• Fisheries and Aquatic Sciences
• /
• 제14권4호
• /
• pp.323-332
• /
• 2011

To find seasonally optimal microalgae for mass culture of the rotifer Brachionus plicatilis, the growth rates of 12 microalgal species (two marine Chlorella spp., five marine Nannochloris spp., two marine Nannochloropsis spp., one estuarine Nannochloropsis sp., and two estuarine Chlorella spp.) were compared at $25^{\circ}C$ at 15 psu and 30 psu. Among these, six species showing high growth rates were chosen and examined again at high ($30^{\circ}C$ and $32^{\circ}C$) and low ($10^{\circ}C$) temperatures. Their amino and fatty acids and the dietary value of the rotifers that fed on each microalgal species were examined. Nannochloris sp. (KMMCC-119) and Chlorella vulgaris (KMMCC-120) showed the highest growth rates at temperatures over $30^{\circ}C$ and at $10^{\circ}C$, respectively. The growth rate of Nannochloris was higher than those of Chlorella and Nannochloropsis at high temperatures, but lower than those of the latter at low temperatures. The growth rate of rotifers fed on Nannochloropsis was highest and that of those fed on Chlorella was lowest. Levels of eicosapentaenoic acid and docosahexaenoic acid were highest in Nannochloropsis and lowest in Nannochloris. However, total amino acid content was highest in Nannochloris and lowest in Chlorella. In conclusion, Nannochloropsis sp. (KMMCC-33) was the best microalgal species for the mass culture of the rotifer. However, during high- or low-temperature seasons in which Nannochloropsis does not grow well, Nannochloris spp. (KMMCC-119, 395) and C. vulgaris (KMMCC-120) would adequately replace Nannochloropsis sp. (KMMCC-33).

• Architectural research
• /
• 제15권1호
• /
• pp.53-58
• /
• 2013

High strength concrete is being used increasingly in mass structure projects. The purpose of this study is to investigate the influence of temperature during mixing, placing and curing on the strength development, hydration products and pore structures of high strength concrete in mass structures. The experiments were conducted with two different model walls, viz.: 1.5 m and 0.3 m under typical summer and winter weather conditions. The final part of this study deal with the clarification of the relationship between the long-term strength loss and the microstructure of the high strength concrete at high temperatures. Test results indicated that high elevated temperatures in mass concrete structures significantly accelerate the strength development of concrete at the early ages, while the long-term strength development is decreased. The long-term strength loss is caused by the decomposition of ettringite and increased the total porosity and amount of small pores.

• Steel and Composite Structures
• /
• 제2권4호
• /
• pp.247-258
• /
• 2002

The high-temperature material properties of steel are very important to the fire resistance analysis of high-strength bolt connections. This paper reports on the results of the experimental studies on the high-temperature properties of 20 MnTiB steel which is widely used in high-strength bolts, and the friction coefficient of 16Mn steel plates at elevated temperature which is a necessary parameter for bolted frictional connection analysis. The test data includes yield strength, limit strength, modulus of elasticity, elongation and expansion coefficient of 20MnTiB steel at elevated temperature, and the friction coefficients between two 16Mn steel plates under elevated temperatures and after cooling. Based on the data from the tests, the mathematical models for predicting the mechanical properties of 20MnTiB steel and friction coefficients of 16Mn steel plates have been established.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.129-134
• /
• 2004

The development of fabrication processes of polycrystalline-silicon-thin-film transistors (poly-Si TFTs) at low temperatures is reviewed. Rapid crystallization through laser-induced melt-regrowth has an advantage of formation of crystalline silicon films at a low thermal budget. Solid phase crystallization techniques have also been improved for low temperature processing. Passivation of $SiO_2$/Si interface and grain boundaries is important to achieve high carrier transport properties. Oxygen plasma and $H_2O$ vapor heat treatments are proposed for effective reduction of the density of defect states. TFTs with high performance is reported.

• 한국세라믹학회지
• /
• 제16권1호
• /
• pp.21-25
• /
• 1979

This study is proposed to find an appropriate body for high expansion glass ceramics of ${Na}_2O-{Al}_2O_3-{SiO}_2$ system. The compositions of basic glasses are selected to be melted easily and to be crystallized into nepheline with various contents of alumina. The crystallization temperatures of basic glasses are determined by DTA. The crystals in the basic glasses developed by heat treatment are investigated by X-ray diffraction analysis, and thermal properties such as expansion coefficients, fusion points are measured. We find, therefore,that crystallization temperatures, crystal phases and thermal properties are affected by content of alumina.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1699-1702
• /
• 2007

We will discuss encapsulation of OLEDs on both flexible and rigid glass substrates. Accelerated testing at 6CC/90RH and 85C/85RH is compared and acceleration factors for OLED and Calcium test samples are discussed.We have tested the stability and performance of our barrier coating to much higher temperatures: up to 140 C. Water Vapor Transmission rates at temperatures from 60 to 140 C are presented. Rates and methods for low cost manufacturing on a large scale are analysed

