• 한국컴퓨터산업학회논문지
• /
• 제3권1호
• /
• pp.57-66
• /
• 2002

본 논문에서는 전류모드 CMOS의 기본회로를 이용해 다치 논리(Multiple-Valued Logic) 연산기를 설계하고자 한다. 우선, 2진(Binary)FFT(Fast Fourier Transform)를 확장해 다치 논리회로를 이용해서 고속 다치 FFT 연산기를 구현하였다. 다치 논리회로를 이용해서 구현한 FFT연산은 기존의 2치 FFT과 비교를 해 본 결과 상당히 트랜지스터의 수를 줄일 수 있으며 회로의 간단함을 알 수가 있었다. 또한, 캐리 전파 없는 가산기를 구현하기 위해서 ｛0,1,2,3｝의 불필요한(Redundant) 숫자 집합을 이용한 양의 수 표현을 FFT회로에 내부적으로 이용하여 결선의 감소와 VLSI 설계시 정규성과 규칙성으로 효과적이다. FFT승산을 위해서는 승산기의 연산시간과 면적을 다치 LUT(Look Up Table)로 이용해 승산의 역할을 하였다. 마지막으로 이진시스템(Bin system)과의 호환을 위해 다치 하이브리드형 FFT 프로세서를 제시하여 2진4치 부호기와 4치 2진 복호기 및 전류모드 CMOS회로를 사용하여 상호 호환성을 갖도록 설계를 하였다.

• 한국소프트웨어감정평가학회 논문지
• /
• 제15권1호
• /
• pp.71-78
• /
• 2019

광대역 광통신 시스템에 사용되는 레이저는 우수한 주파수 선택성과 모드 안정성을 가져야한다. DFB(Distributed Feedback) 레이저는 고주파로 전류 변조를 하더라도 발진 주파수의 변화가 적다. 본 연구에서는 무반사 코팅을 하지 않은, 두 거울 면을 가진 1.55um의 파장을 갖는 DFB 레이저에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 시뮬레이션 소프트웨어를 개발하여 종 방향으로의 발진 모드의 빔 분포를 해석하였다. 굴절률 격자와 이득 격자가 거울 면에서 갖는 위상 값의 변화에 따라서 DFB 레이저의 발진 모드에 대한 빔 분포 |R(z)|와 |S(z)|, 그리고 방사전력비 P_l/P_r를 비교 검증하였다. 거울 면에서의 격자 위상에 관계없이 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

• 한국철도학회논문집
• /
• 제18권4호
• /
• pp.309-316
• /
• 2015

고속열차의 외부장치인 선두부 대차 페어링과 팬터그래프에 의한 주행저항 기여도를 차세대 한국형 고속열차(HEMU-430X)를 이용하여 최대 350km/h까지의 타행시험을 통하여 간접적으로 평가하였다. 선두부 대차페어링에 의한 공기저항 저감도를 평가하기 위하여 대차 페어링을 부착 및 탈착 하였을 때 각각 타행시험을 속도대역별로 실시하였다. 또한, 팬터그래프에 의한 공기저항을 측정하기 위하여 팬터그래프를 상승 및 하강 시켰을 때 각각 타행시험을 실시하였다. 타행시험의 결과로부터 시간-속도선도에 대한 가속도를 선형회귀법으로 산출하여 주행저항식으로 도출하였고, 도출된 주행저항식의 공기저항계수 부분을 이용하여 대차 페어링 및 팬터그래프의 공기저항 기여도를 산출하였다. 그 결과 선두부 대차 페어링의 공기저항 감소효과는 약 3.8%이며, 비상모드 팬터그래프는 공기저항을 약 3.9% 증가시키는 것으로 평가되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.275-280
• /
• 2011

Due to high-speed of trains, the track deformation increases rapidly and may lead to track irregularities causing the track stability problem. To secure the track stability, the continual inspection on track irregularities is required. The paper presents a methodology for identifying track irregularity using the NARX neural network considering non-linearity in the train structural system. A simulation study has been carried out to examine the proposed method. Acceleration time history data measured at a bogie were re-sampled to every 0.25m track irregularity. In the simulation study, two sets of measured data were simulated. The second data set was obtained by a train with 10% more mass than the one for the first data set. The first set of simulated data was used to train the series-parallel mode of NARX neural network. Then, the track irregularities at the second time period are identified by using the measured acceleration data. The closeness of the identified track irregularity to the actual one is evaluated by PSD and RMSE.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2006년도 학술대회 1부
• /
• pp.931-936
• /
• 2006

