• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.135-146
• /
• 2020

In the strawberry cultivation areas and domestic farms, two-spotted spider mites are the most serious pests. It decreases the product yield due to the direct feeding of chlorophyll by the mites resulting in reduced photosynthetic ability of host plant. In this study, a simplified acaricidal effect evaluation system (SAEES) was employed to choose the effective acaricidal products among 10 items based on leaf-dipping bioassay methods. SAEES had the advantage of being able to screen four commercial products with three replications at the same time in the recommended concentration. The susceptible strains (SL_YS) showed a high mortality rate of about 90-100%, whereas the mortality of local strains was differed by each acaricides. It suggests that the acaricide responses of field populations might differ due to spray frequencies and acaricide product. An efficacy index (0.8-1.0) was determined based on the mortality of susceptible strain, which would allow the most effective commercial products to be selected by the range of this index. In summary, SAEES will enable the selection of effective commercial products and contribute to increasing control against T. urticae in strawberries.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.131-142
• /
• 2020

Chrysnathemum stunt viroid (CSVd), a small, single-stranded, infectious RNA, has caused a severe problem in chrysanthemum in the world. In Korea, since CSVd was firstly observed in 1997, the disease has been spread throughout the whole country rapidly. In spite of the seriousness, few methods for control of CSVd have been known without prevention. The use of resistant cultivars is one of the most efficient approaches for overcoming CSVd disease in chrysanthemum cultivation. This study was carried out to identify chrysanthemum genetic resources for the resistance to chrysanthemum stunt viroid (CSVd). A total of 192 commercial cultivars including 167 spray and 25 standard chrysanthemum were screened with CSVd through grafting inoculation method. In most of the inoculated cultivars, typical disease symptoms, stunting of plant height, reduced flower size, and flower color bleaching, were induced. Several cultivars, however, were symptomless or showed delay in symptom expression. Of 192 chrysanthemum cultivars, two cultivars with less than 5% of the average reduction rate of plant height, 'Chiwerel' and 'Jeongheungdaesin', were rated as resistant. And six cultivars less than 20% inculding 'Inga' were rated as moderate resistant. The remaining 184 cultivars with a high level of reduction were rated as susceptible. We expect that these genetic resources can be used in crossbreeding programs for developing CSVd resistant cultivars of chrysanthemum.

• Journal of Plant Biotechnology
• /
• v.49 no.4
• /
• pp.356-361
• /
• 2022

Bacillus sp. is a useful strain for agriculture because it promotes plant growth and controls plant pathogens through a variety of mechanisms. In this study, we obtained a microbial preparation with a high number of viable cells by culturing newly isolated soil bacteria on an optimized medium. Subsequently, we applied this preparation to lettuce to enhance its growth and yield. First, B. amyloliquefaciens ISP-5 was isolated from soil. Next, optimization of culture medium was carried out using 5 L scale fermenters. When culturing B. amyloliquefaciens ISP-5 on this optimized medium, the number of viable cells was approximately 1000 times higher than that obtained from culturing on the commercial medium. Afterwards, the plant growth promotion properties of the ISP-5 strain were evaluated using lettuce as a test plant. Foliar spray treatment of lettuce was carried out by inoculating half the standard concentration suspension (0.5 × 10⁷ cfu/ml). As a result, leaf width increased by 8.6% and leaf length increased by 12.9% compared to the control group. Live weight also increased by 24.2% and dry weight by 23.9%. Considering the results from field test, B. amyloliquefaciens ISP-5 showed potential as a plant growth-promoting bacteria.

