오차를 Zernike fringe sag로 부여하여 공차 분석하고 두 결과를 비교하여 Q-polynomial으로도 공차 분석할 수 있음을 확인하였다.