• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.23-28
• /
• 2010

HDDR treated anisotropic Nd-Fe-B powders have been widely used for the sheet motors and the sunroof motors of hybrid or electric vehicles, due to their excellent magnetic properties. Microstructural alignment of HDDR treated powders are mostly depending on the hydrogen reaction in disproportionation step, so the specific method to control hydrogenation reaction is required for improving magnetic properties. In disproportionation step, hydrogenation pressure and reaction time were controlled in the range of 0.15~1.0 atm for 15~180 min in order to control the micorstructural alignment of $Nd_2Fe_{14}B$ phase and, at the same time, to improve remanence of HDDR treated magnet powders. In this study, we could obtain a well aligned anisotropic Nd-Fe-B-Ga-Nb alloy powder having high remanence of 12 kG by reducing hydrogen pressure down to 0.3 atm in disproportionation step.

• 한국정보과학회논문지:정보통신
• /
• 제28권4호
• /
• pp.611-620
• /
• 2001

최선의 전송(Best Effort) 서비스를 제공하는 현재의 IP 멀티캐스트 서비스의 특성상 신뢰전송을 요구하는 각종 응용들의 요구를 만족시키기 위해서는 추가적인 신뢰전송 프로토콜이 필요하다. 이러한 요구에 따라 신뢰적인 멀티캐스트 전송 프로토콜에 대한 연구가 수행되고 있는 가운데, 계층적 트리를 구축하여 신뢰성을 보장하는 노력이 활발하게 진행되고 있다. 계층적 트리 기반의 방식은 높은 확장성을 보장하면서 효율적으로 신뢰성을 보장하지만 전송단계에서 효율적인 논리 트리 구축 방안이 제공되어야 한다. 논리적인 제어 트리 구축은 수신자 기반의 상향식 (bottom-up) 방식이 주로 사용되어 왔으나 이 방법은 병렬적 트리 구성을 통하여 신속한 트리 구축을 할 수 있다는 장점이 있지만 제어 트리 상에 루프 (loop)가 발생할 수 있다는 단점과 메시지 부하가 커지는 단점이 있다. 이에 본 논문은 하향식(top-down) 기반의 제어 트리 구축 방안을 제안한다. 하향식 방식은 단계적인 트리 구축을 통하여 루프 발생을 방지 할 수 있다. 또한 성능평가를 통하여 메시지 부하를 줄일 수 있다는 것을 보였다. 본 논문은 응용의 요구 사항에 맞추어 상향식과 하향식을 선택적으로 사용할 것을 제안한다.

• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.49-56
• /
• 2006

양방향 컨버터는 연료전지 발전 시스템의 인버터 dc link와 저전압 배터리를 연결시켜 준다. 방전 모드(boost)에서는 저전압(battery: 48[V])측에서 고전압(dc link: 380[V])측으로, 충전 모드(buck)에서는 저전압측 배터리로 전력이 전달된다. 본 논문에서는 방전모드 시 MOSFET으로 구성된 1.5[kW] 능동 클램프 전류원 풀 브리지 컨버터가 동작하고 배터리 충전 시 IGBT로 구성된 전압원 하프 브리지 컨버터가 동작한다.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.356-365
• /
• 2015

This paper presents a new single phase front-end ac-dc bridgeless power factor correction (PFC) rectifier topology. The proposed converter achieves a high efficiency over a wide range of input and output voltages, a high power factor, low line current harmonics and both step up and step down voltage conversions. This topology is based on a non-inverting buck-boost (Zeta) converter. In this approach, the input diode bridge is removed and a maximum of one diode conducts in a complete switching period. This reduces the conduction losses and the thermal stresses on the switches when compare to existing PFC topologies. Inherent power factor correction is achieved by operating the converter in the discontinuous conduction mode (DCM) which leads to a simplified control circuit. The characteristics of the proposed design, principles of operation, steady state operation analysis, and control structure are described in this paper. An experimental prototype has been built to demonstrate the feasibility of the new converter. Simulation and experimental results are provided to verify the improved power quality at the AC mains and the lower conduction losses of the converter.

