• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1034-1042
• /
• 1990

Investigation for the preparation of high strength hardened cement paste using ordinary portland cement, hydroxypropyl methyl cellulose(HPMC) with various admixtures was carried out. The cement paste was mixed with 0.1 of water cement ratio by twin roll mill and cured 60 days in humidity chamber. When the quartz powder or white cement was added to the paste, the flexural strength was 900∼1000kg/㎠ and the Young's modulus was 8∼9×105kg/㎠. When the silicafume was added, the flexural strength was 800kg/㎠ and the Young's modulus was 6×105kg/㎠.

• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1507-1512
• /
• 1994

High strength cement hardened body was prepared by ordinary portland cement, silica-fume, super-plasticizer and the industrial by-product powder such as tailing, paper sludge ash and granulated slag. These raw materials were mixed and formed with w/c=0.18. The cement hardened body is cured in the autoclave at 18$0^{\circ}C$, 10atm. These admixtures made the compressive strength of all specimens develope by 170~230%. The highest compressive strength could be obtained by 236 MPa when mix composition was 14 wt% of silica-fume and 26 wt% of granulated slag. The compressive strength increased with decreasing the average pore size and the amount of the poe over the size of 50 nm by which the appearance of high compressive strength of the cement hardened body were mainly influenced. In the result, the hydration products were C-S-H, tobermorite and ettringite and it was realized that the reason why the cement hardened body became dense and revealed the higher strength was that those hydrates were formed inside of the pore and filled in it and the unhydrated materials played the role of an inner-filler.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.99-105
• /
• 1993

The purpose of this fundamental study is to investigate the mechanism of high strength concrete using the high calcium sulfate cement from a point of view in cement hydration and micro structure. As a results, it was found that the internal pores of concrete are decreased by using the high calcium sulfate cement, because the hydrates of Ettringite which is densified in structure is much formed in early ages at steam curing. In addition to the ettringite needs the 32 times of free water formed mixing water for hydration. This effect are not only decreased the water to cement ratio and also increase to comp, strength of concrete. It was conclude that these above the two facts are the main mechanism of high strength concrete using high calcium sulfate cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.232-238
• /
• 1996

In this paper, the properties of high-strength concrete are described with respect to materials and mix conditions(water-cement ratio, chemical admixture, replacement of fly ash). As primary purposes of this study, the optimum mix design method of high-strength concrete to decrease unit cement contents is investigated, and the properties of fresh and hardened concretes are tested in terms of slump, air content and compressive strength. As results of this study, workability and strength development of the high-strength concrete depend on the water-cement ratio, replacement ratio of fly ash and dosage of the chemical admixture. The conditions which are proposed optimum mix design of the high-strength concrete show W/C 37%, S/A 42~45% and unit cement content 470~480kg/$\textrm{m}^3$. Based on the results, the applicability of high-strength concrete in site is clearly proved.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.179-184
• /
• 2001

The most recent building trend is going large, high rise, high strength as overlarge project is developing in domestic construction business. Belite cement has properties like low heat, excellent long term strength, and durability without admixture(fly ash, silica fume). so, Beilte cement is suitable for mass structure which is needed high strength, high fluidity and low heat property. This study is to examine the possibility if site adoption microwave-use early strength estimation method. Based on the existed study related the portland cement, the interrelation between Belite cement and microwave-use early strength estimation method is required. In this study, interrelation between mortar and Evaluating strength estimation method is investigated before the concrete experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1077-1082
• /
• 2001

The most recent building trend is going large, high rise, high strength as overlarge project is developing in domestic construction business. Belite cement has properties like low heat, excellent long term strength, and durability without admixture(fly ash, silica fume). so, Belite cement is suitable for mass structure which is needed high strength, high fluidity and low heat property. This study is to examine the possibility of site adoption microwave-use early strength estimation method. Based on the existed study related the portland cement, the interrelation between Belite cement and microwave-use early strength estimation method is required. In this study, interrelation between mortar and Evaluating strength estimation method is investigated before the concrete experiment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권1호
• /
• pp.173-179
• /
• 2003

실제 현장에서 사용하고 있는 고강도 콘크리트 배합의 단위시멘트량은 대부분의 경우 소요의 슬럼프를 확보하는데 필요한 양으로 결정된다. 이 방법은 보통 강도 콘크리트의 배합설계 개념을 적용한 것이기 때문에 필요 이상의 단위시멘트량을 사용하게 된다. 따라서 상대적으로 많은 양의 시멘트를 사용하게 되어 콘크리트의 내구성을 저하시키게 된다. 이에 본 연구에서는 고강도 콘크리트의 내구성과 시공성 및 강도를 동시에 고려한 적정 단위시멘트량을 분석하였으며, 적정 단위시멘트량을 사용함에 따른 혼화제 첨가량 및 적정잔골재율에 대해 검토하였다. 실험 결과, 본 연구의 실험조건에서 단위시멘트량을 $370kg/m^3$으로부터 $550kg/m^3$까지 사용하더라도 압축강도의 차이는 거의 없는 것으로 나타났다. 따라서 콘크리트의 배합시 소요의 설계강도뿐만 아니라 내구성과 시공성을 동시에 만족하는 최소의 단위시멘트량을 결정하여 적용하여야 할 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제27권6호
• /
• pp.633-640
• /
• 2015

본 연구는 EVA와 초조강시멘트로 만든 폴리머 시멘트 슬러리(PCS)로 도장한 도장철근의 부착강도 개선에 영향을 미치는 PCS 도장재 배합에 관한 연구로 도장두께, 폴리머 시멘트비, 도장재의 양생재령을 변화시켜 배합을 설정하여 부착강도 시험을 실시하였다. 본 연구결과, PCS 도장철근의 부착강도는 거의 모든 배합에서 도장하지 않은 보통철근 및 에폭시철근에 비해 높은 부착강도를 나타냈는데 도장철근의 최대 부착강도는 보통철근에 비해 1.32배, 에폭시철근에 비해 1.38배 높게 나타났다. 도장두께는 대체로 얇은 도장두께인 $75{\mu}m$와 $100{\mu}m$에서 부착강도가 높게 나타났으며 폴리머 시멘트비에 따른 영향은 크게 나타나지 않았으나, 내구성면에서 폴리머 시멘트비를 80~100% 범위를 확보하는 것을 제안할 수 있었다. 또한 도장재의 양생재령에 있어서는 7일에서 가장 높은 부착강도를 나타냈으나, 재령 1일에 있어서도 보통철근과 에폭시철근에 비해 높은 부착강도를 보여 현장 시공성 측면에서 1일 재령을 제안 할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.295-296
• /
• 2023

This study evaluated the compressive strength after making mortar with low cement composition for carbon-neutral steam curing to respond to climate change. Blast furnace slag, fly ash, and ultra-high powder fly ash were used as substitutes for cement. The cement substitute was used at 40% of the mass of cement, and after steam curing, the compressive strength was measured on the 1st, 3rd, 7th and 28th days of age. As a result of the experiment, at the age of 1 day, the mixture using only cement showed the highest strength, but from the 3rd day, the specimen using ultra-high powder showed a high strength development rate, followed by blast furnace slag and fly ash.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.353-356
• /
• 2005

Strength development of low heat portland cement(Type IV) concrete in high strength range is tested. In this study strength development according to water-binder ratio, strength development according to age, effect of fly ash and super plasticizer are tested. This study tests effect of low heat portland cement in high strength range concrete and provide guide line concrete mix design for later study and/or construction.