• Journal of Korea Foundry Society
• /
• v.43 no.3
• /
• pp.107-136
• /
• 2023

Natural silica sand was commonly used for sand casting of cast steel products, and chromites sand was used to suppress seizure defects due to the lack of thermal properties of silica sand. However there are disadvantages such as deterioration by repeated use, system sand mixing problem, difficulty separating and removing, increased during mold according to high density and to being waste containing chrome. Recently, industrial waste reduction and atmospheric environment improvement have been highlighted as important tasks in the casting industry. In order to solve the problems that occur when using foundry Sand and to improve the environment of casting factories, various artificial sands that can be applied instead of natural silica sand have been developed and introduced. Artificial sands can be classified into artificial sand manufactured by the electric arc atomization or gas flame atomization, artificial sand manufactured by the spray drying & sintering process, artificial sand manufactured by the sintering & crushing process and exhibit different physical properties depending on the type of raw-minerals and manufacturing method. In this study, comparative evaluation tests were conducted on the physical properties of various foundry sands, mold strength, physical durability, thermal durability, and casting test pieces. When comprehensively considering the actual amount of molding sand used according to density, the mold strength according to the shape of sand, the physical and thermal durability of foundry sand, and the heat resistance characteristics of foundry sand, 'Molten artificial sand A1' or 'Molten artificial sand B' is judged to be the most suitable spherical artificial sand for casting of heavy steel castings.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.39-47
• /
• 2024

In this study, LiDAR-detective black material is synthesized by recycling silicon sludge (SS) that is generated from semiconductor manufacturing process, and its recognition is confirmed using two types of LiDAR sensors (MEMS and Rotating LiDAR). In detail, metal impurities on the surface of SS is removed, followed by coating of titanium dioxide (TiO₂) and subsequent chemical reduction to obtain SS-derived black TiO₂ (SS/bTiO₂) material. As-prepared SS/bTiO₂ is mixed with transparent paint to prepare hydrophilic black paints and applied to a glass substrate using a spray gun. SS/bTiO₂-based paint shows similar blackness (L^*=15.7) compared to commercial carbon black-based paint, and remarkable NIR reflectance (26.5R%, 905nm). Furthermore, MEMS and Rotating LiDAR have successfully detected the SS/bTiO₂-based paint. This is attributed to the occurrence of high reflection of light at the interface between the black TiO₂ and the silicon sludge according to the Fresnel's reflection principle. Hence, the new application field to effectively recycle silicon sludge generated in the semiconductor manufacturing process has been presented.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

• Korean journal of applied entomology
• /
• v.51 no.4
• /
• pp.431-438
• /
• 2012

The developmental time of the nymphs of Myzus persicae was studied in the laboratory (six constant temperatures from 15 to $30^{\circ}C$ with 50~60% RH, and a photoperiod of 14L:10D) and in a green-pepper plastic house. Mortality of M. persicae in laboratory was high in the first(6.7~13.3%) and second instar nymphs(6.7%) at low temperatures and high in the third (17.8%) and fourth instar nymphs(17.8%) at high temperatures. Mortality was 66.7% at $33^{\circ}C$ in laboratory and $26.7^{\circ}C$ in plastic house. The total developmental time was the longest at $14.6^{\circ}C$ (14.4 days) and shortest at $26.7^{\circ}C$ (6.0 days) in plastic house. The lower threshold temperature of the total nymphal stage was $3.0^{\circ}C$ in laboratory. The thermal constant required for nymphal stage was 111.1DD. The relationship between developmental rate and temperature was fitted nonlinear model by Logan-6 which has the lowest value on Akaike information criterion (AIC) and Bayesian information criterion (BIC). The distribution of completion of each developmental stage was well described by the 3-parameter Weibull function ($r^2=0.95{\sim}0.97$). This model accurately described the predicted and observed occurrences. Thus the model is considered to be good for use in predicting the optimal spray time for Myzus persicae.

• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.185-192
• /
• 2013

This study was performed to evaluate the spray toxicity and leaf residual toxicity of 52 kinds of insecticides registered for strawberry against adult honeybee Apis mellifera. According to the IOBC standard, the acute toxicity by spraying showed below 30% was classified as non-toxic. Among tested insecticides, 32 insecticides (flonicamid, lufenuron, novaluron, three kinds of acetamiprid, thiacloprid, milbemectin, acequinocyl, TBI-1, two kinds of chlorfenapyr, chlorfluazuron, cyenopyrafen, cyfumetofen, etoxazole, fenpyroximate, flubendiamide, flufenoxuron, hexythiazox, metaflumizone, two kinds of methoxyfenozide, DBB-2032, pyridalyl, spiromesifen, tebufenpyrad, teflubenzuron, acetamiprid + methoxyfenozide, acrinathrin + spiromesifen, bifenazate + spiromesifen, cyenopyrafen + flufenoxuron) did not show any toxic effect, it is thought to be safe. And the others (20 insecticides) showed higher toxicity to honeybee. Insecticides which showed acute toxicity higher than 90% was selected and tested the residual toxicity. All insecticides except emamectin benzoate EC, and indoxacarb SC showed 100% mortality at one day after treatment (DAT). However, the toxicities of emamectin benzoate, indoxacarb SC, and abamectin did not show until 3, 7, 14 DAT, respectively. Nine insecticides such as indoxacarb WP, thiamethoxam WG, abamectin + chlorantraniliprole SC, acetamiprid + etofenprox WP, acetamiprid + indoxacarb WP, bifenthrin + clothianidin SC, bifenthrin + imidacloprid WP, bifenazate + pyridaben SC, chlorfenapyr + clothianidin SC showed over 90% residual toxicity until 31 Day. In pouring treatment, thiamethoxam WG showed 76.9% mortality at 28 DAT and 50.0% mortality at 31 DAT. After 35 days, thiamethoxam WG showed no effect to honeybee. Bifenthrin + clothianidin SC and tefluthrin + thiamethoxam GR showed 57.1 and 80.0% mortality at 24 DAT, respectively. In spraying treatment, thiamethoxam WG and bifenthrin+clothianidin SC showed very high residual toxicity with 100% mortality in thirty-five DAT. After spraying treatment with thiamethoxam WG, bifenthrin+clothianidin SC, bifenthrin + imidacloprid WP, thiamethoxam WG showed 100% residual toxicity until 21 DAT and there was no activity after 28 DAT. Bifenthrin+clothianidin SC and bifenthrin+imidacloprid WP showed very high residual toxicity until 49 DAT.

• Horticultural Science & Technology
• /
• v.34 no.5
• /
• pp.779-789
• /
• 2016

A total of 33 accessions of pepper (Capsicum spp.), including previously reported and newly discovered sources of resistance to bacterial spot caused by Xanthomonas euvesicatoria, were evaluated for their resistance to bacterial spot. The selected accessions were then grown and their horticultural characteristics were recorded. In a test for hypersensitive resistance (HR) to four races (P1, P3, P7, P8) of the pathogen found in Korea, KC00939 and Chilbok No.2, which carry the Bs2 gene, exhibited a hypersensitive response to all four races, as expected. Chilbok No.3, which carries the Bs3 gene, showed a hypersensitive reaction to race 1 and 7, as expected. KC00939 exhibited a high ASTA color value and tolerance to multiple infections from a viral complex of Cucumber mosaic virus (CMV) and Broad bean wilt virus (BBWV). Thus, this accession represents a promising genetic resource for breeding cultivars with multiple disease resistance and strong red coloration. KC01327, KC01617, KC01015, KC01760, KC01779, KC01137, KC01328, KC01006, KC00127, KC01704, and KC00995 did not exhibit hypersensitivity but showed a high level of general resistance when evaluated by spray inoculation. KC01617, KC01760, KC01779, KC01137, KC01704, and KC01777 are newly identified sources of resistance to bacterial spot. The previously and newly identified sources of resistance to bacterial spot evaluated in this study, including information about their resistance to CMV and BBWV complex in the field, the contents of pungent and sweet taste components, and the color values of dry fruits, will be useful for breeding pepper cultivars with resistance to bacterial spot.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.