• Journal of Microbiology
• /
• 제39권1호
• /
• pp.67-73
• /
• 2001

A validation study was conducted to evaluate the efficacy and mechanism of the cryo-precipitation, monoclonal anti-FVIIIc antibody (mAb) chromatography, Q-Sepharose chromatography, and lyophilization steps involved in the manufacture of high purity factor VIII (GreenMono) from human plasma, in the removal and/or inactivation of hepatitis A virus (HAV). Samples from the relevant stages of the production process were spiked with HAV and subjected to scale-down processes mimicking the manufacture of the high purity factor VIII concentrate. Samples were collected at each step and immediately titrated using a 50% tissue culture infectious dose (TCID$\_$50/) and then the virus reduction factors were evaluated. HAV was effectively partitioned from factor VⅢ during cryo-precipitation with the log reduction factor of 3.2. The mAb chromatography was the most effective step far removal of HAV with the log reduction factor of $\geq$4.3. HAV infectivity was not detected in the fraction of factor VⅢ, while most of HAV infectivity was recovered in the fractions of flow through and wash during mAb chromatography. Q-Sepharose chromatography showed the lowest efficacy for partitioning HAV with the log reduction factor of 0.7. Lyophilization was an effective step in inactivating HAV with the log reduction factor of 2.3. The cumulative lag reduction factor, $\geq$10.5, achieved for tile entire manufacturing process was several magnitudes greater than the potential HAV load of current plasma pools.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2035-2044
• /
• 2016

In order to match the voltages between high voltage battery stacks and low voltage super-capacitors with a high conversion efficiency in hybrid energy sources electric vehicles (HESEVs), a high ratio bidirectional DC-DC converter with a synchronous rectification H-Bridge is proposed in this paper. The principles of high ratio step-down and step-up operations are analyzed. In terms of the bidirectional characteristic of the H-Bridge, the bidirectional synchronous rectification (SR) operation is presented without any extra hardware. Then the SR power switches can achieve zero voltage switching (ZVS) turn-on and turn-off during dead time, and the power conversion efficiency is improved compared to that of the diode rectification (DR) operation, as well as the utilization of power switches. Experimental results show that the proposed converter can operate bidirectionally in the wide ratio range of 3~10, when the low voltage continuously varies between 15V and 50V. The maximum efficiencies are 94.1% in the Buck mode, and 93.6% in the Boost mode. In addition, the corresponding largest efficiency variations between SR and DR operations are 4.8% and 3.4%. This converter is suitable for use as a power interface between the battery stacks and super-capacitors in HESEVs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.189-192
• /
• 2001

This paper proposed that an AC-DC converter system using multiple buck-chopper operates with four choppers connecting to a number of parallel circuits. To improve these, a large number of soft switching topologies included a resonant circuit have been proposed. And, some simulative results on computer are included to confirm the validity of the analytical results. The partial resonant circuit makes use of an inductor using step-down and a condenser of loss-less snubber. The result is that the switching loss is very low and the efficiency of system is high. And the snubber condenser used in a partial resonant circuit makes charging energy regenerated at input power source for resonant operation. The proposed conversion system is deemed the most suitable for high power applications where the power switching devices are used.

• 한국디지털건축인테리어학회논문집
• /
• 제7권1호
• /
• pp.1-6
• /
• 2007

In this study, we fill a person's shoes human knowledge use a computer fast and simple repetition in architecture design. this study are launched from a assumption that a optimized arrangement spaces are able to measure and gauge. but automatic space arrangement program is first step, we have a value that propose a differential cell space and valuation space and process of optimized space arrangement. the merits of this design process are as follows; 1. this program has a advantage high the building-to-land ratio land and business area in space design. 2.this program can design a economy building and calculate rent benefit and calculate cost of construction. 3. this program can adapt for digital GIS. this program can down cost in labor productivity. 5. a layman can design high level. the weak point of this design process are as follows; 1. the design product is simple box shape. 2. this program has a weak in large area and complicated land shape 3. complex use space design are difficult in this program.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.419-420
• /
• 2014

본 논문에서는 넓은 입력 범위와 높은 강압비를 갖는 700W급 DC-DC 컨버터의 구조에 대해 분석한다. 높은 강압비를 위해 2-stage로 구성되는 시스템에 강압을 위한 Buck 컨버터와 Bus 컨버터로 동작하는 Half-bridge LLC 공진형 컨버터 직렬 구성 방법에 따라 달리 설계된 각각의 컨버터에서 발생하는 손실과 출력전압 레귤레이션 특성에 대해 시뮬레이션 툴과 수학적 분석을 통해 분석하였다.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.601-609
• /
• 2017

Gallium nitride (GaN) power switching devices are promising candidates for high switching frequency and high efficiency power conversion due to their fast switching, low on-state resistance, and high-temperature operation capability. In order to facilitate the use of these new devices better, it is required to investigate the device characteristics and performance in detail preferably by comparing with various conventional silicon (Si) devices. This paper presents a comprehensive study of GaN high electron mobility transistor (HEMT) based non-isolated point-of-load (POL) synchronous buck converter operating at 2.7 MHz with a high step-down ratio (24 V to 3.3 V). The characteristics and performance of GaN HEMT and three different Si devices are analytically investigated and the optimal operating point for GaN HEMT is discussed. Zero-voltage switching (ZVS) is implemented to minimize switching loss in high switching frequency operation. The prototype circuit and experimental data support the validity of analytical and simulation results.