• The Plant Pathology Journal
• /
• 제34권1호
• /
• pp.71-77
• /
• 2018

Resistance to Tomato spotted wilt virus isolated from paprika (TSWV-Pap) was overcome at high temperatures ($30{\pm}2^{\circ}C$) in both accessions of Capsicum annuum S3669 (Hana Seed Company) and C. chinense PI15225 (AVRDC Vegetable Genetic Resources). S3669 and PI15225, which carrying the Tsw gene, were mechanically inoculated with TSWV-Pap, and then maintained in growth chambers at temperatures ranging from $15{\pm}2^{\circ}C$ to $30{\pm}2^{\circ}C$ (in $5^{\circ}C$ increments). Seven days post inoculation (dpi), a hypersensitivity reaction (HR) was induced in inoculated leaves of PI152225 and S3669 plants maintained at $25{\pm}2^{\circ}C$. Meanwhile, necrotic spots were formed in upper leaves of 33% of PI15225 plants maintained at $30{\pm}2^{\circ}C$, while systemic mottle symptoms developed in 50% of S3669 plants inoculated. By 15 dpi, 25% of S3669 plants had recovered from systemic mottling induced at $30{\pm}2^{\circ}C$. These results demonstrated that resistance to TSWV-Pap can be overcome at higher temperatures in both C. chinense and C. annuum. This is the first study reporting the determination of temperatures at which TSWV resistance is overcome in a C. annuum genetic resource expressing the Tsw gene. Our results indicated that TSWV resistance shown from pepper plants possess the Tsw gene could be overcome at high temperature. Thus, breeders should conduct evaluation of TSWV resistance in pepper cultivars at higher temperature than $30^{\circ}C$ (constant temperature).

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1161-1171
• /
• 1993

본 연구에서는 모델실험을 통해 실제재료에 관한 정량적인 정보를 얻기 위하 여 모델재료인 플리스티신에 라놀린(lanolin), 레진(resin)등을 첨가하여 새로운 유 동특성을 갖는 혼합 플라스티신을 개발하고자 하였다. 개발된 모델재료와 기존의 플라스티신을 MTS(Material Testing System)을 이용하여 링 압축실험과 실린더 압축 실험으로 온도와 변형률속도 변화에 따라 재료에 혼합된 첨가제가 모델재료의 마찰 특성과 기계적 성질에 미치는 영향을 조사하고 비교 검토하고자 한다. 또한 실제 재료의 다양한 가공공정을 시뮬레이션하기 위한 모델재료의 상사실험에서 다이와 소재 의 분리가 비교적 용이한 윤활제로 실링 페이퍼(sealing paper), 바셀린(vaseline)을 바른 실링페이퍼, 파우다(talc powder)의 마찰특성에 대해서도 연구되었다.그리고 조사된 모델재료들이 연강인 0.15%C강의 고온 (900.deg. C∼1100.deg. C)에서의 온도변화에 따 른 상사재료로 사용될 수 있는지의 타당성을 검토하고자 한다.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.509-523
• /
• 2018

This paper presents experimental results on the residual bond-slip behavior of high strength concrete-filled square steel tube (HSCFST) after elevated temperatures. Three parameters were considered in this test: (a) temperature (i.e., $20^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$); (b) concrete strength (i.e., C60, C70, C80); (c) anchorage length (i.e., 250 mm, 400 mm). A total of 17 HSCFST specimens were designed for push-out test after elevated temperatures. The load-slip curves at the loading end and free end were obtained, in addition, the distribution of steel tube strain and the bond stress along the anchorage length were analyzed. Test results show that the shape of load-slip curves at loading ends and free ends are similar. With the temperature constantly increasing, the bond strength of HSCFST increases first and then decreases; furthermore, the bond strength of HSCFCT proportionally increases with the anchoring length growing. Additionally, the higher the temperature is, the smaller and lower the bond damage develops. The energy dissipation capacity enhances with the concrete strength rasing, while, decreases with the temperature growing. What is more, the strain and stress of steel tubes are exponentially distributed, and decrease from the free end to loading end. According to experimental findings, constitutive formula of the bond slip of HSCFST experienced elevated temperatures is proposed, which fills well with test data.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.43-49
• /
• 2018

The demand for energy storage devices capable of operating at high temperatures is increasing. In order to operate at high temperatures, a device must have excellent thermal stability and no risk of explosion. Ionic liquids are electrolytes that satisfy the above conditions, and studies on improving their performance have attracted great interest. Here, we report the results of a study on the fabrication of a supercapacitor that has a composite electrolyte prepared by dispersing fumed silica in an ionic liquid. The fumed silica filler exhibits improved ionic conductivity and lower interfacial resistance. In particular, the silica nanoparticles with diameters of 10 nm exhibit better electrochemical properties than fillers of other diameters and have excellent device performance of 33 times higher than the pristine ionic liquid at high temperatures. This study can be used to improve the electrolytes of electrochemical devices, such as the next generation battery or lithium ion battery.