This paper presents different issues of the real-time compression algorithms without compromising the video quality in the distributed environment. The theme of this research is to manage the critical processing stages (speed, information lost, redundancy, distortion) having better encoded ratio, without the fluctuation of quantization scale by using IP configuration. In this paper, different techniques such as distortion measure with searching method cover the block phenomenon with motion estimation process while passing technique and floating measurement is configured by discrete cosine transform (DCT) to reduce computational complexity which is implemented in this video codec. While delay of bits in encoded buffer side especially in real-time state is being controlled to produce the video with high quality and maintenance a low buffering delay. Our results show the performance accuracy gain with better achievement in all the above processes in an encouraging mode.

• 전자공학회논문지C
• /
• 제35C권4호
• /
• pp.60-68
• /
• 1998

In this paper, content addressable momory(CAM) using neural network algorithm is proposed to decrease cell loss and process the large amount of data in streaming mode connectionless server at high speed. To overcome problems of area and power dissipation in look-up table using conventional CAM, the proposed neural network CAM is designed to increase linearly address storage bit about increase of address input bit. Its design and imulation is performed by using VHDL and Compass Tool. Also, its layout is performed by using chip compiler, cell-base P&R tool of compass, in 0.8 .mu.m design rule environment.

• Wind and Structures
• /
• 제10권6호
• /
• pp.543-554
• /
• 2007

The suspension bridge is situated in an area of complex topography with both open sea and overland turbulence characteristics, and it is subject to frequent typhoon occurrences. This paper investigates experimentally the possible vortex shedding events of the structure under high wind and typhoon conditions. A single-degree-of-freedom model for the vibration of a unit bridge deck section is adopted to determine the amplitude of vibration and to estimate the parameters related to the lifting force in a vortex shedding event. The results of the studies are presented in a companion paper (Law, et al. 2007). In this paper, statistical analysis on the measured responses of the bridge deck shows that the vibration response at the first torsional mode of the structure has a significant increase at and beyond the critical wind speed for vortex shedding as noted in the wind tunnel tests on a section model of the structure.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.134-144
• /
• 2017

This paper presents an adaptive control strategy for the speed control of a four-phase switched reluctance motor (SRM) in automotive applications. The main objective is to minimize the torque ripples, despite the unstructured uncertainties, time-varying parameters and external load disturbances. The bound of perturbations is not required to be known in the developing of the proposed adaptive-based control method. In order to achieve a smooth control effort, some properties are incorporated and the proposed control algorithm is constructed using the Lyapunov theorem where the closed-loop stability and robust tracking are ensured. The effectiveness of the proposed controller in rejecting high perturbed load torque with smooth control effort is verified with comparing of an adaptive sliding mode control (ASMC) and validated with experimental results.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.69-80
• /
• 1999

Recently in telecommunication, BISDN ( Broadband Integrated Service Digital Network ) has received considerable attention for its capability of providing a common interface for future communication needs including voice, data and video. Since all information in BISDN are statistically multiplexed and are transported in high speed by means of discrete units of 53-octet ATM ( asynchronous Transfer Mode ) cells, appropriate traffic control needs. For traffic shaping of voice, the output cell discarding scheme has been proposed. We analyze the scheme with a MMPP/$D_1$, $D_2$/1/B queueing system to obtain performance measures such as loss probability and waiting time distribution.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.7-15
• /
• 2009

This paper introduces a new variable valve actuation mechanism with movable second cam center. Valve lift and open duration can be continuously varied according to engine speed and load conditions. A new method to analyze the kinematic relations between the first and second cam profiles and valve motion are also introduced. Because of rocker motion of the second cam, conventional motion conversion program could not be used in this problem. An example shows continuous variations of valve motion and adequate ramp incorporation throughout all valve lift modes. Valve acceleration profile at the high lift mode is similar to that of conventional valvetrains. Contact geometry analysis of the mechanism gives basic information on the load conditions between the components.