• 전기화학회지
• /
• 제3권1호
• /
• pp.11-14
• /
• 2000

가시광선 영역에서의 높은 투과성과 우수한 전도성을 가진 전도성 ITO박막은 그 전기적 광학적 특성에 의해서 태양 전기 기판의 전극 재료나 Display소자의 투명전극으로 개발되고 있다. 이들의 제작은 현재 sputtering이 주종을 이루나 이들의 높은 생산비를 절감할 목적으로 sol-ge떫을 이용하여 ITO박막을 만들었다. ITO제조용 sol은 유기질 sol로는 indium tri-iso-propoxide를 ethylene glycol monoethyl ether에 녹인 후 $SnCl_4$를 dopant로 사용하여 제조하였다. Acetyl acetone을 넣어 sol이 수화되는 현상을 억제하였다. 무기질 sol로는 indium acetate를 n-propanol에 용해하여 사용하였다. Spin 방법을 이용하여 코팅하였으며 $500^{\circ}C$에서 열처리하였다. 가시 광선 영역에서의 투과도는 $90\%$ 이상을 얻었으며 비저항은 $0.01\Omega{\cdot}cm$가 측정되었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.43.2-43.2
• /
• 2011

Single-walled carbon nanotubes (SWCNT) are transparent in the visible and show conductivity comparable to copper, and are environmentally stable. SWCNT films have high flexibility, conductivity and transparency approaching that indium tin oxide (ITO), and can be prepared inexpensively without vacuum equipment. Transparent conducting Films (TCF) of SWCNTs has the potential to replace conventional transparent conducting oxides (TCO, e.g. ITO) in a wide variety of optoelectronic devices, energy conversion and photovoltaic industry. However, the sheet resistance of SWCNT films is still higher than ITO films. A decreased in the resistivity of SWCNT-TCFs would be beneficial for such an application. We fabricated SWCNT sheet with $KAuBr_4$ on PET substrate. Arc-discharge SWCNTs were dispersed in deionized water by adding sodum dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWCNT was spray-coated on PET substrate and dried on a hotplate at $100^{\circ}C$. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then treated with AuBr4-, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. $HNO_3$ treated SWCNT films with Au nano-particles have the lowest 61 ${\Omega}$/< sheet resistance in the 80% transmittance. Sheet resistance was decreased due to the increase of the hole concentration at the washed SWCNT surface by p-type doping of $AuBr_4{^-}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.44-44
• /
• 2008

To date, rubbing has been widely used to align LC molecules uniformly. Although rubbing can be simple, it has fundamental problems such as the generation of defects by dust and static electricity, and difficulty in achieving a uniform LC alignment on a large substrate. Therefore, non contact alignment has been investigated. Ion beam induced alignment method, which provides controllability, nonstop process, and high resolution display. In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, Polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposure polyimide surface was observed. The tilt angle of NLC on the PI surface with ion beam exposure can be measured under $1^{\circ}$ for all of irradiation angles. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.961-965
• /
• 2010

In this study, we investigated the optical, electrical, and structural properties of the IGZO($In_2O_3:Ga_2O_3:ZnO$=1:9:90 wt.%) thin films prepared by RF-magnetron sputtering system under various substrate temperatures. All of the IGZO thin films shows an average transmittance of over the 80% in visible range. Most of all, deposited IGZO thin film at $100^{\circ}C$ substrate temperature have ZnO (002) of main growth peak and 17.02 nm of increased grains. And also IGZO thin film have low resistivity($1.35{\times}10^{-3}\;\Omega{\cdot}cm$), high carrier concentration($6.62{\times}10^{20} cm^{-3}$) and mobility($80.1 cm^2$/Vsec). IGZO thin film have 2.08 mV at surface potential of electric force microscopy(EFM). We suggest that pre-annealing at $100^{\circ}C$ can be applied for improving optical, electrical and structural properties.

• 한국전기전자재료학회논문지
• /
• 제23권9호
• /
• pp.681-684
• /
• 2010

The $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ multilayered structure for the transparent electrodes in plasma display panel was designed by essential macleod program (EMP) and the multilayered film was deposited on a glass substrate by direct-current (DC)/radio-frequency (RF) magnetron sputtering system. During film deposition process, the Ag layer in $TiO_2$/Ag/$TiO_2$ structure became oxidized and the filter characteristic was degraded easily. In this study, ZnS layer was adopted as a diffusion blocking layer between $TiO_2$ and Ag to prevent the oxidation of Ag layer efficiently in $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ structure. Based on the AES depth profiling analysis, the Ag layer was effectively protected by the ZnS layer as compared with the $TiO_2$/Ag/$TiO_2$ multilayered films without ZnS as an antioxidant layer. The 3 times stacked $TiO_2$/ZnS/Ag/ZnS/$TiO_2$ films have low sheet resistance of $1.22{\Omega}/{\square}$ and luminous transmittance was as high as 62% in the visible ranges.

• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.722-727
• /
• 2017

Transparent ZnS ceramics were synthesized by hydrothermal synthesis ($180^{\circ}C$ for 70 h), and were sintered by a hot press process at $950^{\circ}C$. To confirm the optical properties of the ZnS ceramics after sintering for various sintering holding times, we performed X-ray diffraction analysis, scanning electron microscopy, and Fourier-transform-infrared spectroscopy. The ZnS nanopowders was found to be single-phase (cubic) without any hexagonal phase. However, the hexagonal phase is formed and increases in content with increasing sintering holding time. The density of the ZnS ceramics was above 99.7%, except for the unsintered one. The ZnS ceramics showed high transmittance (~70%) when sintered for more than 2 h.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.204-208
• /
• 2012

$TiO_2$ ($Ti_{1-x}Nb_xO_2$, x= 0.04~0.06) transparent conducting oxide film was fabricated by RF magnetron sputtering process and their electrical, optical, stability properties were studied. When the Nb 4 at% sputtering target was used with RF power 120 W, pressure 8 mTorr, post-annealing temperature $600^{\circ}C$, the resistivity of TNO film was $4{\times}10^{-4}\;{\Omega}-cm$. The optical transmittance in the visible wavelength was ca. 86%. TNO films require heat treatment during or after the deposition process. When the film was deposited at room temperature and post-annealed at $600^{\circ}C$, the lowest resistivity was obtained. When the TNO film was exposed to high temperature and humidity, the resistivity of the film was rather decreased. The stability to temperature and humidity implies that the TNO film could be a appropriate candidate for In-free, ZnO-free transparent conducting oxide materials.

• 대한기계학회논문집A
• /
• 제34권12호
• /
• pp.1857-1863
• /
• 2010

본 논문에서는 탄소나노튜브 필름을 이용한 투명 압저항체의 제작 및 특성 연구를 수행하였다. 진공필터 방식으로 제작된 다양한 투과도를 가지는 탄소나노튜브 필름은 금층이 증착된 실리콘 기판위에서 사진식각 공정을 통해 패터닝이 된 후, 금층과 실리콘 기판의 약한 접착력으로 인해 실리콘 러버인 poly-dimethysiloxane (PDMS) 로 전사된다. 탄소나노튜브 필름의 압저항 특성을 분석하기 위해, 얇은 PDMS 멤브레인의 처짐에 대한 탄소나노튜브 필름의 저항 변화를 측정하여 10-20 의 개이지 팩터를 얻었으며, 인가 압력에 대한 저항 변화 실험을 수행하였다. 본 실험을 통하여 탄소나노튜브 필름은 폴리머 멤스의 다양한 응용분야에 투명한 압저항체로 사용될 수 있을 것으로 판단한다.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.25-29
• /
• 2003

자외선과 전자파를 동시에 차단하는 선글라스렌즈를 제작하기 위하여 유리가판 위에 자성재료인 페라이트에 Ni를 여러 가지 조성비로 첨가한 니켈페라이트 박막 $Ni_xFe_{3-x}O_4$을 페라이트 도금법으로 제작하였다. 이들은 모두 스피넬 구조의 단일상임을 확인할 수 있었으며 육안으로 관찰할 때 거울면과 같은 광택을 가졌으며, 손톱으로 긁었을 때 흠집이 생기지 않는 강도를 보였다. 니켈페라이트는 400nm 부근에서부터 급격히 투과율이 떨어져 자외선을 차단하는데 효과적인 양상을 보이고 있으며 그 중에서 x = 0.09의 Ni 조성비가 자외선 차단효과가 가장 좋은 깃으로 나타났다. 이는 타사제품과 비교하여 자외선 차단효과는 크게 떨어지지 않으므로, 전자파 차단효과가 있는 $Ni_xFe_{3-x}O_4$ 페라이트를 코팅한 선글라스를 착용함으로서 유해전자파와 자외선을 동시에 차단하는 효과를 얻을 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.58-62
• /
• 2017

본 연구에서는 자연광의 효과를 가장 잘 활용할 수 있는 건축구조물인 한국형 유리온실 구조를 축약시킨 유리온실을 기준하여 유리온실의 설계 전 건축방법에 따른 자연광의 효과적인 예측을 위해 조명시뮬레이션을 하고자 한다. 최적 시뮬레이션을 위해 상용화된 여러 가지 조명 소프트웨어들 중에서 AGI32 프로그램을 이용하였다. 그 결과, 유리온실의 삼각구조지붕 꼭지점 위치에 대한 조도 및 균제도(최소조도/평균조도) 분석 결과 자연광 효과에 중요한 인자가 아니며, 하지 일때 자연광의 조도값이 가장 크며 시간도 가장 긴 것을 알 수 있었다. 또한, 유리창의 투과율이 높아짐에 따라 예측되었던 바와 같이 조도 값이 증가하는 것을 확인할 수 있으며 14시일 때가 조도 값이 가장 높으며 이때의 유리 투과율에 따른 조도 변화율은 89 [lux/%]임을 알았다. 또한, 유리온실의 설치 시 배향각은 균제도 특성을 고려하여, 유리온실의 설치 배향각은 $30[^{\circ}]$ 혹은 $150[^{\circ}]$로 하는 것이 자연광 효과를 최대로 할 수 있음을 알았다.